Search

We present theoretical and experimental studies of the infrared (IR) spectroscopy, normal Raman spectroscopy (NRS), surface-enhanced Raman spectroscopy (SERS), and surface-enhanced hyper-Raman (SEHRS) spectroscopy of trans-1,2-bis(4-pyridyl)ethylene (BPE). This centrosymmetric molecule is expected to have no common Raman and hyper-Raman lines provided that it is not strongly perturbed by adsorption on the surface. The measured SERS spectrum, obtained under electrochemical conditions on Ag film over nanosphere (AgFON) electrodes, shows a well defined C=C stretch band that is not seen in the SEHRS spectrum, but many of the other bands overlap closely. We use ab initio calculations for isolated BPE to assign the spectra, and find excellent agreement between the calculated and measured IR and SERS spectra, and good agreement between the calculated and measured SEHRS spectrum. We find that the apparently overlapping IR, SERS, and SEHRS bands are in fact due to modes that have similar vibrational characteristics but different symmetry. Our results indicate that SEHRS spectra are consistent with the expected (three photon) selection rules and intensities. This rules out an alternative mechanism in which the observed spectrum arises from surface second harmonic generation (SHG) followed by SERS excited at the second harmonic frequency. © 1996 American Institute of Physics. [ABSTRACT FROM AUTHOR]

Ultrafast surface-enhanced Raman spectroscopy (SERS) has the potential to study molecular dynamics near plasmonic surfaces to better understand plasmon-mediated chemical reactions such as plasmonically-enhanced photocatalytic or photovoltaic processes. This review discusses the combination of ultrafast Raman spectroscopic techniques with plasmonic substrates for high temporal resolution, high sensitivity, and high spatial resolution vibrational spectroscopy. First, we introduce background information relevant to ultrafast SERS: the mechanisms of surface enhancement in Raman scattering, the characterization of plasmonic materials with ultrafast techniques, and early complementary techniques to study molecule–plasmon interactions. We then discuss recent advances in surface-enhanced Raman spectroscopies with ultrafast pulses with a focus on the study of molecule–plasmon coupling and molecular dynamics with high sensitivity. We also highlight the challenges faced by this field by the potential damage caused by concentrated, highly energetic pulsed fields in plasmonic hotspots, and finally the potential for future ultrafast SERS studies. [ABSTRACT FROM AUTHOR]

Simplicity and low cost has positioned inkjet paper- and fabric-based 3D substrates as two of the most commonly used surface-enhanced Raman spectroscopy (SERS) platforms for the detection and the identification of chemical and biological analytes down to the nanogram and femtogram levels. The relationship between far-field and near-field properties of these 3D SERS platforms remains poorly understood and warrants more detailed characterization. Here, we investigate the extremely weak optical scattering observed from commercial and home-fabricated paper-, as well as fabric-based 3D SERS substrates. Using wavelength scanned surface-enhanced Raman excitation spectroscopy (WS-SERES) and finite-difference time-domain (FDTD) calculations we were able to determine their near-field SERS properties and correlate them with morphological and far-field properties. It was found that nanoparticle dimers, trimers, and higher order nanoparticle clusters primarily determine the near-field properties of these substrates. At the same time, the far-field response of 3D SERS substrates either originates primarily from the monomers or cannot be clearly defined. Using FDTD we demonstrate that LSPR bands of nanoparticle aggregates near perfectly overlap with the maxima of the near-field surface-enhanced Raman scattering responses of the 3D SERS substrates. This behaviour of far-field spectroscopic properties and near-field surface-enhanced Raman scattering has not been previously observed for 2D SERS substrates, known as nanorod arrays. The combination of these analytical approaches provides a full spectroscopic characterization of 3D SERS substrates, while FDTD simulation can be used to design new 3D SERS substrates with tailored spectral characteristics. [ABSTRACT FROM AUTHOR]

Amyloid fibrils are β-sheet rich protein aggregates that are strongly associated with various neurodegenerative diseases. Raman spectroscopy has been broadly utilized to investigate protein aggregation and amyloid fibril formation and has been shown to be capable of revealing changes in secondary and tertiary structures at all stages of fibrillation. When coupled with atomic force (AFM) and scanning electron (SEM) microscopies, Raman spectroscopy becomes a powerful spectroscopic approach that can investigate the structural organization of amyloid fibril polymorphs. In this review, we discuss the applications of Raman spectroscopy, a unique, label-free and non-destructive technique for the structural characterization of amyloidogenic proteins, prefibrilar oligomers, and mature fibrils. [ABSTRACT FROM AUTHOR]

Hair is one of the most common types of physical evidence found at a crime scene. Forensic examination may suggest a connection between a suspect and a crime scene or victim, or it may demonstrate an absence of such associations. Therefore, forensic analysis of hair evidence is invaluable to criminal investigations. Current hair forensic examinations are primarily based on a subjective microscopic comparison of hair found at the crime scene with a sample of suspect's hair. Since this is often inconclusive, the development of alternative and more-accurate hair analysis techniques is critical. In this study, we utilized surface-enhanced Raman spectroscopy (SERS) to demonstrate that artificial dyes can be directly detected on hair. This spectroscopic technique is capable of a confirmatory identification of analytes with single molecule resolution, requires minimal sample, and has the advantage of fluorescence quenching. Our study reveals that SERS can (1) identify whether hair was artificially dyed or not, (2) determine if a permanent or semipermanent colorants were used, and (3) distinguish the commercial brands that are utilized to dye hair. Such analysis is rapid, minimally destructive, and can be performed directly at the crime scene. This study provides a novel perspective of forensic investigations of hair evidence. [ABSTRACT FROM AUTHOR]

