Search

Radiostereometric analysis (RSA) has evolved as gold standard in the evaluation of wear and especially as regards novel hip implant materials. However, several cup shell materials and articulation types used in total hip arthroplasty (THA) cannot be studied due to poor radiographic visibility of the femoral head (FH). We addressed this problem with use of a point transfer function in the RSA software to indirectly measure FH translations with use of stem markers. In a base examination, the stem marker segment and cup center, as an approximation for the FH center position, were mathematically coupled. Thereafter, in subsequent examinations, we used the point transfer function to calculate FH positions from stem marker positions. To determine the variance of the difference of directly and indirectly measured FH positions, four stem marker configurations were studied in THAs with radiographically visible FHs. For the axis with least variance we also compared directly and indirectly measured translation up to 7 years. Finally, we applied the method in a ceramic‐on‐ceramic (COC) articulation and measured proximal translation up to 7 years and also estimated precision. Vertical translations had the smallest variation between measured and calculated FH position. Directly and indirectly measured vertical FH translation correlated well but indirect measurements had increased variance. Proximal steady‐state penetration rate in uncemented COC THA was −0.003 (SD 0.021) mm/year with 99% precision along the vertical axis measuring 0.34 mm. The point transfer function can be used to measure proximal FH penetration, but with less precision than direct RSA. [ABSTRACT FROM AUTHOR]

Background: In an earlier study with a 2-year follow-up of uncemented cups, we had reported low femoral-head penetration of vitamin E-infused highly cross-linked polyethylene liners (E1) compared with highly cross-linked liners without vitamin E (ArComXL). We studied the penetration rate of E1 compared with that of ArComXL, with a focus on changes occurring between 2 and 5 years after total hip arthroplasty.Methods: In this randomized controlled study, we performed radiostereometric analysis of the penetration rate up to 5 years in 63 hips.Results: During the total period of observation, the median proximal penetration for E1, 0.13 mm (mean, 0.11 mm [95% confidence interval (CI), 0.08 to 0.14 mm]), was lower than that for ArComXL, 0.20 mm (mean, 0.22 mm [95% CI, 0.17 to 0.26 mm]). The median proximal penetration rate between 2 and 5 years was 0.02 mm/yr (mean, 0.01 mm/yr [95% CI, 0.01 to 0.02 mm/yr]) for E1 and 0.04 mm/yr (mean, 0.04 mm/yr [95% CI, 0.03 to 0.05 mm/yr) for ArComXL. The corresponding median total (i.e., 3-dimensional resultant) penetration rates were 0.04 mm/yr (mean, 0.04 mm/yr [95% CI, 0.03 to 0.05 mm/yr]) for E1 and 0.07 mm/yr (mean, 0.08 mm/yr [95% CI, 0.06 to 0.10 mm/yr]) for ArComXL.Conclusions: From years 2 to 5, we observed increased penetration in both groups. The penetration rate was higher for ArComXL, resulting in more proximal and total penetration at 5 years than for E1.Level Of Evidence: Therapeutic Level I. See Instructions for Authors for a complete description of levels of evidence. [ABSTRACT FROM AUTHOR]

Bone impaction grafting is a biologically and mechanically appealing option in acetabular revision surgery, allowing restitution of the bone stock and restoration of the biomechanics. We analysed differences in proximal migration of the revision acetabular components when bone impaction grafting is used together with a cemented or an uncemented cup.~Background~Background~43 patients (47 hips), revised due to acetabular loosening and judged to have less than 50% host bone-implant contact were included. The hips were randomised to either an uncemented (n = 20) or a cemented (n = 27) revision cup. Radiostereometry and radiography was performed postoperatively, at 3 and 6 months, 1, 2, 3, 5, 7, 10 and 13 and 17 years postoperatively. Clinical follow-up was performed at 1, 2 and 5 years postoperatively and thereafter at the same interval as in the radiographic follow-up.~Patients and Methods~Methods~There were no differences in the base line demographic data between the 2 groups. At the last follow-up (17 years) 14 hips (10 cemented, 4 uncemented) had been re-revised due to loosening. 3 additional cups (1 uncemented and 2 cemented) were radiographically loose. There was a higher early proximal migration in the cemented cups.~Results~Results~Cups operated on with cement showed a higher early migration measured with RSA and also a higher number of late revisions. The reason for this is not known, but factors such as inclusion of cases with severe bone defects, use of smaller bone chips and issues related to the impaction technique might have had various degrees of influence.~Discussion~Conclusions [ABSTRACT FROM AUTHOR]

