Search

New models for ACE2 receptor binding, based on QSAR and docking algorithms were developed, using XRD structural data and ChEMBL 26 database hits as training sets. The selectivity of the potential ACE2-binding ligands towards Neprilysin (NEP) and ACE was evaluated. The Enamine screening collection (3.2 million compounds) was virtually screened according to the above models, in order to find possible ACE2-chemical probes, useful for the study of SARS-CoV2-induced neurological disorders. An enzymology inhibition assay for ACE2 was optimized, and the combined diversified set of predicted selective ACE2-binding molecules from QSAR modeling, docking, and ultrafast docking was screened in vitro. The in vitro hits included two novel chemotypes suitable for further optimization. [ABSTRACT FROM AUTHOR]

We report new consensus models estimating acute toxicity for algae, Daphnia and fish endpoints. We assembled a large collection of 3680 public unique compounds annotated by, at least, one experimental value for the given endpoint. Support Vector Machine models were internally and externally validated following the OECD principles. Reasonable predictive performances were achieved (RMSEext = 0.56–0.78) which are in line with those of state-of-the-art models. The known structural alerts are compared with analysis of the atomic contributions to these models obtained using the ISIDA/ColorAtom utility. A benchmarking against existing tools has been carried out on a set of compounds considered more representative and relevant for the chemical space of the current chemical industry. Our model scored one of the best accuracy and data coverage. Nevertheless, industrial data performances were noticeably lower than those on public data, indicating that existing models fail to meet the industrial needs. Thus, final models were updated with the inclusion of new industrial compounds, extending the applicability domain and relevance for application in an industrial context. Generated models and collected public data are made freely available. [ABSTRACT FROM AUTHOR]

Generative topographic mapping (GTM) has been used to visualize and analyze the chemical space of antimalarial compounds as well as to build predictive models linking structure of molecules with their antimalarial activity. For this, a database, including ~3000 molecules tested in one or several of 17 anti- Plasmodium activity assessment protocols, has been compiled by assembling experimental data from in-house and ChEMBL databases. GTM classification models built on subsets corresponding to individual bioassays perform similarly to the earlier reported SVM models. Zones preferentially populated by active and inactive molecules, respectively, clearly emerge in the class landscapes supported by the GTM model. Their analysis resulted in identification of privileged structural motifs of potential antimalarial compounds. Projection of marketed antimalarial drugs on this map allowed us to delineate several areas in the chemical space corresponding to different mechanisms of antimalarial activity. This helped us to make a suggestion about the mode of action of the molecules populating these zones. [ABSTRACT FROM AUTHOR]

In this work, we report QSPR modeling of the free energy Δ G of 1 : 1 hydrogen bond complexes of different H-bond acceptors and donors. The modeling was performed on a large and structurally diverse set of 3373 complexes featuring a single hydrogen bond, for which Δ G was measured at 298 K in CCl4. The models were prepared using Support Vector Machine and Multiple Linear Regression, with ISIDA fragment descriptors. The marked atoms strategy was applied at fragmentation stage, in order to capture the location of H-bond donor and acceptor centers. Different strategies of model validation have been suggested, including the targeted omission of individual H-bond acceptors and donors from the training set, in order to check whether the predictive ability of the model is not limited to the interpolation of H-bond strength between two already encountered partners. Successfully cross-validating individual models were combined into a consensus model, and challenged to predict external test sets of 629 and 12 complexes, in which donor and acceptor formed single and cooperative H-bonds, respectively. In all cases, SVM models outperform MLR. The SVM consensus model performs well both in 3-fold cross-validation ( RMSE=1.50 kJ/mol), and on the external test sets containing complexes with single ( RMSE=3.20 kJ/mol) and cooperative H-bonds ( RMSE=1.63 kJ/mol). [ABSTRACT FROM AUTHOR]

Exhaustive quantitative structure-property relationship (QSPR) modeling of the separation factor logSF for 46 polyazaheterocyclic ligands extracting Am3+ and Eu3+ from nitric acid aqueous solution to the 1,1,2,2–tetrachloroethane phase has been done using different computational approaches. Modeling methods included Multiple Linear Regression, Radial Basis Function Neural Networks, and Associated Neural Networks; two types of descriptors (substructural molecular fragments and molecular descriptors) and different techniques of variable selection have been employed. The developed QSPR models applied for novel t-Bu-hemi-BTP ligand resulted in logSF=1.07-1.46; these predicted values somewhat exceed the experimental value logSF=1.0. Several hypothetical extractants potentially possessing high logSF values are proposed. An influence of uncertainties in initial experimental data as well as the choice of the theoretical approach on the performance of QSPR models is discussed. [ABSTRACT FROM AUTHOR]

In this paper we demonstrate that Generative Topographic Mapping (GTM), a machine learning method traditionally used for data visualisation, can be efficiently applied to QSAR modelling using probability distribution functions (PDF) computed in the latent 2-dimensional space. Several different scenarios of the activity assessment were considered: (i) the 'activity landscape' approach based on direct use of PDF, (ii) QSAR models involving GTM-generated on descriptors derived from PDF, and, (iii) the k-Nearest Neighbours approach in 2D latent space. Benchmarking calculations were performed on five different datasets: stability constants of metal cations Ca2+, Gd3+ and Lu3+ complexes with organic ligands in water, aqueous solubility and activity of thrombin inhibitors. It has been shown that the performance of GTM-based regression models is similar to that obtained with some popular machine-learning methods (random forest, k-NN, M5P regression tree and PLS) and ISIDA fragment descriptors. By comparing GTM activity landscapes built both on predicted and experimental activities, we may visually assess the model's performance and identify the areas in the chemical space corresponding to reliable predictions. The applicability domain used in this work is based on data likelihood. Its application has significantly improved the model performances for 4 out of 5 datasets. [ABSTRACT FROM AUTHOR]

The method of substructural molecular fragments based on representation of the molecular graph by ensembles of fragments and involving calculations of those contributions to the given property is applied to the modelling of stability constants of the complexes of strontium(II) with organic ligands in water. Reliability of predictions of developed structure-property models was examined using three different test sets of structurally diverse ligands. The obtained models have been used for generation and screening of combinatorial library of virtual ligands. Some hypothetical efficient Sr(II) binders were suggested. [ABSTRACT FROM AUTHOR]

A novel type of molecular fields, Continuous Indicator Fields (CIFs), is suggested to provide 3D structural description of molecules. The values of CIFs are calculated as the degree to which a point with given 3D coordinates belongs to an atom of a certain type. They can be used similarly to standard physicochemical fields for building 3D structure-activity models. One can build CIF-based 3D structure-activity models in the framework of the continuous molecular fields approach described earlier (J Comput-Aided Mol Des 27 (5):427-442, ) for the case of physicochemical molecular fields. CIFs are thought to complement and further extend traditional physicochemical fields. The models built with CIFs can be interpreted in terms of preferable and undesirable positions of certain types of atoms in space. This helps to understand which changes in chemical structure should be made in order to design a compound possessing desirable properties. We have demonstrated that CIFs can be considered as 3D analogues of 2D topological molecular fragments. The performance of this approach is demonstrated in structure-activity studies of thrombin inhibitors, multidentate N-heterocyclic ligands for Am/Eu separation, and coloring dyes. [ABSTRACT FROM AUTHOR]