The potential for discriminating between analytes by their unique vibrational signature makes surface-enhanced Raman scattering (SERS) extremely interesting for chemical detection. However, for molecules that weakly adsorb to non-functionalized plasmonic materials, detection by SERS remains a key challenge. Here we present an approach to SERS-based detection where a polycrystalline metal–organic framework (MOF) film is used to recruit a range of structurally similar volatile organic compounds for detection by SERS. MOF films were grown on the surface of Ag “films-over-nanospheres” (FONs), which have previously been shown to enhance Raman signals of surface adsorbates by a factor of 107. Upon exposing the MOF-coated FON to benzene, toluene, nitrobenzene, or 2,6-di-tert-butylpyridine, the MOF film traps the vapors at the FON surface, allowing the unique Raman spectrum of each vapor to be recorded. By contrast, these analytes do not adsorb to a bare FON surface and thus cannot be detected by conventional SERS substrates. Pyridine was also tested as a Ag-adsorbing control analyte. Concentration dependence and time resolved measurements provide evidence for the hypothesis that the vapors are reversibly adsorbed on the surfaces of MOF nanocrystals exposed at grain boundaries. This represents a generalized approach for confining aromatic molecules through interactions with the MOF surface, which can be applied for future SERS-based sensors. [ABSTRACT FROM AUTHOR]

Surface- and tip-enhanced Raman and LSPR spectroscopies have developed over the past 15 years as unique tools for uncovering the properties of single particles and single molecules that are unobservable in ensemble measurements. Measurements of individual events provide insight into the distribution of molecular properties that are averaged over in ensemble experiments. Raman and LSPR spectroscopy can provide detailed information on the identity of molecular species and changes in the local environment, respectively. In this review a detailed discussion is presented on single-molecule and single-particle Raman and LSPR spectroscopy focusing on the major developments in the fields and applications of the techniques. [ABSTRACT FROM AUTHOR]

Surface-enhanced Raman spectroscopy (SERS) is an ideal tool for analyzing dyes on historical textiles because it requires very little sample compared to other available analytical methods and analysis can be done directly on the fiber. This paper reports on the first systematic study of the use of citrate-reduced silver colloidal pastes for the direct, extractionless, non-hydrolysis detection of dyes directly on wool, silk, cotton, and flax fibers. This type of study provides greater insight into the optimal conditions required for accurate analysis of dyes in historical samples. In this work, Ag colloidal pastes were characterized using localized surface plasmon resonance and scanning electron microscopy. The pastes were then employed for SERS analysis of twelve reference samples of different vegetal and animal fibers dyed with cochineal and eleven dyed with brazilwood. Furthermore, six historical textiles from an important collection of Mariano Fortuny (1871–1949) textiles at the Art Institute of Chicago were also examined, to test the efficacy of the paste on aged samples, and to shed light on Fortuny's fascinating production techniques. A mixture of cochineal and brazilwood was detected in some of the historical samples demonstrating, for the first time, simultaneous identification of these colorants used in combination. In addition, the findings give substance to the claim that Fortuny kept using natural dyes at a time when many new and attractive synthetic products became available. [ABSTRACT FROM AUTHOR]

Surface-enhanced Raman spectroscopy (SERS) is highly dependent upon the substrate, where excitation of the localized metal surface plasmon resonance enhances the vibrational scattering signal of proximate analyte molecules. This article reviews recent progress in the fabrication of SERS substrates and the requirements for characterization of plasmonic materials as SERS platforms. We discuss bottom-up fabrication of SERS substrates and illustrate the advantages of rational control of metallic nanoparticle synthesis and assembly for hot spot creation. We also detail top-down methods, including nanosphere lithography for the preparation of tunable, highly sensitive, and robust substrates, as well as the unique benefits of tip-enhanced Raman spectroscopy for simultaneous acquisition of molecular vibrational information and high spatial resolution imaging. Finally, we discuss future prospects and challenges in SERS, including the development of surface-enhanced femtosecond stimulated Raman spectroscopy, microfluidics with SERS, creating highly reproducible substrates, and the need for reliable characterization of substrates. [ABSTRACT FROM AUTHOR]

