Search

The extraction of useful minerals or geological materials from the Earth's crust, most typically from various sources, is crucial to a country's development and progress. Mineral-rich countries use these resources to transform their economies and propel them toward long-term prosperity. There is an urgent need for the world to increase mineral exploration efforts, improve the recycling of important metal-containing resources, and extract them using upgraded hydrometallurgical procedures with high recovery efficiency. This review paper highlights the importance of strategic and critical metals in the economy and the role of nuclear techniques in the analysis, process optimization, and remediation of metals using solvent extraction, adsorption, and chromatographic resins. Radiotracer analysis, X-Ray Fluorescence spectrometry (XRF), Neutron Activation Analysis (NAA), and X-Ray Diffraction (XRD) are appropriate for improving laboratory-based hydrometallurgical processes, with future technical and economic benefits. The development and installation of novel instruments to provide the real-time control of mining and mineral processing plants for improved control have the potential to aid in the recovery of a broad range of metals. [ABSTRACT FROM AUTHOR]

The use of radiotracers in the present study is intended to replace traditional steps of metal quantitative analysis (solution sampling and instrumental chemical analysis) and to allow real-time measurements of metal concentrations during the leaching process. In this study, 64Cu, an isotope of copper, was selected as a radiotracer. Samples of copper flotation tailings were irradiated in the Maria research reactor (Świerk, Poland) and mixed with an inactive portion of the milled fl otation waste. The leaching process was carried out in a glass reactor, and the radiation spectrum was measured using a gamma spectrometer. The material was then treated using various acids (sulphuric acid, nitric acid, acetic acid, citric acid, and ascorbic acid) in a wide range of their concentrations. Experiments with the radiotracer were conducted in sulphuric and nitric acids. The amount of the leached metal (copper) was calculated on the basis of the peak area ratio in the gamma-ray spectrum of the activated tailings and standard samples. Inductively coupled plasma mass spectrometry (ICP-MS) was also used to analyse the metal content. Maximum recovery of 56% Cu was achieved using 9 M HNO3, whereas the recovery was lowest for ascorbic acid (<1%). Both analytical methods were compared, and the results presented in this paper are in good agreement with radiometric measurements obtained using ICP-MS analysis. [ABSTRACT FROM AUTHOR]

Scientifi c objective of this work was elaboration of radiometric method for the development of hydrometallurgical process for recovery of Cu from the copper ore. A neutron activation analysis (NAA) was identifi ed as a very convenient tool for the process investigation. The samples of copper ore were activated in a nuclear reactor. The parameters of the neutron activation were calculated. Radioisotope 64Cu was selected as an optimal tracer, and it was used for the investigation of the leaching process. During the experiments, various processes applying leaching media such as sulphuric acid, nitric acid, and organic acids were investigated. The recovery of the metals using sulphuric acid was insuffi cient, around 10%. Investigated organic media also did not meet expectations. The best results were obtained in experiments with nitric acid. Up to 90% of Cu and other metals were extracted from the copper ore. Copper concentration calculations obtained by NAA were confi rmed by inductively coupled plasma mass spectrometry (ICP-MS) technique. Both techniques gave comparable results, but the advantage of the NAA is a possibility for easy online measurements without shutting down or disturbing the system. [ABSTRACT FROM AUTHOR]