Search

Anticancer theranostic nanocarriers have the potential to enhance the efficacy of pharmaceutical evaluation of drugs. Semiconductor nanocrystals, also known as quantum dots (QDs), are particularly promising components of drug carrier systems due to their small sizes and robust photoluminescence properties. Herein, bright CdZnSeS quantum dots were synthesized in a single step via the hot injection method. The particles have a quasi-core/shell structure as evident from the high quantum yield (85 %), which decreased to 41 % after water solubilization. These water solubilized QDs were encapsulated into gallic acid / alginate (GA-Alg) matrices to fabricate imaging QDs@mod-PAA/GA-Alg particles with enhanced stability in aqueous media. Cell viability assessments demonstrated that these nanocarriers exhibited viability ranging from 63 % to 83 % across all tested cell lines. Furthermore, the QDs@mod-PAA/GA-Alg particles were loaded with betulinic acid (BA) and ceranib-2 (C2) for in vitro drug release studies against HL-60 leukemia and PC-3 prostate cancer cells. The BA loaded QDs@mod-PAA/GA-Alg had a half-maximal inhibitory concentration (IC 50 ) of 8.76 μg/mL against HL-60 leukemia cells, which is 3-fold lower than that of free BA (IC 50  = 26.55 μg/mL). Similar enhancements were observed with nanocarriers loaded with C2 and simultaneously with both BA and C2. Additionally, BA:C2 loaded QDs@mod-PAA/GA-Alg nanocarriers displayed a similar enhancement (IC50 = 3.37 μg/mL compared against IC50 = 11.68 μg/mL for free BA:C2). The C2 loaded QDs@mod-PAA/GA-Alg nanocarriers had an IC50 = 2.24 μg/mL against HL-60 cells. C2 and BA loaded QDs@mod-PAA/GA-Alg NCr had IC50 values of 7.37 μg/mL and 24.55 μg/mL against PC-3 cells, respectively., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 The Authors. Published by Elsevier Inc. All rights reserved.)

Quantum dot (QD)-organic dye couple chromophores are topical due to their applications in biology, catalysis, and energy. The maximization of energy transfer efficiency can be guided by the underlying Förster or Dexter mechanisms; however, the impact of fluorescence intermittency must also be considered. Here we demonstrate that the average ⟨ t on ⟩ and ⟨ t off ⟩ times of dye acceptors in coupled QD-dye chromophores are substantially affected by the donors' blinking behavior. With regard to biological imaging, this effect beneficially minimizes the photobleaching of the acceptor dye. The implications for alternative energy are less encouraging as the acceptors' capacity to store energy, using ⟨ t on ⟩/⟨ t off ⟩ as a metric, was reduced by as much as ∼95%. These detrimental effects can be mitigated by suppressing QD blinking via surface treatment. This study also demonstrates several instances of the nonconformity of QD blinking dynamics to a power law distribution, as a robust examination of the off times reveals log-normal behavior that is consistent with the Albery model.

Materials for studying biological interactions and for alternative energy applications are continuously under development. Semiconductor quantum dots are a major part of this landscape due to their tunable optoelectronic properties. Size-dependent quantum confinement effects have been utilized to create materials with tunable bandgaps and Auger recombination rates. Other mechanisms of electronic structural control are under investigation as not all of a material's characteristics are affected by quantum confinement. Demonstrated here is a new structure-property concept that imparts the ability to spatially localize electrons or holes within a core/shell heterostructure by tuning the charge carrier's kinetic energy on a parabolic potential energy surface. This charge carrier separation results in extended radiative lifetimes and in continuous emission at the single-nanoparticle level. These properties enable new applications for optics, facilitate novel approaches such as time-gated single-particle imaging, and create inroads for the development of other new advanced materials.