In this paper, we report comprehensive experimental and chemoinformatics analyses of the solubility of small organic molecules ("fragments") in dimethyl sulfoxide (DMSO) in the context of their ability to be tested in screening experiments. Here, DMSO solubility of 939 fragments has been measured experimentally using an NMR technique. A Support Vector Classification model was built on the obtained data using the ISIDA fragment descriptors. The analysis revealed 34 outliers: experimental issues were retrospectively identified for 28 of them. The updated model performs well in 5-fold cross-validation (balanced accuracy = 0.78). The datasets are available on the Zenodo platform (DOI:10.5281/zenodo.4767511) and the model is available on the website of the Laboratory of Chemoinformatics. [ABSTRACT FROM AUTHOR]

This user guide describes the rationale behind, and the modus operandi of a Unix script-driven package for evolutionary searching of optimal Support Vector Machine model parameters as computed by the libsvm package, leading to support vector machine models of maximal predictive power and robustness. Unlike common libsvm parameterizing engines, the current distribution includes the key choice of best-suited sets of attributes/descriptors, in addition to the classical libsvm operational parameters (kernel choice, kernel parameters, cost, and so forth), allowing a unified search in an enlarged problem space. It relies on an aggressive, repeated cross-validation scheme to ensure a rigorous assessment of model quality. Primarily designed for chemoinformatics applications, it also supports the inclusion of decoy instances, for which the explained property (bioactivity) is, strictly speaking, unknown but presumably "inactive", thus additionally testing the robustness of a model to noise. The package was developed with parallel computing in mind, supporting execution on both multi-core workstations as well as compute cluster environments. It can be downloaded from http://infochim.u-strasbg.fr/spip.php?rubrique178. [ABSTRACT FROM AUTHOR]

High-throughput assays challenge us to extract knowledge from multi-ligand, multi-target activity data. In QSAR, weights are statically fitted to each ligand descriptor with respect to a single endpoint or target. However, computational chemogenomics (CG) has demonstrated benefits of learning from entire grids of data at once, rather than building target-specific QSARs. A possible reason for this is the emergence of inductive knowledge transfer (IT) between targets, providing statistical robustness to the model, with no assumption about the structure of the targets. Relevant protein descriptors in CG should allow one to learn how to dynamically adjust ligand attribute weights with respect to protein structure. Hence, models built through explicit learning (EL) by including protein information, while benefitting from IT enhancement, should provide additional predictive capability, notably for protein deorphanization. This interplay between IT and EL in CG modeling is not sufficiently studied. While IT is likely to occur irrespective of the injected target information, it is not clear whether and when boosting due to EL may occur. EL is only possible if protein description is appropriate to the target set under investigation. The key issue here is the search for evidence of genuine EL exceeding expectations based on pure IT. We explore the problem in the context of Support Vector Regression, using more than 9,400 $$pK_i$$ values of 31 GPCRs, where compound-protein interactions are represented by the concatenation of vectorial descriptions of compounds and proteins. This provides a unified framework to generate both IT-enhanced and potentially EL-enabled models, where the difference is toggled by supplied protein information. For EL-enabled models, protein information includes genuine protein descriptors such as typical sequence-based terms, but also the experimentally determined affinity cross-correlation fingerprints. These latter benchmark the expected behavior of a quasi-ideal descriptor capturing the actual functional protein-protein relatedness, and therefore thought to be the most likely to enable EL. EL- and IT-based methods were benchmarked alongside classical QSAR, with respect to cross-validation and deorphanization challenges. A rational method for projecting benchmarked methodologies into a strategy space is given, in the aims that the projection will provide directions for the types of molecule designs possible using a given methodology. While EL-enabled strategies outperform classical QSARs and favorably compare to similar published results, they are, in all respects evaluated herein, not strongly distinguished from IT-enhanced models. Moreover, EL-enabled strategies failed to prove superior in deorphanization challenges. Therefore, this paper raises caution that, contrary to common belief and intuitive expectation, the benefits of chemogenomics models over classical QSAR are quite possibly due less to the injection of protein-related information, and rather impacted more by the effect of inductive transfer, due to simultaneous learning from all of the modeled endpoints. These results show that the field of protein descriptor research needs further improvements to truly realize the expected benefit of EL. [ABSTRACT FROM AUTHOR]

The Online Chemical Modeling Environment is a web-based platform that aims to automate and simplify the typical steps required for QSAR modeling. The platform consists of two major subsystems: the database of experimental measurements and the modeling framework. A user-contributed database contains a set of tools for easy input, search and modification of thousands of records. The OCHEM database is based on the wiki principle and focuses primarily on the quality and verifiability of the data. The database is tightly integrated with the modeling framework, which supports all the steps required to create a predictive model: data search, calculation and selection of a vast variety of molecular descriptors, application of machine learning methods, validation, analysis of the model and assessment of the applicability domain. As compared to other similar systems, OCHEM is not intended to re-implement the existing tools or models but rather to invite the original authors to contribute their results, make them publicly available, share them with other users and to become members of the growing research community. Our intention is to make OCHEM a widely used platform to perform the QSPR/QSAR studies online and share it with other users on the Web. The ultimate goal of OCHEM is collecting all possible chemoinformatics tools within one simple, reliable and user-friendly resource. The OCHEM is free for web users and it is available online at . [ABSTRACT FROM AUTHOR]

Chemical reactions always involve several molecules of two types, reactants and products. Existing data mining techniques, eg. Quantitative Structure Activity Relationship (QSAR) methods, deal with individual molecules only. In this article, we propose to use a Condensed Graph of Reaction (CGR) to merge all molecules involved in a reaction into one molecular graph. This allows one to consider reactions as pseudo-molecules and to develop QSAR models based on fragment descriptors. Then ISIDA (In SIlico Design and Analysis) fragment descriptors built from CGRs are used to generate models for the rate constant of SN2 reactions in water, using three usual attribute-value regression algorithms (linear regression, support vector machine, and regression trees). This approach is compared favorably to two state-of-the-art relational data mining techniques. [ABSTRACT FROM AUTHOR]

