Search

Aluminum-rich and Si-poor calcium amphibole [~3.9 Al atoms per formula unit (apfu) and ~5.5 Si apfu for 23 O] occur in the quartz-bearing eclogites from the Donghai area, Sulu ultrahigh-pressure metamorphic belt, eastern China. Most of the aluminous amphibole phases are retrograde products from the exhumation and hydration stage and are texturally divided into a mantle phase around a porphyroblastic garnet and a crack-filling (vein) phase of a garnet. Less aluminous amphibole occurs as symplectite phase with plagioclase after omphacite. The formation process of the aluminous amphibole in the quartz-bearing samples is discussed on the basis of the analytical data by EPMA, FIB-TEM, and EBSD. The mantle amphibole occurs between garnet and symplectite or quartz. A set of plagioclase and aegirinediopside/argirine-hedenbergite thin monomineralic bands forms at the boundary between the mantle amphibole and matrix quartz. However, these monomineralic bands do not occur at the mantle amphibole-symplectite boundary. These textural diferences indicate that the recrystallization of the aluminous amphibole around garnet was controlled by significant local reactions, and the size of equilibrate domains was probably several tens of micrometers or less. The mantle amphibole is composed of inner (garnet-side) and outer (matrix-side) zones. The inner zone is compositionally homogeneous, and its atomic Al/Si value is ~0.63–0.66 and similar to that of garnet. Atomic Ca/Si value in the inner zone is also almost uniform and is generally identical to that of garnet. The outer zone exhibits a monotonic decrease in the Al/Si and Ca/Si values outward, and its composition at the outermost margin is similar to that of the symplectitic amphibole. The crack-filling amphibole has a composition similar to the inner zone of the mantle amphibole. The CPO pattern of the crack-filling amphibole is diferent from that of the adjacent mantle amphibole, showing that the crack-filling amphibole is cut by the mantle amphibole. The textural relationship between the mantle and crack-filling amphibole phases and their compositional characteristics imply that: (1) the mantle type is a slightly later stage product than the crack-filling type, and (2) the boundary between the inner and outer zones of the mantle aluminous amphibole probably corresponds to the initial surface of the porphyroblastic garnet. The inner zone is considered to have grown inward by simple substitution of garnet, using the tetrahedral and octahedral cations of the garnet as the basic framework. On the other hand, most of the outer zone of the mantle-type amphibole grew outward in the matrix from the initial surface of the garnet porphyroblast. The mantle amphibole shows a CPO similar to that of amphibole in the adjacent symplectite domain, suggesting that these two types of amphibole formed almost simultaneously, sharing crystallographic orientation with each other. The formation of crack-filling aluminous amphibole was probably promoted by the hydraulic microfracturing process at an early stage of exhumation and hydration. The mantle and symplectitic amphibole phases formation was promoted by the subsequent infiltration of metamorphic fluid. The aluminous amphibole in the SiO2 phase-bearing eclogites probably recrystallized with the formation of a localized SiO2-undersaturated reaction domain because of rapid exhumation and subsequent rapid cooling of the Sulu UHP metamorphic belt. [ABSTRACT FROM AUTHOR]

Abstract: This paper presents the first report on the occurrence of eclogite from the Kumon range of the Western province in Myanmar, which is in the southeastern extension of the Himalayan orogenic belt. The eclogite is mainly composed of omphacite, garnet, hornblende/edenite/katophorite/taramite, biotite, quartz, and rutile. The garnet grains in the eclogite usually show textures of barrier reef, atoll, and table reef types, and have a wide compositional range of Alm58–70Sps1–2Prp9–16Grs14–31. Omphacite grains that occur as garnet inclusions and as isolated crystals in the matrix have similar compositions of Jd34–45 and Jd37–44, respectively. Lesser amounts of jadeitic clinopyroxene (Jd21–38), phengite, biotite, albite, and quartz occur in the lagoon of barrier reef and atoll garnet grains. The matrix omphacite is partly replaced by symplectite of sodic clinopyroxene of Jd20–29 and albite. The lower limits of the pressure/temperature during the eclogite stage, which are defined by the assemblage of garnet, omphacite (Jd40–45), and quartz, are 1.2–1.3GPa/530–615°C. The finding of eclogite from Myanmar suggests the possibility of a wide occurrence of high-pressure metamorphic rocks in the ophiolite zone along the southeastern extension of the Indus-Yarlung Zangbo suture in Myanmar and Indochina. [Copyright &y& Elsevier]

Indentation testing of natural single-crystal a-quartz parallel to the crystallographic c axis, using a triangular pyramidal diamond indenter at a maximum load of 500 mN, produced a very small residual volume of less than 1 µm³ in which α-quartz is highly stressed. Laser Raman microspectroscopy across the indentation at room temperature and pressure revealed a shift in the Raman bands, interpreted to reflect the residual stress field generated within the α-quartz. Based on the observed Raman shift, we identified a steep gradient in the residual non-hydrostatic stress field after complete unloading in quartz near the impression formed by indentation. At the center of the indentation, the maximum compressive stress and tensile stress were inferred to be higher than 2.2 and 0.1 GPa, respectively. [ABSTRACT FROM AUTHOR]