Dendritic cells (DCs) can infiltrate tight junctions of the epithelium to collect remote antigens during immune surveillance. While elongated membrane structures represent a plausible structure to perform this task, their functional mechanisms remain elusive owing to the lack of high-resolution characterizations in live DCs. Here, we developed fluorescent artificial antigens (FAAs) based on quantum dots coated with polyacrylic acid. Single-particle tracking of FAAs enables us to superresolve the membrane fiber network responsible for the antigen uptake. Using the DC2.4 cell line as a model system, we discovered the extensive membrane network approaching 200 μm in length with tunnel-like cavities about 150 nm in width. The membrane fiber network also contained heterogeneous circular migrasomes. Disconnecting the membrane network from the cell body decreased the intracellular FAA density. Our study enables mechanistic investigations of DC membrane networks and nanocarriers that target this mechanism.

We report single-particle characterization of membrane-penetrating semiconductor quantum dots (QDs) in T cell lymphocytes. We functionalized water-soluble CdSe/CdZnS QDs with a cell-penetrating peptide composed of an Asp-Ser-Ser (DSS) repeat sequence. DSS and peptide-free control QDs displayed concentration-dependent internalization. Intensity profiles from single-particle imaging revealed a propensity of DSS-QDs to maintain a monomeric state in the T cell cytosol, whereas control QDs formed pronounced clusters. Single-particle tracking showed a direct correlation between individual QD clusters' mobility and aggregation state. A significant portion of control QDs colocalized with an endosome marker inside the T cells, while the percentage of DSS-QDs colocalized dropped to 9%. Endocytosis inhibition abrogated the internalization of control QDs, while DSS-QD internalization only mildly decreased, suggesting an alternative cell-entry mechanism. Using 3D single-particle tracking, we captured the rapid membrane-penetrating activity of a DSS-QD. The ability to characterize membrane penetrating activities in live T cells creates inroads for the optimization of gene therapy and drug delivery through the use of novel nanomaterials.

The risks of environmental exposures of quantum dot (QD) nanoparticles are increasing, but these risks are difficult to assess because fundamental questions remain about factors affecting the mobility of QDs. The objective of this study is to help address this shortcoming by evaluating the physico-chemical mechanisms controlling the transport and retention of CdSe/ZnS QDs under various environmental conditions. The approach was to run a series of laboratory-scale column experiments where QDs were transported through saturated porous media with different pH values and concentrations of citrate and Suwannee River natural organic matter (SRNOM). Numerical simulations were then conducted and compared with the laboratory data in order to evaluate parameters controlling transport. QD suspensions were injected into the column in an upward direction and ICP-MS used to analyze Cd 2+ concentrations (C) in column effluent and sand porous media samples. The increase in the background solution pH values enhanced the QD transport and decreased the QD retention. QD transport recovery percentages obtained from the column effluent samples were 2.6%, 83.2%, 101.7%, 96.5%, and 98.9%, at pH levels of 1.5, 3.5, 5, 7, and 9, respectively. The effects of citrate and SRNOM on the transport and retention of QDs were pH dependent as reflected in the influence of the electrostatic and steric interactions between QDs and sand surfaces. QDs were mobile under unfavorable deposition conditions at environmentally relevant pHs (i.e., 5, 7, and 9). Under favorable pH conditions for deposition (i.e., 1.5), QDs were completely retained within the porous media. The retention profiles of QDs showed a non-exponential decay with distance to the inlet, attributed to multiple deposition rates caused by the QD particles and surface heterogeneities of the quartz silica sand. Results of the diameter ratios of QDs to the median sand grains, in suspensions of DI water at pH 1.5, of citrate at pH 1.5, and of citrate at pH 3.5 indicate straining as the dominating mechanism for QD retention in porous media. The blocking effect and straining were significant under favorable deposition conditions and the detachment effect was non-negligible under unfavorable deposition conditions. Physico-chemical attachment and straining are the governing mechanisms that control the retention of QDs. Overall, experimental results indicate that aggregation, deposition, straining, blocking, and DLVO-type interactions affect the advective transport and retention of QDs in saturated porous media. The simulations were conducted using models that include terms describing attachment, detachment, and straining terms-model 1: M1-attachment, model 2: M2-attachment and detachment, model 3: M3-straining, and model 4: M4-attachment, detachment, and straining. The results from simulations with M2-attachment and detachment and M4-attachment, detachment, and straining matched best the observed breakthrough curves, but all four models inadequately described the retention profiles. Our findings demonstrate that QDs are mobile in porous media under a wide range of physico-chemical conditions representative of the natural environment. The mobility behavior of QDs in porous media indicated the potential risk of soil and groundwater contamination.