Building reliable and robust quantitative structure–property relationship (QSPR) models is a challenging task. First, the experimental data needs to be obtained, analyzed and curated. Second, the number of available methods is continuously growing and evaluating different algorithms and methodologies can be arduous. Finally, the last hurdle that researchers face is to ensure the reproducibility of their models and facilitate their transferability into practice. In this work, we introduce QSPRpred, a toolkit for analysis of bioactivity data sets and QSPR modelling, which attempts to address the aforementioned challenges. QSPRpred's modular Python API enables users to intuitively describe different parts of a modelling workflow using a plethora of pre-implemented components, but also integrates customized implementations in a "plug-and-play" manner. QSPRpred data sets and models are directly serializable, which means they can be readily reproduced and put into operation after training as the models are saved with all required data pre-processing steps to make predictions on new compounds directly from SMILES strings. The general-purpose character of QSPRpred is also demonstrated by inclusion of support for multi-task and proteochemometric modelling. The package is extensively documented and comes with a large collection of tutorials to help new users. In this paper, we describe all of QSPRpred's functionalities and also conduct a small benchmarking case study to illustrate how different components can be leveraged to compare a diverse set of models. QSPRpred is fully open-source and available at https://github.com/CDDLeiden/QSPRpred. Scientific Contribution QSPRpred aims to provide a complex, but comprehensive Python API to conduct all tasks encountered in QSPR modelling from data preparation and analysis to model creation and model deployment. In contrast to similar packages, QSPRpred offers a wider and more exhaustive range of capabilities and integrations with many popular packages that also go beyond QSPR modelling. A significant contribution of QSPRpred is also in its automated and highly standardized serialization scheme, which significantly improves reproducibility and transferability of models. [ABSTRACT FROM AUTHOR]

Background: Chemicalsmay lead to acute liver injuries, posing a serious threat to human health. Achieving the precise safety profile of a compound is challenging due to the complex and expensive testing procedures. In silico approaches will aid in identifying the potential risk of drug candidates in the initial stage of drug development and thus mitigating the developmental cost. Methods: In current studies, QSAR models were developed for hepatotoxicity predictions using the ensemble strategy to integrate machine learning (ML) and deep learning (DL) algorithms using various molecular features. A large dataset of 2588 chemicals and drugswas randomly divided into training (80%) and test (20%) sets, followed by the training of individual base models using diverse machine learning or deep learning based on three different kinds of descriptors and fingerprints. Feature selection approaches were employed to proceed with model optimizations based on the model performance. Hybrid ensemble approaches were further utilized to determine the method with the best performance. Results: The voting ensemble classifier emerged as the optimal model, achieving an excellent prediction accuracy of 80.26%, AUC of 82.84%, and recall of over 93% followed by bagging and stacking ensemble classifiers method. The model was further verified by an external test set, internal 10-fold cross-validation, and rigorous benchmark training, exhibiting much better reliability than the published models. Conclusion: The proposed ensemble model offers a dependable assessment with a good performance for the prediction regarding the risk of chemicals and drugs to induce liver damage. [ABSTRACT FROM AUTHOR]

Nowadays, an efficient and robust virtual screening procedure is crucial in the drug discovery process, especially when performed on large and chemically diverse databases. Virtual screening methods, like molecular docking and classic QSAR models, are limited in their ability to handle vast numbers of compounds and to learn from scarce data, respectively. In this study, we introduce a universal methodology that uses a machine learning-based approach to predict docking scores without the need for time-consuming molecular docking procedures. The developed protocol yielded 1000 times faster binding energy predictions than classical docking-based screening. The proposed predictive model learns from docking results, allowing users to choose their preferred docking software without relying on insufficient and incoherent experimental activity data. The methodology described employs multiple types of molecular fingerprints and descriptors to construct an ensemble model that further reduces prediction errors and is capable of delivering highly precise docking score values for monoamine oxidase ligands, enabling faster identification of promising compounds. An extensive pharmacophore-constrained screening of the ZINC database resulted in a selection of 24 compounds that were synthesized and evaluated for their biological activity. A preliminary screen discovered weak inhibitors of MAO-A with a percentage efficiency index close to a known drug at the lowest tested concentration. The approach presented here can be successfully applied to other biological targets as target-specific knowledge is not incorporated at the screening phase. [ABSTRACT FROM AUTHOR]

In this study, quantitative structure-activity relationship (QSAR) analysis was conducted on 20 homologous compounds of benzimidazole derivatives. The structures of the benzimidazole derivatives were optimized using the semiempirical Parameterized Model 3 method of HyperChem for Windows 8.0 to obtain 14 descriptors. Then, multiple linear regression (MLR) analysis was performed using the backward method. The results of the MLR analysis obtained four new QSAR equation models. Based on statistical criteria, model 1 was determined as the best QSAR equation model in predicting the theoretical IC50 values of the new benzimidazole derivatives. As many as 20 new compounds of benzimidazole derivatives were modeled, of which 13 new compounds (23, 24, 25, 26, 27, 28, 29, 30, 31, 37, 38, 39, and 40 compounds) were recommended for synthesis in the laboratory because these compounds of benzimidazole derivatives havethey theoretically had higher antimalarial activity than chloroquine. [ABSTRACT FROM AUTHOR]

The 3C-like Proteinase (3CLpro) of novel coronaviruses is intricately linked to viral replication, making it a crucial target for antiviral agents. In this study, we employed two fingerprint descriptors (ECFP_4 and MACCS) to comprehensively characterize 889 compounds in our dataset. We constructed 24 classification models using machine learning algorithms, including Support Vector Machine (SVM), Random Forest (RF), extreme Gradient Boosting (XGBoost), and Deep Neural Networks (DNN). Among these models, the DNN- and ECFP_4-based Model 1D_2 achieved the most promising results, with a remarkable Matthews correlation coefficient (MCC) value of 0.796 in the 5-fold cross-validation and 0.722 on the test set. The application domains of the models were analysed using dSTD-PRO calculations. The collected 889 compounds were clustered by K-means algorithm, and the relationships between structural fragments and inhibitory activities of the highly active compounds were analysed for the 10 obtained subsets. In addition, based on 464 3CLpro inhibitors, 27 QSAR models were constructed using three machine learning algorithms with a minimum root mean square error (RMSE) of 0.509 on the test set. The applicability domains of the models and the structure-activity relationships responded from the descriptors were also analysed. [ABSTRACT FROM AUTHOR]

Quantitative structure-activity relationship (QSAR) modeling is a powerful tool for drug discovery, yet the lack of interpretability of commonly used QSAR models hinders their application in molecular design. We propose a similarity-based regression framework, topological regression (TR), that offers a statistically grounded, computationally fast, and interpretable technique to predict drug responses. We compare the predictive performance of TR on 530 ChEMBL human target activity datasets against the predictive performance of deep-learning-based QSAR models. Our results suggest that our sparse TR model can achieve equal, if not better, performance than the deep learning-based QSAR models and provide better intuitive interpretation by extracting an approximate isometry between the chemical space of the drugs and their activity space. Quantitative structure-activity relationships (QSAR) models are widely used in drug discovery, but have limitations in their interpretability and accuracy near activity cliffs. Here the authors use a topological regression framework to increase QSAR interpretability and efficiency. [ABSTRACT FROM AUTHOR]

