Search

Following the launch of the ZY1-02E satellite, the thermal infrared sensor aboard the satellite experienced alterations in the space environment, leading to varying degrees of attenuation in some components. The laboratory calibration accuracy could not satisfy the demands of quantitative production, and a certain degree of deviation was observed in on-orbit calibration. To accurately characterize the on-orbit radiation properties of thermal infrared remote sensing payloads, an absolute radiometric calibration campaign was carried out at the Ulansuhai Nur and Baotou calibration sites in Inner Mongolia in July 2022. This paper outlines the processes of onboard calibration and vicarious calibration for the ZY1-02E satellite, comparing the outcomes of onboard calibration with those of vicarious calibration. The onboard calibration method involved internal calibration, while the vicarious calibration method utilized an on-orbit absolute radiometric calibration technique based on various natural features that were not constrained by satellite–Earth spectrum matching requirements. Calibration coefficients were acquired, and the absolute radiometric calibration results of on-orbit vicarious and onboard calibration were compared, analyzed, and verified using the radiance computed from measured data and the reference sensor data. The accuracy of on-orbit absolute vicarious calibration was determined, and the causes for the decline in the radiation calibration accuracy on the orbiting satellite were examined. The findings revealed that the vicarious calibration results exhibited a lower percentage of radiance deviation compared with the onboard calibration results, meeting the quantitative requirements of remote sensing data. These results were significantly better than those obtained from onboard blackbody calibration, offering a data foundation for devising satellite calibration plans and enhancing calibration algorithms. In the future, the developmental trend of on-orbit radiometric calibration technology will encompass high-precision and slow-attenuation onboard calibration techniques, as well as high-frequency and simplified-step vicarious calibration methods. [ABSTRACT FROM AUTHOR]

The ZY1-02E satellite carrying a thermal infrared sensor was successfully launched from the Taiyuan Satellite Launch Center on 26 December 2021. The quantitative characteristics of this thermal infrared camera, for use in supporting applications, were acquired as part of an absolute radiometric calibration campaign performed at the Ulansuhai Nur and Baotou calibration site (Inner Mongolia, July 2022). In this paper, we propose a novel on-orbit absolute radiometric calibration technique, based on multiple ground observations, that considers the radiometric characteristics of the ZY1-02E thermal infrared sensor. A variety of natural surface objects were selected as references, including bodies of water, bare soil, a desert in Kubuqi, and sand and vegetation at the Baotou calibration site. During satellite overpass, the 102F Fourier transform thermal infrared spectrometer and the SI-111 infrared temperature sensor were used to measure temperature and ground-leaving radiance for these surface profiles. Atmospheric water vapor, aerosol optical depth, and ozone concentration were simultaneously obtained from the CIMEL CE318 Sun photometer and the MICROTOP II ozonometer. Atmospheric profile information was acquired from radiosonde instruments carried by sounding balloons. Synchronous measurements of atmospheric parameters and ECMWF ERA5 reanalysis data were then combined and input to an atmospheric radiative transfer model (MODTRAN6.0) used to calculate apparent radiance. Calibration coefficients were determined from the measured apparent radiance and satellite-observed digital number (DN), for use in calculating the on-orbit observed radiance of typical surface objects. These values were then compared with the apparent radiance of each object, using radiative transfer calculations to evaluate the accuracy of on-orbit absolute radiometric calibration. The results show that the accuracy of this absolute radiometric calibration is better than 0.6 K. This approach allows the thermal infrared channel to be unrestricted by the limitations of spectrum matching between a satellite and field measurements, with strong applicability to various types of calibration sites. [ABSTRACT FROM AUTHOR]

In this paper, an irradiance-based absolute radiometric calibration campaign at Baotou calibration site during June and July 2018 was described. This radiometric calibration campaign made use of six radiometric calibration tarps. The synchronous measurements of parameters such as surface reflectance, atmospheric parameters, and diffuse-to-global irradiance ratio were collected at the satellite overpass. The top-of-atmospheric radiance was predicted by radiative transfer model with these synchronous measurements. The linear relationship between DNs of satellite sensor and band-specific top-of-atmospheric spectral radiance was established, and a stable and reliable absolute calibration coefficient of ZY3-02 MUX was determined in this campaign. We compared the calibration results of the irradiance-based method with those of the reflectance-based method. The results suggested that the irradiance-based method is better than reflectance-based method. [ABSTRACT FROM AUTHOR]