Semiconductor nanocrystals, or quantum dots (QDs), are candidates for biological sensing, photovoltaics, and catalysis due to their unique photophysical properties. The most studied QDs are composed of heavy metals like cadmium and lead. However, this engenders concerns over heavy metal toxicity. To address this issue, numerous studies have explored the development of nontoxic (or more accurately less toxic) quantum dots. In this Review, we select three major classes of nontoxic quantum dots composed of carbon, silicon and Group I-III-VI elements and discuss the myriad of synthetic strategies and surface modification methods to synthesize quantum dots composed of these material systems., (© 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

A one-step method to produce ≈12 nm hydrodynamic diameter water-soluble CdSe/ZnS quantum dots (QDs), as well as CdS/ZnS, ZnSe/ZnMnS/ZnS, AgInS2 /ZnS, and CuInS2 /ZnS QDs, by ligand exchange with a near-monolayer of organosilane caps is reported. The method cross-links the surface-bound silane ligands such that the samples are stable on the order of months under ambient conditions. Furthermore, the samples may retain a high quantum yield (60%) over this time. Several methods to functionalize aqueous QD dispersions with proteins and fluorescent dyes have been developed with reaction yields as high as 97%., (© 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

The unique optoelectronic properties of quantum dots (QDs) give them significant advantages over traditional organic dyes, not only as fluorescent labels for bioimaging, but also as emissive sensing probes. QD sensors that function via manipulation of fluorescent resonance energy transfer (FRET) are of special interest due to the multiple response mechanisms that may be utilized, which in turn imparts enhanced flexibility in their design. They may also function as ratiometric, or "color-changing" probes. In this review, we describe the fundamentals of FRET and provide examples of QD-FRET sensors as grouped by their response mechanisms such as link cleavage and structural rearrangement. An overview of early works, recent advances, and various models of QD-FRET sensors for the measurement of pH and oxygen, as well as the presence of metal ions and proteins such as enzymes, are also provided.

We have created a platform for the ratiometric fluorescent sensing of targeted proteins by conjugating conjoined protein binding agent/organic dye ligands to water-soluble, emissive semiconductor quantum dots (QDs). The QD emission is tuned such that it may serve as an energy transfer donor to the dye acceptor. Upon exposure to the target proteins, these analytes bind to the surfaces of the QDs and change the microenvironments of the QD-bound dyes such that the emissive properties of the dyes are perturbed. The resulting alteration in the QD and dye fluorescence spectra creates a readout that is fully quantitative. The advantage of our methodology is that the detection of proteins is very fast as the platform is fully homogeneous, whereas the heterogeneous ELISA assay involves multiple steps with blocking agents and secondary reporters that ultimately complicate the process. The calculated detection limits for the two QD protein-sensing examples reported here are also competitive with the ubiquitous ELISA assay.

We report here a method for synthesizing CdSe quantum dots (QDs) containing copper such that each QD is doped with four copper ions. The synthesis is a derivative of the cluster-seed method, whereby organometallic clusters act as nucleation centers for quantum dots. The method is tolerant of the chemical identity of the seed; as such, we have doped four copper ions into CdSe QDs using [Na(H2O)3]2[Cu4(SPh)6] as a cluster seed. The controlled doping allows us to monitor the photophysical properties of guest ions with X-ray spectroscopy, specifically XANES and EXAFS at the copper K-edge. These data reveal that copper can capture both electrons and holes from photoexcited CdSe QDs. When the dopant is oxidized, photoluminescence is quenched and the copper ions translocate within the CdSe matrix, which slows the return to an emissive state.

Semiconductor quantum dots (QDs) are highly fluorescent nanocrystals that have abundant potential for uses in biological imaging and sensing. However, the best materials are synthesized in hydrophobic surfactants that prevent direct aqueous solubilization. While several methods have been developed to impart water-solubility, an aqueous QD dispersion has no inherent useful purpose and must be functionalized further. Due to the colloidal nature of QD dispersions, traditional methods of chemical conjugation in water either have low yields or cause irreversible precipitation of the sample. Here, we describe several methods to water-solubilize QDs and further functionalize the materials with chemical and/or biological vectors.