Finite element method calculations were carried out to determine extinction spectra and the electromagnetic (EM) contributions to surface-enhanced Raman spectroscopy (SERS) for 90-nm Au nanoparticle dimers modeled after experimental nanotags. The calculations revealed that the EM properties depend significantly on the junction region, specifically the distance between the nanoparticles for spacings of less than 1 nm. For extinction spectra, spacings below 1 nm lead to maxima that are strongly red-shifted from the 600-nm plasmon maximum associated with an isolated nanoparticle. This result agrees qualitatively well with experimental transmission electron microscopy images and localized surface plasmon resonance spectra that are also presented. The calculations further revealed that spacings below 0.5 nm, and especially a slight fusing of the nanoparticles to give tiny crevices, leads to EM enhancements of 1010 or greater. Assuming a uniform coating of SERS molecules around both nanoparticles, we determined that regardless of the separation, the highest EM fields always dominate the SERS signal. In addition, we determined that for small separations less than 3% of the molecules always contribute to greater than 90% of the signal. [ABSTRACT FROM AUTHOR]

Recent developments have greatly improved the sensitivity of optical sensors based on metal nanoparticle arrays and single nanoparticles. We introduce the localized surface plasmon resonance (LSPR) sensor and describe how its exquisite sensitivity to size, shape and environment can be harnessed to detect molecular binding events and changes in molecular conformation. We then describe recent progress in three areas representing the most significant challenges: pushing sensitivity towards the single-molecule detection limit, combining LSPR with complementary molecular identification techniques such as surface-enhanced Raman spectroscopy, and practical development of sensors and instrumentation for routine use and high-throughput detection. This review highlights several exceptionally promising research directions and discusses how diverse applications of plasmonic nanoparticles can be integrated in the near future. [ABSTRACT FROM AUTHOR]

Copyright of Canadian Journal of Chemistry is the property of Canadian Science Publishing and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

A fundamental understanding of electrochemical processes at the nanoscale is crucial to solving problems in research areas as diverse as electrocatalysis, energy storage, biological electron transfer, and plasmon-driven chemistry. However, there is currently no technique capable of directly providing chemical information about molecules undergoing heterogeneous charge transfer at the nanoscale. Tip-enhanced Raman spectroscopy (TERS) uniquely offers subnanometer spatial resolution and single-molecule sensitivity, making it the ideal tool for studying nanoscale electrochemical processes with high chemical specificity. In this work, we demonstrate the first electrochemical TERS (EC-TERS) study of the nanoscale redox behavior of Nile Blue (NB), and compare these results with conventional cyclic voltammetry (CV). We successfully monitor the disappearance of the 591 cm-1 band of NB upon reduction and its reversible reappearance upon oxidation during the CV. Interestingly, we observe a negative shift of more than 100 mV in the onset of the potential response of the TERS intensity of the 591 cm-1 band, compared to the onset of faradaic current in the CV. We hypothesize that perturbation of the electrical double-layer by the TERS tip locally alters the effective potential experienced by NB molecules in the tip-sample junction. However, we demonstrate that the tip has no effect on the local charge transfer kinetics. Additionally, we observe step-like behavior in some TERS voltammograms corresponding to reduction and oxidation of single or few NB molecules. We also show that the coverage of NB is nonuniform across the ITO surface. We conclude with a discussion of methods to overcome the perturbation of the double-layer and general considerations for using TERS to study nanoscale electrochemical processes. [ABSTRACT FROM AUTHOR]

Abstract: This paper summarizes our recent progress toward developing anthrax and glucose sensors based on surface-enhanced Raman spectroscopy (SERS). Ag film over nanosphere (AgFON) substrates was used as the SERS sensor platform in both cases. The AgFON substrates have been optimized for near-infrared (NIR) laser excitations by tuning the extinction maximum of their localized surface plasmon resonance (LSPR). Bacillus subtilis spores, harmless simulants for Bacillus anthracis, were studied using SERS. Calcium dipicolinate, a biomarker for bacillus spores, was efficiently extracted from spores and rapidly detected by SERS. A limit of detection (LOD) of ∼2.6×103 spores, below the anthrax infectious dose of 104 spores, has been achieved within 11min. For glucose detection, a mixed decanethiol (DT)/mercaptohexanol (MH) partition layer is used to bring glucose closer to the AgFON surface. Quantitative detection of glucose in bovine plasma, as well as complete and rapid partitioning and departitioning, was demonstrated. The root mean square error of prediction (RMSEP) is 83.16mg/dL (4.62mM) with 85% of the validation points falling within the A and B range of the Clarke error grid. [Copyright &y& Elsevier]

Ultrahigh vacuum tip-enhanced Raman spectroscopy (UHVTERS) is used to investigate adsorption of molecular oxygen (O2) on cobalt(II) phthalocyanine (CoPc) supported on Ag(111) single crystal surfaces, which is the initial step for the oxygen reduction reaction (ORR) using metal Pc catalysts. Two adsorption configurations are primarily observed, assigned as O2/CoPc/Ag(111) and O/CoPc/Ag(111) based on scanning tunneling microscopy (STM) imaging, TERS, isotopologue substitution, and density functional theory (DFT) calculations. Distinct vibrational features are observed for different adsorption configurations such as the 18O--18O stretching frequency at 1151 cm-1 for O2/CoPc/Ag(111), and Co--16O and Co--18O vibrational frequencies at 661 and 623 cm-1, respectively, for O/CoPc/Ag(111). DFT calculations show vibrational mode coupling of O--O and Co--O vibrations to the Pc ring, resulting in different symmetries of oxygen-related normal modes. This study establishes UHVTERS as a chemically sensitive tool for probing catalytic systems at the molecular scale. [ABSTRACT FROM AUTHOR]

