Search

The Land Mobile Satellite (LMS) channel at 2 GHz is examined and the first order statistics are modeled using experimental data for two tree shadowing scenarios. Considering that the first order statistics of the channel are used as input to channel models as well as for the calculation of the system margins, the modeling of the probability density function (PDF) and the cumulative distribution function (CDF) of the received signal envelope is of great importance for the design of LMS systems. Experimental data from measurements performed in Prague, the Czech Republic, are presented for two scenarios, a Heavy Tree Shadowing one and an Intermediate Tree Shadowing one. Four of the most widely used distributions, Rayleigh, Rice, Loo and lognormal, are considered for the modeling of the CDF of the signal envelope. Loo and Rice distributions out of the four considered distributions provide the best fit with reference to the measured data. Moreover, analytical empirical expressions are given for the parameters of the Loo distributions as a function of the elevation angle, to be used for the modeling of the LMS channel under tree shadowing. It is found that the expressions for the estimation of the distributions' parameters provide a good fit to the experimental data. [ABSTRACT FROM PUBLISHER]

An extensive measurement campaign, covering a representative set of typical buildings in an urban area and aimed at building penetration loss for satellite services at L-, S- and C-band, was performed in Prague in the summer of 2009. Throughout the measurements, a remote-controlled airship was used as a pseudo-satellite carrying a transmitter which provided unmodulated continuous wave left-handed circularly polarized signals at 2.0 GHz, 3.5 GHz, 5.0 GHz, and 6.5 GHz. A description of the measurement campaign is provided here, together with a thorough analysis of the resulting experimental data. A significant dependence on elevation angle is reported for line-of-sight and non-line-of-sight propagation conditions separately. Subsequent steps to introduce elevation dependent empirical models at corresponding frequencies follow. Finally, a comparison to other studies dealing with building penetration loss for high elevation angles is presented. [ABSTRACT FROM AUTHOR]

Different methods of defining building penetration loss for high elevation angle paths exist. A key factor is the selection of the reference level. A comparison of four of the most common types of reference levels used to determine building penetration loss for high elevation angles is presented based on a measurement trial using unmodulated carriers at 2.0 GHz and 5.0 GHz performed at a three-storey office building. It was shown that the choice of reference level significantly affects the results obtained. Particular cases are discussed and general recommendations on the selection of the reference level for building penetration loss measurement are provided. [ABSTRACT FROM AUTHOR]