Histone deacetylase 6 (HDAC6) is a promising drug target for the treatment of human diseases such as cancer, neurodegenerative diseases (in particular, Alzheimer's disease), and multiple sclerosis. Considerable attention is paid to the development of selective non-toxic HDAC6 inhibitors. To this end, we successfully form a set of 3854 compounds and proposed adequate regression QSAR models for HDAC6 inhibitors. The models have been developed using the PubChem, Klekota-Roth, 2D atom pair fingerprints, and RDkit descriptors and the gradient boosting, support vector machines, neural network, and k-nearest neighbours methods. The models are integrated into the developed HT_PREDICT application, which is freely available at . In vitro studies have confirmed the predictive ability of the proposed QSAR models integrated into the HT_PREDICT web application. In addition, the virtual screening performed with the HT_PREDICT web application allowed us to propose two promising inhibitors for further investigations. [ABSTRACT FROM AUTHOR]

Artificial neural networks (ANNs) are nowadays applied as the most efficient methods in the majority of machine learning approaches, including data-driven modeling for assessment of the toxicity of chemicals. We developed a combined neural network methodology that can be used in the scope of new approach methodologies (NAMs) assessing chemical or drug toxicity. Here, we present QSAR models for predicting the physical and biochemical properties of molecules of three different datasets: aqueous solubility, acute fish toxicity toward fat head minnow, and bio-concentration factors. A novel neural network modeling method is developed by combining two neural network algorithms, namely, the counter-propagation modeling strategy (CP-ANN) with the back-propagation-of-errors algorithm (BPE-ANN). The advantage is a short training time, robustness, and good interpretability through the initial CP-ANN part, while the extension with BPE-ANN improves the precision of predictions in the range between minimal and maximal property values of the training data, regardless of the number of neurons in both neural networks, either CP-ANN or BPE-ANN. [ABSTRACT FROM AUTHOR]

Transfer learning is a machine learning technique that works well with chemical endpoints, with several papers confirming its efficiency. Although effective, because the choice of source/assistant tasks is non-trivial, the application of this technique is severely limited by the domain knowledge of the modeller. Considering this limitation, we developed a purely data-driven approach for source task selection that abstracts the need for domain knowledge. To achieve this, we created a supervised learning setting in which transfer outcome (positive/negative) is the variable to be predicted, and a set of six transferability metrics, calculated based on information from target and source datasets, are the features for prediction. We used the ChEMBL database to generate 100,000 transfers using random pairing, and with these transfers, we trained and evaluated our transferability prediction model (TP-Model). Our TP-Model achieved a 135-fold increase in precision while achieving a sensitivity of 92%, demonstrating a clear superiority against random search. In addition, we observed that transfer learning could provide considerable performance increases when applicable, with an average Matthews Correlation Coefficient (MCC) increase of 0.19 when using a single source and an average MCC increase of 0.44 when using multiple sources. [ABSTRACT FROM AUTHOR]

A series of diverse organic compounds impose serious detrimental effects on the health of living organisms and the environment. Determination of the structural aspects of compounds that impart toxicity and evaluation of the same is crucial before public usage. The present study aims to determine the structural characteristics of compounds for Tetrahymena pyriformis toxicity using the q-RASTR (Quantitative Read Across Structure–Toxicity Relationship) model. It was developed using RASTR and 2-D descriptors for a dataset of 1792 compounds with defined endpoint (pIGC50) against a model organism, T. pyriformis. For the current study, the whole dataset was divided based on activity/property into the training and test sets, and the q-RASTR model was developed employing six descriptors (three latent variables) having r2, Q2F1 and Q2 values of 0.739, 0.767, and 0.735, respectively. The generated model was thoroughly validated using internationally recognized internal and external validation criteria to assess the model's dependability and predictability. It was highlighted that high molecular weight, aromatic hydroxyls, nitrogen, double bonds, and hydrophobicity increase the toxicity of organic compounds. The current study demonstrates the applicability of the RASTR algorithm in QSTR model development for the prediction of toxic chemicals (pIGC50) towards T. pyriformis. [ABSTRACT FROM AUTHOR]

An abstract is presented of a research paper "A Unified Approach to the Applicability Domain Problem of QSAR models," by Gilles Marcou and colleagues, which was presented at the 5th German Conference on Chemoinformatics held in Germany on November 8-10, 2009.

A quantitative analysis of the relationship between the structure and inhibitory activity against the herpes simplex virus thymidine kinase (HSV-TK) was performed for the series of 5-ethyluridine, N2-guanine, and 6-oxopurines derivatives with pronounced anti-herpetic activity (IC50 = 0.09 ÷ 160,000 μmol/L) using the GUSAR 2019 software. On the basis of the MNA and QNA descriptors and whole-molecule descriptors using the self-consistent regression, 12 statistically significant consensus models for predicting numerical pIC50 values were constructed. These models demonstrated high predictive accuracy for the training and test sets. Molecular fragments of HSV-1 and HSV-2 TK inhibitors that enhance or diminish the anti-herpetic activity are considered. Virtual screening of the ChEMBL database using the developed QSAR models revealed 42 new effective HSV-1 and HSV-2 TK inhibitors. These compounds are promising for further research. The obtained data open up new opportunities for developing novel effective inhibitors of TK. [ABSTRACT FROM AUTHOR]

In this study, we use machine learning algorithms with QM-derived COSMO-RS descriptors, along with Morgan fingerprints, to predict the absolute solubility of drug-like compounds. The QM-derived descriptors account for the molecular properties of the solute, i.e., the solute–solute interactions in an artificial-liquid-state (super-cooled liquid), and the solute–solvent interactions in solution. We employ two main approaches to predict solubility: (i) a hypothetical pathway that involves melting the solute at room temperature T = T¯ ( Δ fus G A ⊖ ) and mixing the artificially liquid solute into the solvent ( Δ m G A : B ⊖ ). In this approach Δ fus G A ⊖ is predicted using machine learning models, and the Δ m G A : B ⊖ is obtained from COSMO-RS calculations; (ii) direct solubility prediction using machine learning algorithms. The models were trained on a large number of Bayer in-house compounds for which water solubility data is available at physiological pH of 6.5 and ambient temperature. We also evaluated our models using external datasets from a solubility challenge. Our models present great improvements compared to the absolute solubility prediction with the QSAR model for the artificial liquid state as implemented in the COSMOtherm software, for both in-house and external datasets. We are furthermore able to demonstrate the superiority of QM-derived descriptors compared to cheminformatics descriptors. We finally present low-cost alternative models using fragment-based COSMOquick calculations with only marginal reduction in the quality of predicted solubility. [ABSTRACT FROM AUTHOR]