Single-molecule (SM) surface-enhanced Raman spectroscopy (SERS) and tip-enhanced Raman spectroscopy (TERS) have emerged as analytical techniques for characterizing molecular systems in nanoscale environments. SERS and TERS use plasmonically enhanced Raman scattering to characterize the chemical information on single molecules. Additionally, TERS can image single molecules with subnanometer spatial resolution. In this review, we cover the development and history of SERS and TERS, including the concept of SERS hot spots and the plasmonic nanostructures necessary for SM detection, the past and current methodologies for verifying SMSERS, and investigations into understanding the signal heterogeneities observed with SMSERS. Moving on to TERS, we cover tip fabrication and the physical origins of the subnanometer spatial resolution. Then, we highlight recent advances of SMSERS and TERS in fields such as electrochemistry, catalysis, and SM electronics, which all benefit from the vibrational characterization of single molecules. SMSERS and TERS provide new insights on molecular behavior that would otherwise be obscured in an ensemble-averaged measurement. [ABSTRACT FROM AUTHOR]

Molecule-surface interactions and processes are at the heart of many technologies, including heterogeneous catalysis, organic photovoltaics, and nano-electronics, yet they are rarely well understood at the molecular level. Given the inhomogeneous nature of surfaces, molecular properties often vary among individual surface sites, information that is lost in ensemble-averaged techniques. In order to access such site-resolved behavior, a technique must possess lateral resolution comparable to the size of surface sites under study, analytical power capable of examining chemical properties, and single-molecule sensitivity. Tip-enhanced Raman spectroscopy (TERS), wherein light is confined and amplified at the apex of a nanoscale plasmonic probe, meets these criteria. In ultrahigh vacuum (UHV), TERS can be performed in pristine environments, allowing for molecular-resolution imaging, low-temperature operation, minimized tip and molecular degradation, and improved stability in the presence of ultrafast irradiation. The aim of this review is to give an overview of TERS experiments performed in UHV environments and to discuss how recent reports will guide future endeavors. The advances made in the field thus far demonstrate the utility of TERS as an approach to interrogate single-molecule properties, reactions, and dynamics with spatial resolution below 1 nm. [ABSTRACT FROM AUTHOR]

Electrochemical atomic force microscopy tip-enhanced Raman spectroscopy (EC-AFM-TERS) was employed for the first time to observe nanoscale spatial variations in the formal potential, E0', of a surface-bound redox couple. TERS cyclic voltammograms (TERS CVs) of single Nile Blue (NB) molecules were acquired at different locations spaced 5-10 nm apart on an indium tin oxide (ITO) electrode. Analysis of TERS CVs at different coverages was used to verify the observation of single-molecule electrochemistry. The resulting TERS CVs were fit to the Laviron model for surface-bound electroactive species to quantitatively extract the formal potential E0' at each spatial location. Histograms of single-molecule E0' at each coverage indicate that the electrochemical behavior of the cationic oxidized species is less sensitive to local environment than the neutral reduced species. This information is not accessible using purely electrochemical methods or ensemble spectroelectrochemical measurements. We anticipate that quantitative modeling and measurement of site-specific electrochemistry with EC-AFM-TERS will have a profound impact on our understanding of the role of nanoscale electrode heterogeneity in applications such as electrocatalysis, biological electron transfer, and energy production and storage. [ABSTRACT FROM AUTHOR]

Tip-enhanced Raman spectroscopy (TERS) combines the ability of scanning probe microscopy (SPM) to resolve atomic-scale surface features with the single-molecule chemical sensitivity of surface-enhanced Raman spectroscopy (SERS). Here, we report additional insights into the nature of the conformational dynamics of a free-base porphyrin at room temperature adsorbed on a metal surface. We have interrogated the conformational switch between two metastable surface-mediated isomers of meso-tetrakis(3,5-ditertiarybutylphenyl)-porphyrin (H2TBPP) on a Cu(111) surface. At room temperature, the barrier between the porphyrin ring buckled up/down conformations of the H2TBPP-Cu(111) system is easily overcome, and a 2.6 Å lateral resolution by simultaneous TERS and STM analysis is achieved under ultrahigh vacuum (UHV) conditions. This work demonstrates the first UHV-TERS on Cu(111) and shows TERS can unambiguously distinguish the conformational differences between neighboring molecules with Ångstrom-scale spatial resolution, thereby establishing it as a leading method for the study of metal-adsorbate interactions. [ABSTRACT FROM AUTHOR]

This paper demonstrates the direct sensing of glucose at physiologically relevant concentrations with surface-enhanced Raman spectroscopy (SERS) on gold film-over-nanosphere (AuFON) substrates functionalized with bisboronic acid receptors. The combination of selectivity in the bisboronic acid receptor and spectral resolution in the SERS data allow the sensors to resolve glucose in high backgrounds of fructose and, in combination with multivariate statistical analysis, detect glucose accurately in the 1–10 mM range. Computational modeling supports assignments of the normal modes and vibrational frequencies for the monoboronic acid base of our bisboronic acids, glucose and fructose. These results are promising for the use of bisboronic acids as receptors in SERS-based in vivo glucose monitoring sensors. [ABSTRACT FROM AUTHOR]