We have developed a strategy for the ratiometric detection of toxic Hg(2+) ions using a semiconductor nanocrystal energy-transfer donor coupled to a mercury-sensitive "turn-on" dye acceptor. The results demonstrate a new paradigm of toxic metal sensing that resolves the difficulties with the use of semiconductor nanotechnology for this purpose.

To investigate the coupled effects of solution chemistry and hydrodynamics on the mobility of quantum dot (QD) nanoparticles in the vadose zone, laboratory scale transport experiments involving single and/or sequential infiltrations of QDs in unsaturated and saturated porous media, and computations of total interaction and capillary potential energies were performed. As ionic strength increased, QD retention in the unsaturated porous media increased; however, this retention was significantly suppressed in the presence of a non-ionic surfactant in the infiltration suspensions as indicated by surfactant enhanced transport of QDs. In the vadose zone, the non-ionic surfactant limited the formation of QD aggregates, enhanced QD mobility and transport, and lowered the solution surface tension, which resulted in a decrease in capillary forces that not only led to a reduction in the removal of QDs, but also impacted the vadose zone flow processes. When chemical transport conditions were favorable (ionic strength of 5 × 10(-4)M and 5 × 10(-3)M, or ionic strengths of 5 × 10(-2)M and 0.5M with surfactant), the dominating phenomena controlling the mobility and transport of QDs in the vadose zone were meso-scale processes, where infiltration by preferential flow results in the rapid transport of QDs. When chemical transport conditions were unfavorable (ionic strength of 5 × 10(-2)M and 0.5M) the dominating phenomena controlling the mobility and transport of QDs in the vadose zone were pore-scale processes governed by gas-water interfaces (GWI) that impact the mobility of QDs. The addition of surfactant enhanced the transport of QDs both in favorable and unfavorable chemical transport conditions. The mobility and retention of QDs was controlled by interaction and capillary forces, with the latter being the most influential. GWI were found to be the dominant mechanism and site for QD removal compared with solid-water interfaces (SWI) and pore straining. Additionally, ripening phenomena were demonstrated to enhance QDs removal or retention in porous media and to be attenuated by the presence of surfactant., (Copyright © 2010 Elsevier B.V. All rights reserved.)

The impact of unintentional incorporation of Sb in the tensile InAs layer of type-II strain-balanced InAs/InAsSb superlattices is investigated. Several coherently strained midwave and longwave superlattices are grown on (100) GaSb substrates by molecular beam epitaxy and examined using x-ray diffraction and temperature-dependent photoluminescence spectroscopy. The zero-order diffraction angle provides the average Sb mole fraction of the strain-balanced superlattice period. Analysis of the higher order diffraction angles, along with the individual layer growth times and strain, provides the InAs and InAsSb layer thicknesses. Analysis of the photoluminescence measurements provides the ground-state bandgap of the superlattice, which along with simulations of the ground-state energies of the electrons and holes using a Kronig–Penney model, specify how the Sb is distributed between the tensile and compressive layers of the period and ultimately the quantity of unintentional Sb in the InAs layer. The unintentional Sb mole fractions observed in the tensile InAs layers are 1.9% for midwave and 1.2% for longwave. When compared to superlattices with the same period and no Sb in the tensile layer, the presence of unintentional Sb blue-shifts the 77 K temperature cutoff wavelength from 6.3 to 5.3 μm for midwave and from 18.8 to 12.0 μm for longwave. [ABSTRACT FROM AUTHOR]

A microscopy platform that leverages the arrival time of individual photons to enable 3D single-particle tracking of fast-moving (translational diffusion coefficient of ≃3.3 µm2/s) particles in high-background environments is reported here. It combines a hardware-based time-gating module, which enables the rate of photon processing to be as high as 100 MHz, with a two-photon-excited 3D single-particle tracking confocal microscope to enable high sample penetration depth. Proof-of-principle experiments where single quantum dots are tracked in solutions containing dye-stained cellulose, are shown with tracking performance markedly improved using the hardware-based time-gating module. Such a microscope design is anticipated to be of use to a variety of communities who wish to track single particles in cellular environments, which commonly have high fluorescence and scattering background. [ABSTRACT FROM AUTHOR]

