Search

Germanium–tin nanoparticles are promising materials for near- and mid-infrared photonics thanks to their tunable optical properties and compatibility with silicon technology. This work proposes modifying the spark discharge method to produce Ge/Sn aerosol nanoparticles during the simultaneous erosion of germanium and tin electrodes. Since tin and germanium have a significant difference in the potential for electrical erosion, an electrical circuit damped for one period was developed to ensure the synthesis of Ge/Sn nanoparticles consisting of independent germanium and tin crystals of different sizes, with the ratio of the atomic fraction of tin to germanium varying from 0.08 ± 0.03 to 0.24 ± 0.07. We investigated the elemental and phase composition, size, morphology, and Raman and absorbance spectra of the nanoparticles synthesized under different inter-electrode gap voltages and the presence of additional thermal treatment directly in a gas flow at 750 °C. The research shows that the in-flow thermal treatment of aerosol-agglomerated nanoparticles produced special individual bicrystalline Janus Ge/Sn nanoparticles with an average size of 27 nm and a decreasing absorption function with a changing slope at 700 nm. [ABSTRACT FROM AUTHOR]

An analyzed substance's signal intensity and detection sensitivity in surface-enhanced Raman spectroscopy (SERS) significantly depend on the size and agglomeration degree of nanoparticles (NPs) forming the enhancing structure. Structures were manufactured by aerosol dry printing (ADP), where NPs' agglomeration depends on printing conditions and additional particle modification techniques. The influence of agglomeration degree on SERS signal enhancement was studied in three types of printed structures using the methylene blue model molecule as an analyte. We demonstrated that the ratio between individual NPs and agglomerates in a studied structure strongly affects SERS signal amplification, and structures formed mainly from non-agglomerated NPs enhance the signal better. In this sense, aerosol NPs modified by pulsed laser radiation provide better results than thermally modified NPs, since in laser modification a larger number of individual NPs is observed due to the absence of secondary agglomeration effects in the gas stream. However, increasing gas flow may minimize the secondary agglomeration, since the time allotted for the agglomeration processes is reduced. In this paper, we show how different NPs' agglomeration tendencies influence SERS enhancement to demonstrate the process of using ADP to form inexpensive and highly efficient SERS substrates with huge application potential. [ABSTRACT FROM AUTHOR]

In this work, we have, for the first time, experimentally verified the hypothesis of reducing the agglomeration rate of aerosol nanoparticles produced by spark discharge upon decreasing the carrier gas temperature in the range of 24 °C to –183 °C. The synthesis of nanoparticles was implemented as a result of spark ablation of electrodes manufactured from Au with a purity of 99.998% installed in a specially designed gas chamber dipped into liquid nitrogen (−196 °C) to cool down the carrier gas supplied through one of hollow electrodes. It follows from the analysis of transmission electron microscopy images that both the average size of primary nanoparticles and the degree of their sintering become lower if the gas is cooled. For example, in the case of using nitrogen as a carrier gas, the average size of primary nanoparticles decreases from 9.4 nm to 6.6 nm as the gas temperature decreases from 24 °C to –183 °C. This also causes the aggregates to become more branched, manifested by the reduction in their solidity from 92% to 76%. The agglomeration model of Feng based on Smoluchowski theory was employed to calculate particle size distributions that were found to be consistent with the experimental data. The gold nanoparticles synthesized at room and cryogenic temperatures of the carrier gas (N₂, Ar + H₂, He) were used to pattern plasmonic nanostructures on ceramic alumina substrates by using aerosol jet printing technology for the purpose of demonstrating the possibility of their application in surface-enhanced Raman spectroscopy (SERS). The SERS enhancement factor was estimated at 2 × 106 from the analysis of SERS and normal Raman spectra of 1,2-bis(4-pyridyl)ethylene used as an analyte. [ABSTRACT FROM AUTHOR]

We study vibrational and electronic properties of tin selenide (SnSe) nanowires encapsulated in single walled carbon nanotubes (SWCNT) by combining experimental Raman spectroscopy and density functional theory (DFT) calculations at the Heyd-Scuseria-Ernzerhof (HSE) level. The theoretically investigated standalone SnSe nanowires are Sn 4 Se 4 with square (2 × 2) atomic arrangement and Sn 6 Se 6 with a repeating hexagonal Mo 6 S 6 -like structure. Raman data support the theoretical prediction that the square (2 × 2) nanowires possess specific modes at 151 and 185 cm−1, whereas the hexagonal Sn 6 Se 6 structure is characterized by a mode appearing at ~ 235 cm−1. Calculations predict that the (2 × 2) nanowire has an electronic gap of 1.5 eV and the Sn 6 Se 6 nanowire presents a semi-metallic character. Raman spectra of composite SnSe@SWCNT samples show that the radial breathing mode of the nanotubes is strongly suppressed indicating interaction between SWCNT and the encapsulated SnSe nanowire while the Fano asymmetry parameter of the G band is increased. [Display omitted] • Raman spectra of extreme SnSe 1D crystals embedded in carbon nanotubes. • First use of HSE functional for predicting phonons and band structures in these nanowires. • Presence of encapsulated SnSe modifies the vibrational and electronic properties of the nanotube walls. • SnSe 1D embedded crystals disclose drastic changes in electronic properties with respect to the bulk phase. [ABSTRACT FROM AUTHOR]