Tip-enhanced Raman spectroscopy (TERS) is a powerful technique that integrates the vibrational fingerprinting of Raman spectroscopy and the sub-nanometer resolution of scanning probe microscopy (SPM). As a result, TERS is capable of obtaining chemical maps of analyzed specimens with exceptional lateral resolution. This is extremely valuable for the study of interactions between molecules and substrates, in addition to structural characterization of biological objects, such as viruses and amyloid fibrils, 2D polymeric materials, and monitoring electrochemical and photo-catalytic processes. In this mini-review, we discuss the most significant advances of TERS, including: super high resolution chemical imaging, monitoring of catalytic processes, incorporation of pulsed-excitation techniques, single-site electrochemistry, biosensing, and art conservation. We begin with a short overview of TERS, comparing it with other surface analytical techniques, followed by an overview of recent developments and future applications in TERS. [ABSTRACT FROM AUTHOR]

Nanoscale chemical imaging of a dynamic molecular phase boundary has broad implications for a range of problems in catalysis, surface science, and molecular electronics. While scanning probe microscopy (SPM) is commonly used to study molecular phase boundaries, its information content can be severely compromised by surface diffusion, irregular packing, or three-dimensional adsorbate geometry. Here, we demonstrate the simultaneous chemical and structural analysis of N-N'-bis(2,6-diisopropylphenyl)-1,7-(4'-t-butylphenoxy)perylene-3,4:9,10-bis(dicarboximide) (PPDI) molecules by UHV tip-enhanced Raman spectroscopy. Both condensed and diffusing domains of PPDI coexist on Ag(100) at room temperature. Through comparison with time-dependent density functional theory simulations, we unravel the orientation of PPDI molecules at the dynamic molecular domain boundary with unprecedented ~4 nm spatial resolution. [ABSTRACT FROM AUTHOR]

Confirmatory, nondestructive, and noninvasive identification of colorants in situ is of critical importance for the understanding of historical context and for the long-term preservation of cultural heritage objects. Although there are several established techniques for analyzing cultural heritage materials, there are very few analytical methods that can be used for molecular characterization when very little sample is available, and a minimally invasive approach is required. Tip-enhanced Raman spectroscopy (TERS) is a powerful analytical technique whose key features include high mass sensitivity, high spatial resolution, and precise positioning of the tip. In the current proof-of-concept study we utilized TERS to identify indigo dye and iron gall ink in situ on Kinwashi paper. In addition, TERS was used to identify iron gall ink on a historical document with handwritten text dated to the 19th century. We demonstrate that TERS can identify both of these colorants directly on paper. Moreover, vibrational modes from individual components of a complex chemical mixture, iron gall ink, can be identified. To the best of our knowledge, this is the first demonstration of in situ TERS for colorants of artistic relevance directly on historical materials. Overall, this work demonstrates the great potential of TERS as an additional spectroscopic tool for minimally invasive compositional characterization of artworks in situ and opens exciting new possibilities for cultural heritage research. [ABSTRACT FROM AUTHOR]

Surface-enhanced spatially offset Raman spectroscopy (SESORS) is a label-free vibrational spectroscopy that has the potential for in vivo imaging. Previous SESORS experiments have been limited to acquiring spectra using SERS substrates implanted under the skin or from nanoparticles embedded in tissue. Here we present SESORS measurements of SERS active nanoparticles coated with a Raman reporter molecule (nanotags) acquired, for the first time, through bone. We demonstrate the ability of SESORS to measure spectra through various thicknesses (3-8 mm) of bone. We also show that diluted nanotag samples (~2 × 1012 particles) can be detected through the bone. We apply a least-squares support vector machine analysis to demonstrate quantitative detection. It is anticipated that these through-bone SESORS measurements will enable real-time, non-invasive spectroscopic measurement of neurochemicals through the skull, as well as other biomedical applications. [ABSTRACT FROM AUTHOR]

An explanation of the relative intensity fluctuations observed in single-molecule Raman experiments is described utilizing both single-molecule tip-enhanced Raman spectroscopy and time-dependent density functional theory calculations. No correlation is observed in mode to mode intensity fluctuations indicating that the changes in mode intensities are completely independent. Theoretical calculations provide convincing evidence that the fluctuations are not the result of diffusion, orientation, or local electromagnetic field gradients but rather are the result of subtle variations of the excited-state lifetime, energy, and geometry of the molecule. These variations in the excited-state properties will provide information on adsorbate–adsorbate and adsorbate–substrate interactions and may allow for inversion of experimental results to obtain these excited-state properties. [ABSTRACT FROM AUTHOR]

This work demonstrates the development of near-infraredsurface-enhanced Raman spectroscopy (NIR-SERS) for the identificationof eosin Y, an important historical dye. NIR-SERS benefits from theabsence of some common sources of SERS signal loss including photobleachingand plasmonic heating, as well as an advantageous reduction in fluorescence,which is beneficial for art applications. This work also representsthe first rigorous comparison of the enhancement factors and the relativemerits of two plasmonic substrates utilized in art applications; namely,citrate-reduced silver colloids and metal film over nanosphere (FON)substrates. Experimental spectra are correlated in detail with theoreticalabsorption and Raman spectra calculated using time-dependent densityfunctional theory (TDDFT) in order to elucidate molecular structuralinformation and avoid relying on pigment spectral libraries for dyeidentification. [ABSTRACT FROM AUTHOR]