Lead selenide quantum dots (QDs) are low-bandgap IV-VI semiconducting nanomaterials that have been studied for a variety of applications. Their preparation using colloidal methods can create small spherical to larger cubic nanocrystals, with an upper limit of ~17 nm reported to date. Here we describe methods for preparing cubic PbSe nanocrystals over a 20–40 nm size range using a twostep procedure. Specifically, ~10 nm PbSe QDs are generated using the rapid injection method, the products from which are overcoated with additional lead and selenium precursors. The use of two lead reagents were studied; lead oleate resulted in a maximum of 20 nm cubes, while more reactive lead hexyldecanoate resulted in much larger nanomaterials with bulk bandgaps. However, PbSe samples prepared with lead hexyldecanoate also contained agglomerates. Special care must be taken when characterizing larger strained nanomaterials with X-ray powder diffraction, for which the Scherrer equation is inadequate. A more rigorous approach using the Williamson–Hall method provides characterizations that are consistent with electron microscopy analysis.

Knowledge of the fate and transport of nanoparticles in the subsurface environment is limited, as techniques to monitor and visualize the transport and distribution of nanoparticles in porous media and measure their in situ concentrations are lacking. To address these issues, we have developed a light transmission and fluorescence method to visualize and measure in situ concentrations of quantum dot (QD) nanoparticles in variably saturated environments. Calibration cells filled with sand as porous medium and various known water saturation levels and QD concentrations were prepared. By measuring the intensity of the light transmitted through porous media exposed to fluorescent light and by measuring the hue of the light emitted by the QDs under UV light exposure, we obtained simultaneously in situ measurements of water saturation and QD nanoparticle concentrations with high spatial and temporal resolutions. Water saturation was directly proportional to the light intensity. A linear relationship was observed between hue-intensity ratio values and QD concentrations for constant water saturation levels. The advantages and limitations of the light transmission and fluorescence method as well as its implications for visualizing and measuring in situ concentrations of QDs nanoparticles in the subsurface environment are discussed. [ABSTRACT FROM AUTHOR]

We report a platform for the ratiometric fluorescent sensing of endogenously generated gaseous transmitter H2S in its aqueous form (bisulfide or hydrogen sulfide anion) based on the alteration of Forster resonance energy transfer from an emissive semiconductor quantum dot (QD) donor to a dithiol-linked organic dye acceptor. The disulfide bridge between the two chromophores is cleaved upon exposure to bisulfide, resulting in termination of FRET as the dye diffuses away from the QD. This results in enhanced QD emission and dye quenching. The resulting ratiometric response can be correlated quantitatively to the concentration of bisulfide and was found to have a detection limit as low as 1.36 ± 0.03 µM. The potential for use in biological applications was demonstrated by measuring the response of the QD-based FRET sensor microinjected into live HeLa cells upon extracellular exposure to bisulfide. The methodology used here is built upon a highly multifunctional platform that offers numerous advantages, such as low detection limit, enhanced photochemical stability, and sensing ability within a biological milieu. [ABSTRACT FROM AUTHOR]

It is a paradigm that the excitonsplitting characteristics oftype II quantum dots (QDs) result in low quantum yield materials.However, reported herein is the synthesis of ZnSe/CdS/ZnS type IIQDs with quantum yields as high as 61%. Most interesting is the factthat the enhancement in brightness is due to an increase in the radiativerate, rather than the suppression of surface trap-related nonradiativeprocesses, which was found to be minimal. These QDs have been water-solubilizedusing two different methods and retain a substantial fraction of theirbrightness. The water-soluble type II QDs were conjugated to a dyeto examine their potential as fluorescence resonance energy transfer(FRET) donors. A significant FRET efficiency of 61 ± 3% was measuredusing time-correlated single photon counting, which demonstrates thepotential for these materials to be used in FRET-based chemical andbiological sensing applications. [ABSTRACT FROM AUTHOR]