Search

Single-atom catalysts (SACs) have attracted extensive attention in the field of catalysis due to their excellent catalytic ability and enhanced atomic utilization, but the multi-mode single-atom nanozymes for biosensors remain a challenging issue. In this work, iron-doped carbon dots (Fe CDs) were loaded onto the edges and pores of Mo SACs with nanoflower morphology; accordingly, a composite material Fe CDs/Mo SACs was prepared successfully, which improves the catalytic performance and develops a fluorescence mode without changing the original morphology. The steady-state kinetic data indicates that the material prepared have better affinity for substrates and faster reaction rates under optimized conditions. The specific kinetic parameters K m and V max were calculated as 0.39 mM and 7.502×10 -7 M·s -1 respectively. The excellent peroxidase-like activity of Fe CDs/Mo SACs allows H 2 O 2 to decompose into •OH, which in turn oxidizes colorless o-phenylenediamine (OPD) to yellow 2,3-diaminophenazine (DAP). At the same time, the fluorescence signal of Fe CDs/Mo SACs quenches obviously by DAP at 460 nm through internal filtration effect (IFE), while the characteristic fluorescence response of DAP gradually increases at 590 nm. Based on this sensing mechanism, a sensitive and accurate dual-mode (colorimetric and ratiometric fluorescent) sensor was constructed to detect H 2 O 2 and uric acid, and the rate of recovery and linearity were acceptable for the detection of UA in human serum and urine samples. This method provides a new strategy for rapid and sensitive detection of UA, and also broadens the development of SACs in the field of biosensors., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Inc. All rights reserved.)

Quantum dot (QD) sensitized molecular triplet excited state generation has been a promising alternative for traditional triplet state harvesting schemes. However, the correlation between QD bright/dark states and QD sensitized triplet energy transfer (TET) has been unclear. Herein, we studied the bright/dark states contribution to TET with CdSe/CdS core/shell QD-oligothiophene as the model system. Equilibrium between QD bright and dark states was tuned by changing temperature, and TET dynamics were monitored with transient absorption spectroscopy. Analysis of acceptor triplet excited state growth kinetics yields rates of TET from bright and dark states as 0.492 ± 0.011 ns -1 and 0.0271 ± 0.0014 ns -1 at 5 K, suggesting significant contribution of bright states to TET. The result was rationalized by bright state wave function components with the same electron/hole spin projections leading to nonzero TET probability. The study provides new insights into QD sensitized TET mechanisms and inspiration for future TET efficiency optimization through QD exciton engineering.

Interaction of surface adsorbate vibration and intraband electron absorption in nanocrystals has been reported to affect the photophysical properties of both nanocrystals and surface adsorbates and may affect the performance of hybrid photocatalysts composed of semiconductor nanocrystals and molecular catalysts. Here, by combining ultrafast transient visible and IR spectroscopic measurements, we report the observation of Fano resonances between the intraband transition of the photogenerated electrons in CdS and CdSe nanocrystals and CO stretching vibrational modes of adsorbed molecular catalysts, [Fe 2 (cbdt)(CO) 6 ] (FeFe; cbdt = 1-carboxyl-benzene-2,3-dithiolate), a molecular mimic for the active site of FeFe-hydrogenase. The occurrence of Fano resonances is independent of nanocrystal types (rods vs dots) or charge transfer character between the nanocrystal and FeFe, and is likely a general feature of nanocrystal and molecular catalyst hybrid systems. These results provide new insights into the fundamental interactions in these hybrid assemblies for artificial photosynthesis.

Photon upconversion employing semiconductor nanocrystals (NCs) makes use of their large and tunable absorption to harvest light in the near-infrared (NIR) wavelengths as well as their small gap between singlet and triplet excited states to reduce energy losses. Here, we report the highest QY (11.8%) thus far for the conversion of NIR to yellow photons by improving the quality of the PbS NC. This high QY was achieved by using highly purified lead and thiourea precursors. This QY is 2.6 times higher than from NCs prepared with commercially available lead and sulfide precursors. Transient absorption spectroscopy reveals two reasons for the enhanced QY: longer intrinsic exciton lifetimes of PbS NCs and the ability to support a longer triplet lifetime for the surface-bound transmitter molecule. Overall, this results in a higher efficiency of triplet exciton transfer from the PbS NC light absorber to the emitter and thus a higher photon upconversion QY.

Quantum dots (QDs) offer distinct advantages over organic dyes and fluorescent proteins for biological imaging applications because of their brightness, photostability, and tunability. However, a major limitation is that single QDs emit fluorescent light in an intermittent on-and-off fashion called "blinking". Here we report the development of blinking-suppressed, relatively compact QDs that are able to maintain their favorable optical properties in aqueous solution. Specifically, we show that a linearly graded alloy shell can be grown on a small CdSe core via a precisely controlled layer-by-layer process, and that this graded shell leads to a dramatic suppression of QD blinking in both organic solvents and water. A substantial portion (>25%) of the resulting QDs does not blink (more than 99% of the time in the bright or "on" state). Theoretical modeling studies indicate that this type of linearly graded shell not only can minimize charge carrier access to surface traps but also can reduce lattice defects, both of which are believed to be responsible for carrier trapping and QD blinking. Further, we have evaluated the biological utility of blinking-suppressed QDs coated with polyethylene glycol (PEG)-based ligands and multidentate ligands. The results demonstrate that their optical properties are largely independent of surface coatings and solvating media, and that the blinking-suppressed QDs can provide continuous trajectories in live-cell receptor tracking studies.