The risk evaluation for pharmacological therapy during pregnancy is critical for maternal and fetal health. The initial risk assessment stage, the risk measurement, begins with pregnancy‐labeling categories (A, B, C, D, and X) for pharmaceuticals defined by the US Food and Drug Administration (FDA). Recently, in silico methods have been preferred in toxicology studies to eliminate ethical issues before conducting clinical toxicology studies and animal experiments. Quantitative structure–activity relationship (QSAR) modeling is one of the in silico methodologies. The research focuses on creating a QSAR model that predicts the five FDA pregnancy categories of medications. Our dataset included 868 pharmaceuticals, containing nearly every pharmacological group collected from the FDA. 2D‐molecular descriptors were calculated using PaDEL software. Twenty‐four QSAR models were developed, and the best four models were discussed. The results of the models were compared according to sensitivity, accuracy, F‐score, specificity, receiver operating characteristic (ROC) values, and Matthews correlation coefficient. Considering the statistical results, random forest is the best model for determining the pregnancy risk category of drugs. The accuracy of the model was 76.49% for internal and 93.58% for external validation. According to the kappa statistics, there is an average agreement of 0.583 for internal validation and a perfect agreement of 0.893 for external validation. Because the error rates of the model are very close to 0, the model is highly accurate. Consequently, our novel QSAR model gives guidance on the safe use of pharmaceuticals during pregnancy without requiring animal tests or clinical trials on pregnant women. In this study, we created a quantitative structure–activity relationship (QSAR) model to predict the FDA pregnancy categories of 868 pharmaceuticals from various pharmacological groups. Our statistical analysis showed that the random forest model performed the best, with 76.46% accuracy for internal and 93.58% for external validation. Our QSAR model provides safe guidance for using medications during pregnancy without requiring animal tests or clinical trials. [ABSTRACT FROM AUTHOR]

Environmental protection and sustainability is the development goal that countries all over the world are pursuing. Ionic liquids (ILs), as a new type of green material, have a great application prospect. And the quantitative structure–activity relationship (QSAR) is significant for the research of ILs. To better understand the role played by QSAR in the research of ILs, 4139 literatures published in the WOS database from 2002 to 2022 were used for bibliometric analysis, and different types of knowledge maps were mapped to obtain the current status and trends of IL research applied QSAR. The distribution pattern of the literature output chronology, country, institution, author cooperation, and major source journals can be obtained through the research of the distribution of literature. Through core literature, dual-map overlays, and evolutionary path analysis, the research knowledge base was obtained mainly including ionic liquid toxicological properties research, environmental protection and sustainability, ionic liquid design, and mild steel corrosion inhibition; through the co-occurrence and evolution of keywords, the current research hotspots are basic properties of ILs, corrosion inhibition of mild steel, the effect of toxicity on the environment, QSAR modeling methods, solvent application of ILs, and drug design. [ABSTRACT FROM AUTHOR]

Human soluble epoxide hydrolase (sEH), a dual-functioning homodimeric enzyme with hydrolase and phosphatase activities, is known for its pivotal role in the hydrolysis of epoxyeicosatrienoic acids. Inhibitors targeting sEH have shown promising potential in the treatment of various life-threatening diseases. In this study, we employed a range of in silico modeling approaches to investigate a diverse dataset of structurally distinct sEH inhibitors. Our primary aim was to develop predictive and validated models while gaining insights into the structural requirements necessary for achieving higher inhibitory potential. To accomplish this, we initially calculated molecular descriptors using nine different descriptor-calculating tools, coupled with stochastic and non-stochastic feature selection strategies, to identify the most statistically significant linear 2D-QSAR model. The resulting model highlighted the critical roles played by topological characteristics, 2D pharmacophore features, and specific physicochemical properties in enhancing inhibitory potential. In addition to conventional 2D-QSAR modeling, we implemented the Transformer-CNN methodology to develop QSAR models, enabling us to obtain structural interpretations based on the Layer-wise Relevance Propagation (LRP) algorithm. Moreover, a comprehensive 3D-QSAR analysis provided additional insights into the structural requirements of these compounds as potent sEH inhibitors. To validate the findings from the QSAR modeling studies, we performed molecular dynamics (MD) simulations using selected compounds from the dataset. The simulation results offered crucial insights into receptor–ligand interactions, supporting the predictions obtained from the QSAR models. Collectively, our work serves as an essential guideline for the rational design of novel sEH inhibitors with enhanced therapeutic potential. Importantly, all the in silico studies were performed using open-access tools to ensure reproducibility and accessibility. [ABSTRACT FROM AUTHOR]

Drug candidates identified by the pharmaceutical industry typically have unique structural characteristics to ensure they interact strongly and specifically with their biological targets. Identifying these characteristics is a key challenge for developing new drugs, and quantitative structure-activity relationship (QSAR) analysis has generally been used to perform this task. QSAR models with good predictive power improve the cost and time efficiencies invested in compound development. Generating these good models depends on how well differences between "active" and "inactive" compound groups can be conveyed to the model to be learned. Efforts to solve this difference issue have been made, including generating a "molecular descriptor" that compressively expresses the structural characteristics of compounds. From the same perspective, we succeeded in developing the Activity Differences-Quantitative Structure-Activity Relationship (ADis-QSAR) model by generating molecular descriptors that more explicitly convey features of the group through a pair system that performs direct connections between active and inactive groups. We used popular machine learning algorithms, such as Support Vector Machine, Random Forest, XGBoost and Multi-Layer Perceptron for model learning and evaluated the model using scores such as accuracy, area under curve, precision and specificity. The results showed that the Support Vector Machine performed better than the others. Notably, the ADis-QSAR model showed significant improvements in meaningful scores such as precision and specificity compared to the baseline model, even in datasets with dissimilar chemical spaces. This model reduces the risk of selecting false positive compounds, improving the efficiency of drug development. [ABSTRACT FROM AUTHOR]

The HDAC6 (histone deacetylase 6) enzyme plays a key role in many biological processes, including cell division, apoptosis, and immune response. To date, HDAC6 inhibitors are being developed as effective drugs for the treatment of various diseases. In this work, adequate QSAR models of HDAC6 inhibitors are proposed. They are integrated into the developed application HDAC6 Detector, which is freely available at . The web application HDAC6 Detector can be used to perform virtual screening of HDAC6 inhibitors by dividing the compounds into active and inactive ones relative to the reference vorinostat compound (IC50 = 10.4 nM). The web application implements a structural interpretation of the developed QSAR models. In addition, the application can evaluate the compliance of a compound with Lipinski's rule. The developed models are used for virtual screening of a series of 12 new hydroxamic acids, namely, the derivatives of 3-hydroxyquinazoline-4(3H)-ones and 2-aryl-2,3-dihydroquinazoline-4(1H)-ones. In vitro evaluation of the inhibitory activity of this series of compounds against HDAC6 allowed us to confirm the results of virtual screening and to select promising compounds V-6 and V-11, the IC50 of which is 0.99 and 0.81 nM, respectively. [ABSTRACT FROM AUTHOR]