ABSTRACT In conventional Radiostereometric analysis (RSA) implants with attached tantalum markers are frequently used, which may be difficult to visualize. This problem can be avoided with model-based RSA (MBRSA), but it is uncertain if this method has the same precision as marker-based RSA. We evaluated the influence of cup design for the precision of MBRSA in four uncemented cups to study if the design had any influence on the precision. Stereo radiographs were analyzed postoperatively (double-examinations) and after 2 years (single examinations). The difference between the double-examinations was used to compute the precision for the methods and for each type of implant. Femoral head penetration and cup translation up to 2 years were compared using marker-based RSA as reference. The precision of proximal penetration and migration measurements did not differ between the methods for Trilogy, TMT and ABG. For Ringloc design a poorer precision was observed using MBRSA. Comparison between the methods regarding proximal penetration and cup migration at 2 years did not differ for three of the designs ( p = 0.12-0.91). However, for the group with porous plasma sprayed surface (Ringloc) a significant difference between the methods was observed ( ppenetration <0.01 and pmigration <0.01). Poorer precision, different penetration and migration values at 2 years for one of the designs indicate that the resolution of MBRSA might vary depending on surface coating and implant geometry. Therefore, we conclude that the resolution of MBRSA has to be studied for each type of basic cup design. © 2016 Orthopaedic Research Society. Published by Wiley Periodicals, Inc. J Orthop Res 35:760-767, 2017. [ABSTRACT FROM AUTHOR]

Background: Radiostereometry (RSA) measurements of early micromotion can predict later failure in hip and knee prostheses. In hip implants, RSA has been particularly helpful in the evaluation of composite-beam stem designs. The Spectron EF Primary stem (Smith & Nephew, London, UK) has shown inferior performance compared with its predecessors in both clinical studies and registry reports. Early RSA studies have shown somewhat greater subsidence for the Spectron EF Primary stem compared with the earlier Spectron EF, but still within boundaries considered to be safe.Questions/purposes: Our primary research question was whether stem subsidence and rotation for this stem design measured with RSA at 2 years can predict later stem failure. A secondary question was whether high femoral stem offset and small stem sizes, both features specific to the Spectron EF Primary stem compared with its predecessors, are associated with stem failure rate.Methods: Two hundred forty-seven hips (209 patients with median age 63 years [range, 29-80 years], 65% female, and 77% primary osteoarthritis) with a valid RSA examination at 2 years were selected from four different RSA studies (totaling 279 hips in 236 patients) in our department. The studies were primarily aimed at evaluating cup fixation, bone cement, and polyethylene types. All study patients received a cemented Spectron EF Primary stem. The selected hips had complete followup until stem failure, death, or the end of the followup period. Stem failure was defined as revision of a loose femoral stem or radiological failure with significant osteolysis in Gruen zones 2 to 6. Cox regression analyses were performed to evaluate if stem subsidence and rotation after 2 years, adjusted for age, sex, stem size, standard/high stem offset, and conventional/highly crosslinked polyethylene, could predict later clinical aseptic failure of the stem. We identified 32 stem failures (27 revisions, five radiological failures) at 14 years median followup (range, 3-18 years). Ten-year stem survival was 94% (95% confidence interval [CI], 90%-96%).Results: Stem subsidence at 2 years (adjusted hazard ratio [HR], 6.0; 95% CI, 2.5-15; p < 0.001) and retrotorsion of the stem (adjusted HR, 1.7; 95% CI, 1.1-2.5; p = 0.018) were associated with later stem failure. Further risk factors were male sex (subsidence analysis HR, 6.9; p > 0.001), use of the two smallest stem sizes (HRsize 1, 8.0; p > 0.001, HRsize 2, 1 [reference], HRsize 3+, 0.06; p = 0.035), and the high offset option (HR, 3.1; p = 0.005).Conclusions: Stem subsidence and retrotorsion at 2 years can predict later failure in the Spectron EF Primary stem, consistent with earlier findings on composite-beam cemented stems. Small stem size and high-offset stems comprise the main group of underperforming stems. We recommend that premarket small-scale RSA studies be performed after any design change to a THA femoral component, because even seemingly minor design changes may unexpectedly result in inferior performance.Level Of Evidence: Level III, therapeutic study. [ABSTRACT FROM AUTHOR]