Using single CdSe/CdS quantum dot (QD) functionalized atomic force microscopy (AFM) tips, we demonstrate that the spatial dependence of photoinduced electron transfer dynamics from the single QD to TiO2 nanoparticles can be controlled and probed with high spatial (subdiffraction-limited) and temporal (limited by fluorescence microscopy) resolutions. This finding suggests the feasibility of using electron donor or acceptor modified AFM tips for simultaneous high resolution imaging of morphology and photoinduced charge transfer dynamics in nanomaterials.

Hot carrier and multiple exciton extractions from lead salt quantum dots (QDs) to TiO(2) single crystals have been reported. Implementing these ideas on practical solar cells likely requires the use of nanocrystalline TiO(2) thin films to enhance the light harvesting efficiency. Here, we report 6.4 ± 0.4 fs electron transfer time from PbS QDs to TiO(2) nanocrystalline thin films, suggesting the possibility of extracting hot carriers and multiple excitons in solar cells based on these materials., (© 2011 American Chemical Society)

The size dependence of optical and electronic properties of semiconductor quantum dots (QDs) have been extensively studied in various applications ranging from solar energy conversion to biological imaging. Core/shell QDs allow further tuning of these properties by controlling the spatial distributions of the conduction-band electron and valence-band hole wave functions through the choice of the core/shell materials and their size/thickness. It is possible to engineer type II core/shell QDs, such as CdTe/CdSe, in which the lowest energy conduction-band electron is largely localized in the shell while the lowest energy valence-band hole is localized in the core. This spatial distribution enables ultrafast electron transfer to the surface-adsorbed electron acceptors due to enhanced electron density on the shell materials, while simultaneously retarding the charge recombination process because the shell acts as a tunneling barrier for the core localized hole. Using ultrafast transient absorption spectroscopy, we show that in CdTe/CdSe-anthraquinone (AQ) complexes, after the initial ultrafast (~770 fs) intra-QD electron transfer from the CdTe core to the CdSe shell, the shell-localized electron is transferred to the adsorbed AQ with a half-life of 2.7 ps. The subsequent charge recombination from the reduced acceptor, AQ(-), to the hole in the CdTe core has a half-life of 92 ns. Compared to CdSe-AQ complexes, the type II band alignment in CdTe/CdSe QDs maintains similar ultrafast charge separation while retarding the charge recombination by 100-fold. This unique ultrafast charge separation and slow recombination property, coupled with longer single and multiple exciton lifetimes in type II QDs, suggests that they are ideal light-harvesting materials for solar energy conversion.

Functional quantum dot (QD)-based nanostructures are often constructed through the self-assembly of QDs with binding partners (molecules or other nanoparticles), a process that leads to a statistical distribution of the number of binding partners. Using single QD fluorescence spectroscopy, we probe this distribution and its effect on the function (electron-transfer dynamics) in QD-C60 complexes. Ensemble-averaged transient absorption and fluorescence decay as well as single QD fluorescence decay measurements show that the QD exciton emission was quenched by electron transfer from the QD to C60 molecules and the electron-transfer rate increases with the C60-to-QD ratio. The electron-transfer rate of single QD-C60 complexes fluctuates with time and varies among different QDs. The standard deviation increases linearly with the average of electron-transfer rates of single QD-C60 complexes, and the distributions of both quantities obey Poisson statistics. The observed distributions of single QD-C60 complexes and ensemble-averaged fluorescence decay kinetics can be described by a model that assumes a Poisson distribution of the number of adsorbed C60 molecules per QD. Our findings suggest that, in self-assembled QD nanostructures, the statistical distribution of the number of adsorbed partners can dominate the distributions of the averages and standard deviation of their interfacial dynamical properties.

Type I core/shell quantum dots (QDs) have been shown to improve the stability and conversion efficiency of QD-sensitized solar cells compared to core only QDs. To understand how the shell thickness affects the solar cell performance, its effects on interfacial charge separation and recombination kinetics are investigated. These kinetics are measured in CdSe/ZnS type I core/shell QDs adsorbed with anthroquinone molecules (as electron acceptor) by time-resolved transient absorption spectroscopy. We show that the charge separation and recombination rates decrease exponentially with the shell thickness (d), k(d) = k(0)e(-βd), with exponential decay factors β of 0.35 ± 0.03 per Å and 0.91 ± 0.14 per Å, respectively. Model calculations show that these trends can be attributed to the exponential decrease of the 1S electron and hole densities at the QD surface with the shell thickness. The much steeper decrease in charge recombination rate results from a larger hole effective mass (than electron) in the ZnS shell. This finding suggests possible ways of optimizing the charge separation yield and lifetime by controlling the thickness and nature of the shell materials.

Multiexciton generation in quantum dots (QDs) may provide a new approach for improving the solar-to-electric power conversion efficiency in QD-based solar cells. However, it remains unclear how to extract these excitons before the ultrafast exciton-exciton annihilation process. In this study we investigate multiexciton dissociation dynamics in CdSe QDs adsorbed with methylene blue (MB(+)) molecules by transient absorption spectroscopy. We show that excitons in QDs dissociate by ultrafast electron transfer to MB(+) with an average time constant of approximately 2 ps. The charge separated state is long-lived (>1 ns), and the charge recombination rate increases with the number of dissociated excitons. Up to three MB(+) molecules per QD can be reduced by exciton dissociation. Our result demonstrates that ultrafast interfacial charge separation can effectively compete with exciton-exciton annihilation, providing a viable approach for utilizing short-lived multiple excitons in QDs.