Search

Basal melt in the Dome A region will influence the deep-ice-core drilling at Kunlun Station. The melting point (wet bedrock) has a higher reflectivity than the surrounding area, which can be assessed using radar echoes from the bedrock. This paper uses a linear absorption model to determine wet and dry ice–bedrock interfaces around the Kunlun drilling site. In the determination process, an artificial intelligence model was applied to extract the ice–bedrock interface for inferring the ice thickness. Additionally, the various depth-averaged attenuation rates were used to identify the maximal range of basal melting. We mapped the patterns of the wet points on the bottom of the ice sheet and the modeled basal temperature to verify the results of the wet bed conditions. According to these maps of wet bed conditions, the areas with basal melting around the drilling site primarily appear in valley walls with low basal temperatures and are linked with hydraulic potential and bedrock elevation. Identifying the ice–bedrock interface is challenging in the valley bottom area, where the melting points are less than at the valley walls. Additionally, the melting proportions of 11.8% and 3.62% were calculated from two ice-penetrating radar data in this research. The mapped melting points around the site of Kunlun ice core drilling suggest complex ice flow effects and can be used to better interpret archives of old ice for paleoclimate research. [ABSTRACT FROM AUTHOR]

Understanding englacial and subglacial structures is a fundamental method of inferring ice sheets' historical evolution and surface mass balance. The internal layer continuity index and the basal roughness are key parameters and indicators for the speculation of the relationship between the ice sheet's internal structure or bottom and ice flow. Several methods have been proposed in the past two decades to quantitatively calculate the continuity index of ice layer geometry and the roughness of the ice–bedrock interface based on radar echo signals. These methods are mainly based on the average of the absolute value of the vertical gradient of the echo signal amplitude and the standard deviation of the horizontal fluctuation of the bedrock interface. However, these methods are limited by the amount and quality of unprocessed radar datasets and have not been widely used, which also hinders further research, such as the analysis of the englacial reflectivity, the subglacial conditions, and the history of the ice sheets. In this paper, based on geophysical processing methods for radar image denoising and deep learning for ice layer and bedrock interface extraction, we propose a new method for calculating the layer continuity index and basal roughness. Using this method, we demonstrate the ice-penetrating radar data processing and compare the imaging and calculation of the radar profiles from Dome A to Zhongshan Station, East Antarctica. We removed the noise from the processed radar data, extracted ice layer continuity features, and used other techniques to verify the calculation. The potential application of this method in the future is illustrated by several examples. We believe that this method can become an effective approach for future Antarctic geophysical and glaciological research and for obtaining more information about the history and dynamics of ice sheets from their radar-extracted internal structure. [ABSTRACT FROM AUTHOR]

The ice–bedrock interfaces at the bottoms of ice sheets and the internal ice layers record the historical evolution of the ice sheets and are important indicators for inferring glacier dynamics and explaining subglacial topographies. Radar-detected bedrock and internal ice layers can be used to observe conditions in the interiors and bottoms of ice sheets. The low contrast of the internal layers’ feature in radar images, as well as the effects of ice flow, makes it challenging to automatically extract and trace the layers and interfaces of ice sheets. Manual or semiautomatic methods are extensively applied in bedrock and internal ice layers’ extractions. However, the conventional methods require large amounts of time. Especially when processing a large number of radar observation data, the accuracy and efficiency of conventional methods are untoward. Therefore, we propose EisNet, a fusion system consisting of deep neural networks, to extract the multiple types of internal layers. Because of the rareness of high-precision extraction of ice layers, it is virtually impossible to train EisNet in observational data with the corresponded label of ice layers. To train EisNet, we design a novel synthetic method for radar images based on artifact noise and characteristic textures that are similar to those in the observation data. The validation in synthetic data proves EisNet’s capacity for layer extraction and noise removal. The field data application shows the generalization and adaptation abilities of EisNet and indicates that EisNet can significantly improve the efficiency of the automatic processing of ice sheet radiostratigraphy. [ABSTRACT FROM AUTHOR]

During the last few decades, bed-elevation profiles from radar sounders have been used to quantify bed roughness. Various methods have been employed, such as the 'two-parameter' technique that considers vertical and slope irregularities in topography, but they struggle to incorporate roughness at multiple spatial scales leading to a breakdown in their depiction of bed roughness where the relief is most complex. In this article, we describe a new algorithm, analogous to wavelet transformations, to quantify the bed roughness at multiple scales. The 'Self-Adaptive Two-Parameter' system calculates the roughness of a bed profile using a frequency-domain method, allowing the extraction of three characteristic factors: (1) slope, (2) skewness and (3) coefficient of variation. The multi-scale roughness is derived by weighted-summing of these frequency-related factors. We use idealized bed elevations to initially validate the algorithm, and then actual bed-elevation data are used to compare the new roughness index with other methods. We show the new technique is an effective tool for quantifying bed roughness from radar data, paving the way for improved continental-wide depictions of bed roughness and incorporation of this information into ice flow models. [ABSTRACT FROM AUTHOR]

Using frequency-modulated continuous wave radar data from the 32nd Chinese Antarctic Research Expedition in 2015/16, subsurface profiles were obtained along an East Antarctic inland traverse from Zhongshan station to Dome A, and four distinct regions were selected to analyze the spatiotemporal variability in historical surface mass balance (SMB). Based on depth, density, and age data from ice cores along the traverse, the radar data were calibrated to yield average SMB data. The zone 49–195 km from the coast has the highest SMB (235 kg m−2 a−1). The 780–892 km zone was most affected by the Medieval Warm Period and the Little Ice Age, and the SMB during ad 1454–1836 (71 kg m−2 a−1) was only one-quarter of that in the 20th century. The SMB in the 1080–1157 km zone fluctuates the most, possibly due to erosion or irregular deposition of snow by katabatic winds in low SMB areas with surface elevation fluctuations. Dome A (1157–1236 km) has the lowest SMB (29 kg m−2 a−1) and did not decrease during Little Ice Age. Understanding the spatiotemporal variability of SMB in a larger space can help us understand the complex climate history of Antarctica. [ABSTRACT FROM AUTHOR]

The ages and accumulation rates of ice are important boundary conditions for paleoclimatic ice models. Radar-detected isochronic layers can be used to date the ice column beneath the ice surface and infer past accumulation rates. A Deep Ice-Core Drilling Project has been carried out at Kunlun station in the Dome A region, East Antarctica. Radio echo sounding data are collected during the 2004/2005 Chinese National Research Expedition and the 2007/2008 Dome Connection East Antarctica project of the Alfred Wegener Institute (Germany). Radar isochronic layers from the dataset were linked to compare a new deep ice core site from Kunlun station and the Vostok ice core site. Ten visible layers, accounting for ∼50% ice thickness at the Kunlun station ice core site, were dated based on the Vostok ice core chronology. At 1,640 m depth below surface, an age of ∼160,400 yr was determined, corresponding to a bright layer at Kunlun station. These layers provided geometric information on the past surface of the ice sheet around the ice core site through the Wisconsin glacial stage, Eemian interglacial and Marine Isotope Stage 6. Based on a simple ice flow model and the age-depth relationship, we concluded that the region around the Kunlun ice core site had lower past accumulation rates, consistent with the present pattern. The age-depth relationship would thus be expected to correlate and constrain the chronology of the deep ice core at Kunlun station in the future. [ABSTRACT FROM AUTHOR]