In de novo molecular design, quantitative structure-activity relationship (QSAR) and quantitative structure-property relationship (QSPR) models are important to estimate activity and property values, respectively, for virtual molecular structures. To operate QSAR and QSPR models appropriately, applicability domains (ADs) of the models must be defined because estimated values are unreliable for virtual molecular structures that are dissimilar to structures of training compounds. We describe several methods to construct AD models, and then introduce a structure generator to change molecular structures that exist outside ADs to conform to ADs. [ABSTRACT FROM AUTHOR]

The application of QSAR analysis dates back a half-century ago and is currently continuously employed in any rational drug design. The multi-dimensional QSAR modeling can be a promising tool for researchers to develop reliable predictive QSAR models for designing novel compounds. In the present work, we studied inhibitors of human aldose reductase (AR) to generate multi-dimensional QSAR models using 3D- and 6D-QSAR methods. For this purpose, Pentacle and Quasar's programs were used to produce the QSAR models using corresponding dissociation constant (Kd) values. By inspecting the performance metrics of the generated models, we achieved similar results with comparable internal validation statistics. However, considering the externally validated values, 6D-QSAR models provide significantly better prediction of endpoint values. The obtained results suggest that the higher the dimension of the QSAR model, the higher the performance of the generated model. However, more studies are required to verify these outcomes. [ABSTRACT FROM AUTHOR]

There is a strong interest in the development of microsomal prostaglandin E2 synthase‐1 (mPGES‐1) inhibitors of their potential to safely and effectively treat inflammation. Herein, 70 QSAR models were built on the dataset (735 mPGES‐1 inhibitors) characterized with RDKit descriptors by multiple linear regression (MLR), support vector machine (SVM), random forest (RF), deep neural networks (DNN), and eXtreme Gradient Boosting (XGBoost). The other three regression models on the dataset are represented by SMILES using self‐attention recurrent neural networks (RNN) and Graph Convolutional Networks (GCN). For the best model (Model C2), which was developed by SVM with RDKit descriptors, the coefficient of determination (R2) of 0.861 and root mean squared error (RMSE) of 0.235 were achieved for the test set. Additionally, R2 of 0.692 and RMSE of 0.383 were obtained on the external test set. We investigated the applicability domain (AD) of Model C2 with the rivality index (RI), the prediction of Model C2 on 78.92% of molecules in the test set, and 78.33% of molecules in the external test set were reliable. After dissecting the RDKit descriptors of Model C2, we found important physicochemical properties of highly active mPGES‐1 inhibitors. Besides, by analyzing the attention weight of each atom of each inhibitor from the attention layer, we found that the benzamide group and the trifluoromethyl cyclohexane group are favorable substructures for mPGES‐1 inhibitors. [ABSTRACT FROM AUTHOR]

To facilitate the identification of novel MAO-B inhibitors, we elaborated a consolidated computational approach, including a pharmacophoric atom-based 3D quantitative structure–activity relationship (QSAR) model, activity cliffs, fingerprint, and molecular docking analysis on a dataset of 126 molecules. An AAHR.2 hypothesis with two hydrogen bond acceptors (A), one hydrophobic (H), and one aromatic ring (R) supplied a statistically significant 3D QSAR model reflected by the parameters: R2 = 0.900 (training set); Q2 = 0.774 and Pearson's R = 0.884 (test set), stability s = 0.736. Hydrophobic and electron-withdrawing fields portrayed the relationships between structural characteristics and inhibitory activity. The quinolin-2-one scaffold has a key role in selectivity towards MAO-B with an AUC of 0.962, as retrieved by ECFP4 analysis. Two activity cliffs showing meaningful potency variation in the MAO-B chemical space were observed. The docking study revealed interactions with crucial residues TYR:435, TYR:326, CYS:172, and GLN:206 responsible for MAO-B activity. Molecular docking is in consensus with and complementary to pharmacophoric 3D QSAR, ECFP4, and MM-GBSA analysis. The computational scenario provided here will assist chemists in quickly designing and predicting new potent and selective candidates as MAO-B inhibitors for MAO-B-driven diseases. This approach can also be used to identify MAO-B inhibitors from other libraries or screen top molecules for other targets involved in suitable diseases. [ABSTRACT FROM AUTHOR]

The development of organelle-specific fluorescent probes has been impeded by the absence of a comprehensive understanding of the relationship between the physicochemical properties of fluorescent probes and their selectivity towards specific organelles. Although a few machine learning models have suggested several physicochemical parameters that control the target organelle of the probes and have attempted to predict the target organelles, they have been challenged by low accuracy and a limited range of applicable organelles. Herein, we report a multi-organelle prediction QSAR model that is capable of predicting the destination of probes among nine categories, including cytosol, endoplasmic reticulum, Golgi body, lipid droplet, lysosome, mitochondria, nucleus, plasma membrane, and no entry. The model is trained using the Random Forest algorithm with a dataset of 350 organelle-specific fluorescent probes and 786 descriptors, and it is able to predict the target organelles of fluorescent probes with an accuracy of 75%. The MDI analysis of the model identifies 38 key parameters that have a significant impact on the organelle selectivity of the probes, including LogD, pKa, hydrophilic-lipophilic balance (HLB), and topological polar surface area (TPSA). This prediction model may be useful in developing new organelle-specific fluorescent probes by providing crucial variables that determine the destination of the probes. [ABSTRACT FROM AUTHOR]

This brief literature survey groups the (numerical) validation methods and emphasizes the contradictions and confusion considering bias, variance and predictive performance. A multicriteria decision-making analysis has been made using the sum of absolute ranking differences (SRD), illustrated with five case studies (seven examples). SRD was applied to compare external and cross-validation techniques, indicators of predictive performance, and to select optimal methods to determine the applicability domain (AD). The ordering of model validation methods was in accordance with the sayings of original authors, but they are contradictory within each other, suggesting that any variant of cross-validation can be superior or inferior to other variants depending on the algorithm, data structure and circumstances applied. A simple fivefold cross-validation proved to be superior to the Bayesian Information Criterion in the vast majority of situations. It is simply not sufficient to test a numerical validation method in one situation only, even if it is a well defined one. SRD as a preferable multicriteria decision-making algorithm is suitable for tailoring the techniques for validation, and for the optimal determination of the applicability domain according to the dataset in question. [ABSTRACT FROM AUTHOR]