This paper presents the latest progress on quantitative, in vivo, transcutaneous glucose sensing using surface enhanced spatially offset Raman spectroscopy (SESORS). Silver film over nanosphere (AgFON) surfaces were functionalized with a mixed self-assembled monolayer (SAM) and implanted subcutaneously in Sprague-Dawley rats. The glucose concentration was monitored in the interstitial fluid of six separate rats. The results demonstrated excellent accuracy and consistency. Remarkably, the root-mean-square error of calibration (RMSEC) (3.6 mg/dL) and the root-mean-square error of prediction (RMSEP) (13.7 mg/dL) for low glucose concentration (<80 mg/dL) is lower than the current International Organization Standard (ISO/DIS 15197) requirements. Additionally, our sensor demonstrated functionality up 17 days after implantation, including 12 days under the laser safety level for human skin exposure with only one time calibration. Therefore, our SERS based sensor shows promise for the challenge of reliable continuous glucose sensing systems for optimal glycemic control. [ABSTRACT FROM AUTHOR]

Single-molecule surface-enhanced Raman spectroscopy (SMSERS) of crystal violet (CV) has been reported since 1997, yet others have offered alternative explanations that do not necessarily imply SMSERS. Recently, the isotopologue approach, a statistically significant method to establish SMSERS, has been implemented for members of the rhodamine dye family. We provide the first demonstration of SMSERS of a triphenylmethane dye using the isotopologue approach. Two isotopologues of CV are employed to create chemically identical yet vibrationally distinct probe molecules. Experimental spectra were compared extensively with computational simulations to assign changes in mode frequencies upon deuteration. More than 90 silver nanoparticle clusters dosed with a 50:50 mixture of CV isotopologues were spectroscopically characterized, and the vibrational signature of only deuterated or undeuterated CV was observed 79 times, demonstrating that the isotopologue approach for proving SMSERS is applicable to both the CV and the rhodamine systems. The use of CV, a minimally fluorescent dye, allowed direct evaluation of enhancement factors (EF), which are reported herein. Through experiment and theory, we show that molecular electronic resonance Raman (RR) and surface-enhanced Raman effects combine synergistically in SMSERS. Excluding RR effects, the EFSERS is ~109. Variations and relationships between substrate morphology and optical properties are further characterized by correlated SMSERS-localized surface plasmon resonance (LSPR)-high-resolution transmission electron microscopy (HRTEM) studies. We did not observe SMSERS from individual nanoparticles; further, SMSERS-supporting dimers are heterodimers of two disparately sized particles, with no subnanometer gaps. We present the largest collection to date of HRTEM images of SMSERS-supporting nanoparticle assemblies. [ABSTRACT FROM AUTHOR]

This letter presents the first quantitative, in vivo, transcutaneous glucose measurements using surface enhanced Raman spectroscopy (SERS). Silver film over nanosphere (AgFON) surfaces were functionalized with a mixed self-assembled monolayer (SAM) and implanted subcutaneously in a Sprague-Dawley rat. The glucose concentration was monitored in the interstitial fluid. SER spectra were collected from the sensor chip through the skin using spatially offset Raman spectroscopy (SORS). The combination of SERS and SORS is a powerful new approach to the challenging problem of in vivo metabolite and drug sensing. [ABSTRACT FROM AUTHOR]

Understanding the detailed relationship between nanoparticle structure and activity remains a significant challenge for the field of surface-enhanced Raman spectroscopy. To this end, the structural and optical properties of individual plasmonic nanoantennas comprised of Au nanoparticle assemblies that are coated with organic reporter molecules and encapsulated by a Si02 shell have been determined using correlated transmission electron microscopy (TEM), dark-field Rayleigh scattering microscopy, surfaceenhanced Raman scattering (SERS) microscopy, and finite element method (FEM) calculations. The distribution of SERS enhancement factors (EFs) for a structurally and optically diverse set of nanoantennas is remarkably narrow. For a collection of 30 individual nanoantennas ranging from dimers to heptamers, the EFs vary by less than 2 orders of magnitude. Furthermore, the EFs for the hot-spot-containing nanoparticles are uncorrelated to aggregation state and localized surface plasmon resonance (LSPR) wavelength but are crucially dependent on the size of the interparticle gap. This study demonstrates that the creation of hot spots, where two particles are in subnanometer proximity or have coalesced to form crevices, is paramount to achieving maximum SERS enhancements. [ABSTRACT FROM AUTHOR]

