Search

Wireless local area networks based on the IEEE 802.11 standard are rapidly replacing wires within homes and offices. The latest datarate amendment to the IEEE 802.11 standard, known as the 802.11n, provides enhanced user experience by exploiting MIMO techniques that use multiple antennas for both transmitter and receiver. In conjunction with MAC layer improvements such as aggregating data, the 802.11n standard supports PHY data rates as high as 600 Mb/s with four spatial streams. This article discusses various MAC and PHY level modifications introduced in 802.11n, as well as the architecture, design trade-offs, and implementation details of a two spatial stream CMOS 802.11n-draft-compliant SoC. [ABSTRACT FROM AUTHOR]

An 802.11n-draft-compliant 2 × 2, 2-stream MIMO radio SoC, incorporating two dual-band RF transceivers, analog baseband filters, data converters, digital PHY and MAC, and a PCI Express interface, has been integrated in a standard 0.13- μm digital CMOS technology with a die area of 36 mm2 . The receiver achieves noise figures of 4 dB and 6 dB, respectively, at 2.4 GHz and 5 GHz. The transmitter EVM for a 2-stream, 40-MHz-bandwidth 64-QAM OFDM signal is - 31 dBc at 2.4 GHz and - 8 dBm output power and - 31.5 dBc at 5 GHz and - 4 dBm output power. [ABSTRACT FROM AUTHOR]

A single-chip dual-band tri-mode CMOS transceiver that implements the RF and analog front-end for an IEEE 802.11a/b/g wireless LAN is described. The chip is implemented in a 0.25-μm CMOS technology and occupies a total silicon area of 23 mm2. The IC transmits 9 dBm/8 dBm error vector magnitude (EVM)-compliant output power for a 64-QAM OFDM signal. The overall receiver noise figure is 5.5/4.5 dB at 5 GHz/2.4 GHz. The phase noise is -105 dBc/Hz at a 10-kHz offset and the spurs are below -64 dBc when measured at the 5-GHz transmitter output. [ABSTRACT FROM AUTHOR]