Introduction and methodology: Pairs of similar compounds that only differ by a small structural modification but exhibit a large difference in their binding affinity for a given target are known as activity cliffs (ACs). It has been hypothesised that QSAR models struggle to predict ACs and that ACs thus form a major source of prediction error. However, the AC-prediction power of modern QSAR methods and its quantitative relationship to general QSAR-prediction performance is still underexplored. We systematically construct nine distinct QSAR models by combining three molecular representation methods (extended-connectivity fingerprints, physicochemical-descriptor vectors and graph isomorphism networks) with three regression techniques (random forests, k-nearest neighbours and multilayer perceptrons); we then use each resulting model to classify pairs of similar compounds as ACs or non-ACs and to predict the activities of individual molecules in three case studies: dopamine receptor D2, factor Xa, and SARS-CoV-2 main protease. Results and conclusions: Our results provide strong support for the hypothesis that indeed QSAR models frequently fail to predict ACs. We observe low AC-sensitivity amongst the evaluated models when the activities of both compounds are unknown, but a substantial increase in AC-sensitivity when the actual activity of one of the compounds is given. Graph isomorphism features are found to be competitive with or superior to classical molecular representations for AC-classification and can thus be employed as baseline AC-prediction models or simple compound-optimisation tools. For general QSAR-prediction, however, extended-connectivity fingerprints still consistently deliver the best performance amongs the tested input representations. A potential future pathway to improve QSAR-modelling performance might be the development of techniques to increase AC-sensitivity. [ABSTRACT FROM AUTHOR]

QSAR models are widely and successfully used in many research areas. The success of such models highly depends on molecular descriptors typically classified as 1D, 2D, 3D, or 4D. While 3D information is likely important, e. g., for modeling ligand‐protein binding, previous comparisons between the performances of 2D and 3D descriptors were inconclusive. Yet in such comparisons the modeled ligands were not necessarily represented by their bioactive conformations. With this in mind, we mined the PDB for sets of protein‐ligand complexes sharing the same protein for which uniform activity data were reported. The results, totaling 461 structures spread across six series were compiled into a carefully curated, first of its kind dataset in which each ligand is represented by its bioactive conformation. Next, each set was characterized by 2D, 3D and 2D + 3D descriptors and modeled using three machine learning algorithms, namely, k‐Nearest Neighbors, Random Forest and Lasso Regression. Models' performances were evaluated on external test sets derived from the parent datasets either randomly or in a rational manner. We found that many more significant models were obtained when combining 2D and 3D descriptors. We attribute these improvements to the ability of 2D and 3D descriptors to code for different, yet complementary molecular properties. [ABSTRACT FROM AUTHOR]

Hydroxylated polychlorinated biphenyls (OH-PCBs), a series of toxic chemical compounds produced via biotic and abiotic transformation of polychlorinated biphenyls (PCBs), are known to cause endocrine disruption by interacting inappropriately with human nuclear receptors. Due to occurrence of high numbers of inactive OH-PCB congeners recorded in many experimental toxicity studies, it is pertinent to develop rapid and inexpensive QSAR models that can reliably predict the activities of OH-PCB congeners prior to experimental testing. Using a combination of genetic function approximation and multiple linear regression methods, a local QSAR model, consisting of six 2D descriptors (MATS1s, VE3_DzZ, VE1_Dzp, SpMin8_Bhv, SpMax5_Bhi, topoRadius) and two 3D descriptors (RDF95u, RDF45m), was developed from a training set of 44 OH-PCBs. Statistical parameters for fitting ( R 2 = 0.8902, R adj 2 = 0.8651, s = 0.2840), cross-validation ( Q LOO 2 = 0.8201, RMSE CV = 0.3242), and Y-randomization ( cR p 2 = 0.8019) obtained for the developed QSAR model indicate that the model is reliable, robust, and provides good fit to the data in the training set. The results of external validation carried out on 20 OH-PCBs in the test set also indicate that the developed QSAR model possessed good external predictivity and can be used to predict the agonistic activities of untested OH-PCB congeners to constitutive androstane receptor. [ABSTRACT FROM AUTHOR]

Amide herbicides have been widely applied in agriculture and found to be widespread and affect nontarget organisms in the environment. To better understand the biotoxicity mechanisms and determine the toxicity to the nontarget organisms for the hazard and risk assessment, five QSAR models were developed for the biotoxicity prediction of amide herbicides toward five aquatic and terrestrial organisms (including algae, daphnia, fish, earthworm and avian species), based on toxicity concentration and quantitative molecular descriptors. The results showed that the developed models complied with OECD principles for QSAR validation and presented excellent performances in predictive ability. In combination, the investigated QSAR relationship led to the toxicity mechanisms that eleven electrical descriptors (EHOMO, ELUMO, αxx, αyy, αzz, μ, qN−, Qxx, Qyy, qH+, and q−), four thermodynamic descriptors (Cv, Sθ, Hθ, and ZPVE), and one steric descriptor (Vm) were strongly associated with the biotoxicity of amide herbicides. Electrical descriptors showed the greatest impacts on the toxicity of amide herbicides, followed by thermodynamic and steric descriptors. [ABSTRACT FROM AUTHOR]

The availability of experimental nanotoxicity data is in general limited which warrants both the use of in silico methods for data gap filling and exploring novel methods for effective modeling. Read-Across Structure-Activity Relationship (RASAR) is an emerging cheminformatic approach that combines the usefulness of a QSAR model and similarity-based Read-Across predictions. In this work, we have generated simple, interpretable, and transferable quantitative-RASAR (q-RASAR) models which can efficiently predict the cytotoxicity of TiO2-based multi-component nanoparticles. A data set of 29 TiO2-based nanoparticles with specific amounts of noble metal precursors was rationally divided into training and test sets, and the Read-Across-based predictions for the test set were generated. The optimized hyperparameters and the similarity approach, which yield the best predictions, were used to calculate the similarity and error-based RASAR descriptors. A data fusion of the RASAR descriptors with the chemical descriptors was done followed by the best subset feature selection. The final set of selected descriptors was used to develop the q-RASAR models, which were validated using the stringent OECD criteria. Finally, a random forest model was also developed with the selected descriptors, which could efficiently predict the cytotoxicity of TiO2-based multi-component nanoparticles superseding previously reported models in the prediction quality thus showing the merits of the q-RASAR approach. To further evaluate the usefulness of the approach, we have applied the q-RASAR approach also to a second cytotoxicity data set of 34 heterogeneous TiO2-based nanoparticles which further confirmed the enhancement of external prediction quality of QSAR models after incorporation of RASAR descriptors. [ABSTRACT FROM AUTHOR]

Predictive QSAR models for the search of new adenosine A2A receptor antagonists were developed by using OCHEM platform. The predictive ability of the regression models has coefficient of determination q2 = 0.65−0.71 with cross‐validation and independent test set. The inhibition activities of novel fused 7‐deazaxanthine compounds were predicted by the developed QSAR models. A preparative method for the synthesis of pyrimido[5′,4′:4,5]pyrrolo[1,2‐a][1,4]diazepine derivatives was developed, and 11 new adenosine A2A receptor antagonists were obtained. Preliminary investigations into the toxicology of fused 7‐deazaxanthine compounds toward commonly used model organism to assess toxicity invertebrate cladoceran D. magna were also described. [ABSTRACT FROM AUTHOR]