Surface-enhanced Raman spectroscopy (SERS) has been developed as a direct, extractionless, nonhydrolysis tool to detect lake pigments and colorants of various classes used in a variety of artist materials. Presented first is the SERS analysis of the natural colorant turmeric (Curcuma longa L), main component curcumin, as present in dry lake pigment grains, dyed textile yarns, and reference paint layers containing the lake pigment bound in animal glue painted on glass. This experiment demonstrated that it is possible to detect the chromophore in various matrixes of increasing complexity, allowing its unambiguous identification in a wide range of artists' materials, even at very low concentration and in the presence of binders such as glue. In addition, removal of the colorant from the complex with the inorganic substrate or mordanted yam was not necessary for identification. This proof-of- concept study was then extended to include analysis of several pastel sticks from a historical pastel box and two samples from a pastel artwork, both attributed to American painter Mary Cassatt (1844-1926). This study represents the first extractionless, nonhydrolysis direct SERS study of multiple artist materials, including identification of natural and synthetic colorants and organic pigments contained in historic artists' pastels spanning a broad range of chemical classes: polyphenols, rhodamines, azo pigments, and anthraquinones. Successful identification is demonstrated on samples as small as a single grain of pigment. [ABSTRACT FROM AUTHOR]

Tailored ad-hoc methods must be developed for successful identification of minute amounts of natural dyes on works of art using Surface-Enhanced Raman Spectroscopy (SERS). This article details two of these successful approaches using silver film over nanosphere (AgFON) substrates and silica gel coupled with citrate-reduced Ag colloids. The latter substrate functions as the test system for the coupling of thin-layer chromatography and SERS (TLC-SERS), which has been used in the current research to separate and characterize a mixture of several artists' dyes. The poor limit of detection of TLC is overcome by coupling with SERS, and dyes which co-elute to nearly the same spot can be distinguished from each other. In addition, in situ extractionless non-hydrolysis SERS was used to analyze dyed reference fibers, as well as historical textile fibers. Colorants such as alizarin, purpurin, carminic acid, lac dye, crocin, and Cape jasmine were thus successfully identified. [ABSTRACT FROM AUTHOR]

The existence of single-molecule surface-enhanced Rarnan spectroscopy (SMSERS) is proven by employing a frequency-domain approach. This is demonstrated using two isotopologues of Rhodamine 6G that offer unique vibrational signatures. When an average of one molecule was adsorbed per silver nanoparticle, only one isotopologue was typically observed under dry N2 environment. Additionally, the distribution of vibrational frequencies hidden under the ensemble average is revealed by examining the single-molecule spectra. Correlation with transmission electron microscopy reveals that SMSERS active aggregates are composed of multiple randomly sized and shaped nanoparticles. At higher coverage and in a humid environment, adsorbate interchange was detected. Using 2D cross correlation, vibrational modes from different isotopologues were anti-correlated, indicating that the dynamic behavior was from multiple molecules competing for a single hot spot. This allows hot-spot diffusion to be directly observed without analyzing the peak intensity fluctuations. [ABSTRACT FROM AUTHOR]

Lactate production under anaerobic conditions is indicative of human performance levels, fatigue, and hydration. Elevated lactate levels result from several medical conditions including congestive heart failure, hypoxia, and diabetic ketoacidosis. Real-time detection of lactate can therefore be useful for monitoring these medical conditions, posttrauma situations, and in evaluating the physical condition of a person engaged in strenuous activity. This paper represents a proof-of-concept demonstration of a lactate sensor based on surface-enhanced Raman spectroscopy (SERS). Furthermore, it points the direction toward a multianalyte sensing platform. A mixed decanethiol/mercaptohexanol partition layer is used herein to demonstrate SERS lactate sensing. The reversibility of the sensor surface is characterized by exposing it alternately to aqueous lactate solutions and buffer without lactate. The partitioning and departitioning time constants were both found to be ∼30 s. In addition, physiological lactate levels (i.e., 6–240 mg/dL) were quantified in phosphate-buffered saline medium using multivariate analysis with a root-mean-square error of prediction of 39.6 mg/dL Finally, reversibility was tested for sequential glucose and lactate exposures. Complete partitioning and departitioning of both analytes was demonstrated. [ABSTRACT FROM AUTHOR]

This paper presents the first in vivo application of surface-enhanced Raman scattering (SERS). SERS was used to obtain quantitative in vivo glucose measurements from an animal model. Silver film over nanosphere surfaces were funclionalized with a two-component self-assembled monolayer, and subcutaneously implanted in a Sprague-Dawley rat such that the glucose concentration of the interstitial fluid could be measured by spectroscopically addressing the sensor through an optical window. The sensor had relatively low error (RMSEC = 7.46 mg/dL (0.41 mM) and RMSEP = 53.42 mg/dL (2.97 mM). [ABSTRACT FROM AUTHOR]