Aragonite and omphacite-bearing metapelite occurs in the albite–biotite zone of the Togu (Tohgu) area, Besshi region, Sambagawa metamorphic belt, central Shikoku, Japan. This metapelite consists of alternating graphite-rich and graphite-poor layers that contain garnet, phengite, chlorite, epidote, titanite, calcite, albite, and quartz. A graphite-poor layer contains a 1.5-cm ivory-colored lens that mainly consists of phengite, calcite, albite, and garnet. Aragonite, omphacite, and paragonite occur as inclusions in the garnet of the ivory lens. The aragonite has a composition that is close to the CaCO3 end-member: the FeCO3 and MnCO3 components are both less than 0.3 mol% and the SrCO3 component is about 1 mol%. The aragonite + omphacite + quartz assemblage in garnet indicates equilibrium conditions of P > 1.1–1.3 GPa and T = 430–550°C. Quartz grains sealed in garnet of the aragonite and omphacite-bearing sample and other metapelites in the Togu area preserve a high residual pressure that is equivalent to the Sambagawa eclogite samples. These facts suggest that: (i) the Togu area experienced eclogite facies metamorphism; and (ii) thus, eclogite facies metamorphism covered the Sambagawa belt more extensively than previously recognized. [ABSTRACT FROM AUTHOR]

Garnet grains in Sanbagawa quartz eclogites from the Besshi region, central Shikoku commonly show a zoning pattern consisting of core and mantle/rim that formed during two prograde stages of eclogite and subsequent epidote–amphibolite facies metamorphism, respectively. Garnet grains in the quartz eclogites are grouped into four types (I, II, III, and IV) according to the compositional trends of their cores. Type I garnet is most common and sometimes coexists with other types of garnet in a thin section. Type I core formed with epidote and kyanite during the prograde eclogite facies stage. The inner cores of types II and III crystallized within different whole‐rock compositions of epidote‐free and kyanite‐bearing eclogite and epidote‐ and kyanite‐free eclogite at the earlier prograde stage, respectively. The inner core of type IV probably formed during the pre‐eclogite facies stage. The inner cores of types II, III, and IV, which formed under different P–T conditions of prograde metamorphism and/or whole‐rock compositions, were juxtaposed with the core of type I, probably due to tectonic mixing of rocks at various points during the prograde eclogite facies stage. After these processes, they have shared the following same growth history: (i) successive crystal growth during the later stage of prograde eclogite facies metamorphism that formed the margin of the type I core and the outer cores of types II, III, and IV; (ii) partial resorption of the core during exhumation and hydration stage; and (iii) subsequent formation of mantle zones during prograde metamorphism of the epidote–amphibolite facies. The prograde metamorphic reactions may not have progressed under an isochemical condition in some Sanbagawa metamorphic rocks, at least at the hand specimen scale. This interpretation suggests that, in some cases, material interaction promoted by mechanical mixing and fluid‐assisted diffusive mass transfer probably influences mineral reactions and paragenesis of high‐pressure metamorphic rocks. Garnet grains in the quartz eclogites are grouped into four types (I, II, III, and IV) according to the compositional trends of their cores. Type I garnet is the most common and sometimes coexists with other types of garnet in a thin section. The coexistence of the different types of garnet is probably due to deformation‐induced lithological mixing at various points during the prograde eclogite facies stage. [ABSTRACT FROM AUTHOR]

A Laser Raman microspectrometry method was applied to metamorphic quartz in quartz-eclogite-, epidote-amphibolite-, and amphibolite-facies rocks to assess the quantitative correlation between the Raman frequency shift and metamorphic pressure. Quartz crystals sealed in garnet and other phases have a higher frequency shift than those in the matrix. Furthermore, the quartz inclusions show a frequency shift specific to the individual host crystals in eclogites (garnet ≈ kyanite > omphacite ≈ epidote). These observations imply that the residual pressures retained by quartz inclusions depend on elastic parameters of the host crystals, as discussed by previous researchers. The Raman frequency shift of quartz inclusions in garnet systematically increases with increasing peak metamorphic pressures from the amphibolite facies (0.30.0.55 GPa/470-570 °C), through the epidote-amphibolite facies (0.8.1.1 GPa/470.635 °C) to the quartz-eclogite facies (2.1.2.5 GPa/660-710 °C). Calibrations based on experimental work suggest that the measured Raman frequency shifts signify residual pressures of 0.1.0.2, 0.4.0.6, and 0.8.1.0 GPa for these three groups of metamorphic rocks, respectively. Normal stresses (internal pressures) of quartz inclusions in garnet, numerically simulated with an elastic model, and inferred pressure-temperature conditions at peak metamorphic stage are compatible with the residual pressures estimated from the frequency shifts. Laser Raman microspectroscopic analysis of quartz is a simple and effective method for (1) comparison of pressure conditions in metamorphic rocks formed under various pressure-temperature conditions, and (2) detection of a higher-pressure signature in metamorphic rocks extensively recrystallized during the subsequent exhumation and hydration stage. [ABSTRACT FROM AUTHOR]