Search

Biofilms are a result of bacterial activities and are found everywhere. They often form on metal surfaces and on the surfaces of polymeric compounds. Biofilms are sticky and mostly consist of water. They have a strong resistance to antimicrobial agents and can cause serious problems for modern medicine and industry. Biofilms are composed of extracellular polymeric substances (EPS) such as polysaccharides produced from bacterial cells and are dominated by water at the initial stage. In a series of experiments, using Escherichia coli, we developed three types of laboratory biofilm reactors (LBR) to simulate biofilm formation. For the first trial, we used a rotary type of biofilm reactor for stirring. For the next trial, we tried another rotary type of reactor where the circular plate holding specimens was rotated. Finally, a circular laboratory biofilm reactor was used. Biofilms were evaluated by using a crystal violet staining method and by using Raman spectroscopy. Additionally, they were compared to each other from the practical (industrial) viewpoints. The third type was the best to form biofilms in a short period. However, the first and second were better from the viewpoint of "ease of use". All of these have their own advantages and disadvantages, respectively. Therefore, they should be properly selected and used for specific and appropriate purposes in the future. [ABSTRACT FROM AUTHOR]

Biofilms are the result of bacterial activity. When the number of bacteria (attached to materials' surfaces) reaches a certain threshold value, then the bacteria simultaneously excrete organic polymers (EPS: extracellular polymeric substances). These sticky polymers encase and protect the bacteria. They are called biofilms and contain about 80% water. Other components of biofilm include polymeric carbon compounds such as polysaccharides and bacteria. It is well-known that biofilms cause various medical and hygiene problems. Therefore, it is important to have a sensor that can detect biofilms to solve such problems. Graphene is a single-atom-thick sheet in which carbon atoms are connected in a hexagonal shape like a honeycomb. Carbon compounds generally bond easily to graphene. Therefore, it is highly possible that graphene could serve as a sensor to monitor biofilm formation and growth. In our previous study, monolayer graphene was prepared on a glass substrate by the chemical vapor deposition (CVD) method. Its biofilm forming ability was compared with that of graphite. As a result, the CVD graphene film had the higher sensitivity for biofilm formation. However, the monolayer graphene has a mechanical disadvantage when used as a biofilm sensor. Therefore, for this new research project, we prepared bilayer graphene with high mechanical strength by using the CVD process on copper substrates. For these specimens, we measured the capacitance component of the specimens' impedance. In addition, we have included a discussion about the possibility of applying them as future sensors for monitoring biofilm formation and growth. [ABSTRACT FROM AUTHOR]

N,N-diethyl-N-(2-methancryloylethy)-N-methylammonium bis(trifluoromethylsulfonyl) imide polymer (DEMM-TFSI) brush coated specimens (substrate: glasses) and a liquid ion type of polymer brush coating were investigated for their antifouling effect on biofilms. Biofilms were produced by two kinds of bacteria, E. coli and S. epidermidis. They were formed on specimens immersed into wells (of 12-well plates) that were filled with culture liquids and bacteria. The biofilm formation was observed. Also, brush coated specimens and glass substrates were investigated in the same way. DEMM polymer brush coated specimens formed more biofilm than PMMA (polymethyl methacrylate) polymer brush coated specimens and glass substrates. A greater amount of polarized components of biofilms was also observed for DEMM polymer brush coated specimens. The polar characteristics could be attributed to the attraction capability of bacteria and biofilms on DEMM polymer brush coated specimens. When considering the ease of removing biofilms by washing it with water, the ionic liquid type polymer brush (coated specimens) could be used for antifouling applications. If an initial antifouling application is needed, then the polar characteristics could be adjusted (design of the components and concentrations of ionic liquids, etc.) to solve the problem. [ABSTRACT FROM AUTHOR]

Thus far, biofouling on material surfaces has been investigated from various viewpoints, and concrete methods for its evaluation have been proposed. Biofilms, which are formed by bacterial activities, are essential components of biofouling. They play an important role in the occurrence of biofouling on the materials of structures, which leads to serious economic loss. Therefore, the establishment of countermeasures for biofilm formation and its control are needed urgently. In addition, appropriate evaluation techniques to measure biofilm formation are required. Thus far, we have used scientific evaluation devices and techniques such as an optical microscope and Raman spectroscopy to evaluate biofouling/biofilms. In this study, we used the silane coating of dispersed silver and copper nanopowder rather than that of dispersed organometals. Specimens were immersed into a laboratory biofilm reactor. Then, the biofouling behavior on the sheets was investigated using an optical microscope, Raman spectroscopy, a focused ion beam system (FIB), and scanning electron microscopy (SEM). The optical-microscope observations showed many deposits on the specimens without any metallic dispersions. Although the amount of deposits on the specimens decreased with copper dispersions, many deposits were still observed on them with silver dispersion. These deposits were not confirmed by Raman spectroscopy because of the surface plasmon resonance of silver. Next, we observed and analyzed the specimens using the FIB system (combination of FIB–SEM and EDX) instead of Raman spectroscopy. The SEM image showed that the deposition had formed pores and irregularities on the specimens. FIB–SEM confirmed the existence of deposition on coating layers and revealed that it originated from biooraganisms. Based on these experiments, we could conclude that the structure of antifouling coating could be observed and analyzed using a combination of FIB–SEM and EDX even when other analysis methods are not useful because of various reasons. [ABSTRACT FROM AUTHOR]