A new method to stabilize and functionalize surfaces for surface-enhanced Raman spectroscopy (SERS) is demonstrated. Atomic layer deposition (ALD) is used to deposit a sub-1-nm alumina layer on silver film-over-nanosphere (AgFON) substrates. The resulting overlayer maintains and stabilizes the SERS activity of the underlying silver while presenting the surface chemistry of the alumina overlayer, a commonly used polar adsorbent in chromatographic separations. The relative affinity of analytes for alumina-modified AgFON substrates can be determined by their polarity. On the basis of SERS measurements, dipicolinic acid displays the strongest binding to the ALD alumina-modified AgFON among a set of pyridine derivatives with varying polarity. This strong affinity for carboxylate groups makes the SERS substrate an ideal candidate for bacillus spores detection using the dipicolinate biomarker. The SERS signal from extracted dipicolinate was measured over the spore concentration range 10-14-10-12 M to determine the saturation binding capacity of the alumina-modified AgFON surface. The adsorption constant was determined to be Kspore = 9.0 × 1013 M-1. A 10-s data collection time is capable of achieving a limit of detection of ∼1.4 × 10³ spores. The shelf life of prefabricated substrates is at least 9 months prior to use. In comparison to the bare AgFON substrates, the ALD-modified AgFON substrates demonstrate twice the sensitivity with 6 times shorter data acquisition time and 7 times longer temporal stability. ALD expands the palette of available chemical methods to functionalize SERS substrates, which will enable improved and diverse chemical control over the nature of analyte–surface binding for biomedical, homeland security, and environmental applications. [ABSTRACT FROM AUTHOR]

A new, mixed decanethiol (DT)/mercaptohexanol (MH) partition layer with dramatically improved properties has been developed for glucose sensing by surface-enhanced Raman spectroscopy. This work represents significant progress toward our long-term goal of a minimally invasive, continuous, reusable glucose sensor. The DT/MH- functionalized surface has greater temporal stability, demonstrates rapid, reversible partitioning and departitioning, and is simpler to control compared to the tri-(ethylene glycol) monolayer used previously. The data herein show that this DT/MH-functionalized surface is stable for at least 10 days in bovine plasma. Reversibility is demonstrated by exposing the sensor alternately to 0 and 100 mM aqueous glucose solutions (pH∼ 7). The difference spectra show that complete partitioning and departitioning occur. Furthermore, physiological levels of glucose in two complex media were quantified using multivariate analysis. In the first system, the sensor is exposed to a solution consisting of water with 1 mM lactate and 2.5 mM urea. The root-mean-squared error of prediction (RMSEP) is 92.17 mg/dL (5.12 mM) with 87% of the validation points falling within the A and B range of the Clarke error grid. In the second, more complex system, glucose is measured in the presence of bovine plasma. The RMSEP is 83.16 mg/dL (4.62 mM) with 85% of the validation points falling within the A and B range of the Clarke error grid. Finally, to evaluate the real-lime response of the sensor, the lie time constant for glucose partitioning and departitioning in the bovine plasma environment was calculated. The time constant is 28 s for partitioning and 25 s for departitioning, indicating the rapid interaction between the SAM and glucose that is essential for continuous sensing. [ABSTRACT FROM AUTHOR]

A rapid detection protocol suitable for use by first-responders to detect anthrax spores using a low-cost, battery-powered, portable Raman spectrometer has been developed. Bacillus subtilis spores, harmless simulants for Bacillus anthracis, were studied using surface-enhanced Raman spectroscopy (SEAS) on silver film over nanosphere (AgFON) substrates. Calcium dipicolinate (CaDPA), a biomarker for bacillus spores, was efficiently extracted by sonication in nitric acid and rapidly detected by SEAS. AgFON surfaces optimized for 750 nm laser excitation have been fabricated and characterized by UV-vis diffuse reflectance spectroscopy and SEAS. The SEAS signal from extracted CaD PA was measured over the spore concentration range of 10-1410-12 M to determine the saturation binding capacity of the AgFON surface and to calculate the adsorption constant (kspore = 1.7 × 10-13 M-1). At present, an 11 mm procedure is capable of achieving a limit of detection (LOD) of ∼2.6 × 103 spores, below the anthrax infectious dose of 1044 spores. The data presented herein also demonstrate that the shelf life of prefabricated AgFON substrates can be as long as 40 days prior to use. Finally, these sensing capabilities have been successfully transitioned from a laboratory spectrometer to a field-portable instrument. Using this technology, 104 bacillus spores were detected with a 5 s data acquisition period on a 1 month old AgFON substrate. The speed and sensitivity of this SEAS sensor indicate that this technology can be used as a viable option for the field analysis of potentially harmful environmental samples. [ABSTRACT FROM AUTHOR]

This work presents the first step toward a glucose biosensor using surface-enhanced Raman spectroscopy (SERS). Historically, glucose has been extremely difficult to detect by SERS because it has a small normal Raman cross section and adsorbs weakly or not at all to bare silver surfaces. In this paper, we report the first systematic study of the direct detection of glucose using SERS. Glucose is partitioned into an alkanethiol monolayer adsorbed on a silver film over nanosphere (AgFON) surface and thereby, it is preconcentrated within the 0-4 nm thick zone of electromagnetic field enhancement. The experiments presented herein utilize leave-one-out partial least-squares (LOO-PLS) analysis to demonstrate quantitative glucose detection both over a large (0-250 mM) and clinically relevant (0-25 mM) concentration range. The root-mean-squared error of prediction (RMSEP) of 1.8 mM (33.1 mg/dL) in the clinical study is near that desired for medical applications (1 mM, 18 mg/dL). Future studies will advance toward true in vivo, real time, minimally invasive sensing. [ABSTRACT FROM AUTHOR]