Histone deacetylases play an important role in regulating gene expression by modifying histones and changing chromatin conformation. HDAC dysregulation is involved in many diseases, such as cancer, autoimmune and neurodegenerative diseases. Histone deacetylase 1 (HDAC1) inhibitors represent an important class of drugs. Quantitative Structure-Activity Relationship (QSAR) classification models were developed using 2D RDKit molecular descriptors; ECPF4 (Extended Connectivity Fingerprint) circular fingerprints; and the Random Forest, Gradient Boosting, and Support Vector Machine methods. The developed models were integrated into the HDAC1 PREDICTOR application, which is freely available at the link . The HDAC1 PREDICTOR web application allows one to reveal the compounds for which the predicted activity to inhibit HDAC1 is higher than that of the reference Vorinostat compound (IC50 = 11.08 nM). The algorithm implemented in HDAC1 PREDICTOR for determining the contributions of molecular fragments to the inhibitory activity can be used to find the molecule segments that increase or decrease the activity, enabling the researcher to conduct a rational molecular design of new highly active HDAC1 inhibitors. The developed QSAR models and the code for their construction in the Python programming language are freely available on the GitHub platform at . [ABSTRACT FROM AUTHOR]

Here we report the development of MolPredictX, an innovate and freely accessible web interface for biological activity predictions of query molecules. MolPredictX utilizes in‐house QSAR models to provide 27 qualitative predictions (active or inactive), and quantitative probabilities for bioactivity against parasitic (Trypanosoma and Leishmania), viral (Dengue, Sars‐CoV and Hepatitis C), pathogenic yeast (Candida albicans), bacterial (Salmonella enterica and Escherichia coli), and Alzheimer disease enzymes. In this article, we introduce the methodology and usability of this webtool, highlighting its potential role in the development of new drugs against a variety of diseases. MolPredictX is undergoing continuous development and is freely available at https://www.molpredictx.ufpb.br/. [ABSTRACT FROM AUTHOR]

Aurora kinase B (AKB) is a crucial signaling kinase with an important role in cell division. Therefore, inhibition of AKB is an attractive approach to the treatment of cancer. In the present work, extensive quantitative structure–activity relationships (QSAR) analysis has been performed using a set of 561 structurally diverse aurora kinase B inhibitors. The Organization for Economic Cooperation and Development (OECD) guidelines were used to develop a QSAR model that has high statistical performance (R2tr = 0.815, Q2LMO = 0.808, R2ex = 0.814, CCCex = 0.899). The seven-variable-based newly developed QSAR model has an excellent balance of external predictive ability (Predictive QSAR) and mechanistic interpretation (Mechanistic QSAR). The QSAR analysis successfully identifies not only the visible pharmacophoric features but also the hidden features. The analysis indicates that the lipophilic and polar groups—especially the H-bond capable groups—must be present at a specific distance from each other. Moreover, the ring nitrogen and ring carbon atoms play important roles in determining the inhibitory activity for AKB. The analysis effectively captures reported as well as unreported pharmacophoric features. The results of the present analysis are also supported by the reported crystal structures of inhibitors bound to AKB. [ABSTRACT FROM AUTHOR]

Relationships between toxicity and chemical hydrophobicity have been known for nearly 100 years in mammals and fish, typically using the log of the octanol:water partition coefficient (Kow). The current study reassessed the influence of mode of action (MOA) on acute aquatic toxicity-log Kow relationships using a comprehensive database of 617 organic chemicals with curated and standardized acute toxicity data that did not exceed solubility limits, their consensus log Kow values, and weight of evidence-based MOA classifications (including 6 broad and 26 specific MOAs). A total of 166 significant (p < 0.05) log Kow-toxicity models were developed across six taxa groups that included QSARs for 5 of the broad and 13 of the specific MOAs. In this study, we demonstrate that QSARs based on MOAs can significantly increase LC50 prediction accuracy for specific acting chemicals. Prediction accuracy increases when QSARs are built based on highly specific MOAs, rather than broad MOA classifications. Additionally, we demonstrate that building QSAR models with chemicals in specific MOA groupings, rather than broader MOA groups leads to significantly better estimates. We also evaluated the differences between models developed from mass-based (µg/L) and mole-based (µmol/L) toxicity data and demonstrate that both are suitable for QSAR development with no clear trend in greater model accuracy. Overall, the results reveal that, despite high variance in all taxa and MOA groups, specific MOA-based models can improve the accuracy of aquatic toxicity predictions over more general groupings.Please check and confirm that the authors and their respective affiliations have been correctly identified and amend if necessary.The affiliations are correct. [ABSTRACT FROM AUTHOR]

The present work addresses the quantitative structure–antioxidant activity relationship in a series of 148 sulfur-containing alkylphenols, natural phenols, chromane, betulonic and betulinic acids, and 20-hydroxyecdysone using GUSAR2019 software. Statistically significant valid models were constructed to predict the parameter logk7, where k7 is the rate constant for the oxidation chain termination by the antioxidant molecule. These results can be used to search for new potentially effective antioxidants in virtual libraries and databases and adequately predict logk7 for test samples. A combination of MNA- and QNA-descriptors with three whole molecule descriptors (topological length, topological volume, and lipophilicity) was used to develop six statistically significant valid consensus QSPR models, which have a satisfactory accuracy in predicting logk7 for training and test set structures: R2TR > 0.6; Q2TR > 0.5; R2TS > 0.5. Our theoretical prediction of logk7 for antioxidants AO1 and AO2, based on consensus models agrees well with the experimental value of the measure in this paper. Thus, the descriptor calculation algorithms implemented in the GUSAR2019 software allowed us to model the kinetic parameters of the reactions underlying the liquid-phase oxidation of organic hydrocarbons. [ABSTRACT FROM AUTHOR]

COVID-19, whose etiological agent is the SARS-CoV-2 virus, has caused over 537.5 million cases and killed over 6.3 million people since its discovery in 2019. Despite the recent development of the first drugs indicated for treating people already infected, the great need to develop new anti-SARS-CoV-2 drugs still exists, mainly due to the possible emergence of new variants of this virus and resistant strains of the current variants. Thus, this work presents the results of QSAR and similarity search studies based only on 2D structures from a set of 32 bicycloproline derivatives, aiming to quickly, reproducibly, and reliably identify potentially useful compounds as scaffolds of new major protease inhibitors (Mpro) of the virus. The obtained QSAR model is based only on topological molecular descriptors. The model has good internal and external statistics, is robust, and does not present a chance correlation. This model was used as one of the tools to support the virtual screening stage carried out in the SwissADME web tool. Five molecules, from an initial set of 2695 molecules, proved to be the most promising, as they were within the model's applicability domain and linearity range, with low potential to cause carcinogenic, teratogenic, and reproductive toxicity effects and promising pharmacokinetic properties. These five compounds were then selected as the most competent to generate, in future studies, new anti-SARS-CoV-2 agents with drug-likeness properties suitable for use in therapy. [ABSTRACT FROM AUTHOR]