Search

Purpose: With the mean lung dose (MLD) as an estimator for the normal tissue complication probability (NTCP) of the lung, we assessed whether the probability of tumor control of lung tumors might be increased by dose escalation in combination with a reduction of field sizes, thus increasing target dose inhomogeneity while maintaining a constant MLD., Methods and Materials: An 8-MV AP-PA irradiation of a lung tumor, located in a cylindrically symmetric lung-equivalent phantom, was modeled using numerical simulation. Movement of the clinical target volume (CTV) due to patient breathing and setup errors was simulated. The probability of tumor control, expressed as the equivalent uniform dose (EUD) of the CTV, was assessed as a function of field size, under the constraint of a constant MLD. The approach was tested for a treatment of a non-small cell lung cancer (NSCLC) patient using the beam directions of the clinically applied treatment plan., Results: In the phantom simulation it was shown that by choosing field sizes that ensured a minimum dose of 95% in the CTV ("conventional" plan) taking into account setup errors and tumor motion, an EUD of the CTV of 43.8 Gy can be obtained for a prescribed dose of 44.2 Gy. By reducing the field size and thus shifting the 95% isodose surface inwards, the EUD increases to a maximum of 68.3 Gy with a minimum dose in the CTV of 55.2 Gy. This increase in EUD is caused by the fact that field size reduction enables escalation of the prescribed dose while maintaining a constant MLD. Further reduction of the field size results in decrease of the EUD because the minimum dose in the CTV becomes so low that it has a predominant effect on the EUD, despite further escalation of the prescribed dose. For the NSCLC patient, the EUD could be increased from an initial 62.2 Gy for the conventional plan, to 83.2 Gy at maximum. In this maximum, the prescribed dose is 88.1 Gy, and the minimum dose in the CTV is 67.4 Gy. In this case, the 95% isodose surface is conformed closely to the "static" CTV during treatment planning., Conclusions: Iso-NTCP escalation of the probability of tumor control is possible for lung tumors by reducing field sizes and allowing a larger dose inhomogeneity in the CTV. Optimum field sizes can be derived, having the highest EUD and highest minimum dose in the CTV under condition of a constant NTCP of the lungs. We conclude that the concept of homogeneous dose in the target volume is not the best approach to reach the highest probability of tumor control for lung tumors.

Background and Purpose: Conformal radiotherapy requires accurate dose calculation at the dose specification point, at other points in the planning target volume (PTV) and in organs at risk. To assess the limitations of treatment planning of lung tumours, errors in dose values, calculated by some simple tissue inhomogeneity correction algorithms available in a number of currently applied treatment planning systems, have been quantified., Materials and Methods: Single multileaf collimator-shaped photon beams of 6, 8, 15 and 18 MV nominal energy were used to irradiate a 50 mm diameter spherical solid tumour, simulated by polystyrene, which was located centrally inside lung tissue, simulated by cork. The planned dose distribution was made conformal to the PTV, which was a 15 mm three-dimensional expansion of the tumour. Values of both the absolute dose at the International Commission on Radiation Units and Measurement (ICRU) reference point and relative dose distributions inside the PTV and in the lung were calculated using three inhomogeneity correction algorithms. The algorithms investigated in this study are the pencil beam algorithm with one-dimensional corrections, the modified Batho algorithm and the equivalent path length algorithm. The calculated data were compared with measurements for a simple beam set-up using radiographic film and ionization chambers., Results: For this specific configuration, deviations of up to 3.5% between calculated and measured values of the dose at the ICRU reference point were found. Discrepancies between measured and calculated beam fringe values (distance between the 50 and 90% isodose lines) of up to 14 mm have been observed. The differences in beam fringe and penumbra width (20-80%) increase with increasing beam energy. Our results demonstrate that an underdosage of the PTV up to 20% may occur if calculated dose values are used for treatment planning. The three algorithms predict a considerably higher dose in the lung, both along the central beam axis and in the lateral direction, compared with the actual delivered dose values., Conclusions: The dose at the ICRU reference point of such a tumour in lung geometry is calculated with acceptable accuracy. Differences between calculated and measured dose distributions are primarily due to changes in electron transport in the lung, which are not adequately taken into account by the simple tissue inhomogeneity correction algorithms investigated in this study. Particularly for high photon beam energies, clinically unacceptable errors will be introduced in the choice of field sizes employed for conformal treatments, leading to underdosage of the PTV. In addition, the dose to the lung will be wrongly predicted which may influence the choice of the prescribed dose level in dose-escalation studies.

Purpose: To develop and verify a multisegment technique for prostate irradiation that results in better sparing of the rectal wall compared to a conventional three-field technique, for patients with a concave-shaped planning target volume (PTV) overlapping the rectal wall., Methods and Materials: Five patients have been selected with various degrees of overlap between PTV and rectal wall. The planned dose to the ICRU reference point is 78 Gy. The new technique consists of five beams, each having an open segment covering the entire PTV and several smaller segments in which the rectum is shielded. Segment weights are computer-optimized using an algorithm based on simulated annealing. The score function to be minimized consists of dose-volume constraints for PTV, rectal wall, and femoral heads. The resulting dose distribution is verified for each patient by using point measurements and line scans made with an ionization chamber in a water tank and by using film in a cylindrical polystyrene phantom., Results: The final number of segments in the five-field technique ranges from 7 to 9 after optimization. Compared to the standard three-field technique, the maximum dose to the rectal wall decreases by approximately 3 Gy for patients with a large overlap and 1 Gy for patients with no overlap, resulting in a reduction of the normal tissue complication probability (NTCP) by a factor of 1.3 and 1.2, respectively. The mean dose to the PTV is the same for the two techniques, but the dose distribution is slightly less homogeneous with the five-field technique (Average standard deviation of five patients is 1.1 Gy and 1.7 Gy for the three-field and five-field technique, respectively). Ionization chamber measurements show that in the PTV, the calculated dose is in general within 1% of the measured dose. Outside the PTV, systematic dose deviations of up to 3% exist. Film measurements show that for the complete treatment, the position of the isodose lines in sagittal and coronal planes is calculated fairly accurately, the maximum distance between measured and calculated isodoses being 4 mm., Conclusions: We developed a relatively simple multisegment "step-and-shoot" technique that can be delivered within an acceptable time frame at the treatment machine (Extra time needed is approximately 3 minutes). The technique results in better sparing of the rectal wall compared to the conventional three-field technique. The technique can be planned and optimized relatively easily using automated procedures and a predefined score function. Dose calculation is accurate and can be verified for each patient individually.