Search

The magnetic reconnection process relevant to that at the magnetotail is one of the research contents of the Space Plasma Environment Research Facility, which is under construction at the Harbin Institute of Technology in China. Two magnetic mirror sub-coils placed symmetrically in the vertical direction and connected in series cooperate with a dipole coil to generate a magnetic field environment similar to the Earth's magnetotail. A capacitor-based pulsed power supply (PPS) system with a modular design is developed to excite two magnetic mirror sub-coils to generate a magnetic field with a magnetic flux density of not less than 200 G at the center of the two sub-coils. The PPS should deliver a pulsed current with a peak of more than 8 kA, and the duration of the current not be less than 95% of the peak over 5 ms to two magnetic mirror sub-coils when the charging voltage is not less than 20 kV. In addition, the duration from the peak to 10% of the peak is not more than 130 ms. The detailed design of the PPS is discussed in this paper, and a test method is designed to reduce the risk of damage to the wires and the connection between the wires and the coaxial cables of the PPS when the PPS discharges at a higher charging voltage. Finally, the discharge test of the PPS is carried out to verify the design of the PPS. [ABSTRACT FROM AUTHOR]

The mechanism of acceleration, loss, and wave–particle interaction of energetic particles in the magnetosphere is a research content of the Space Plasma Environment Research Facility, which is being built as a user facility at the Harbin Institute of Technology in China. Two magnetic perturbation coils are used to simulate the magnetic storm distortion and excite Alfvén wave perturbation. A capacitor-based pulsed power supply (PPS) system with a modular design is developed to excite the magnetic perturbation coils to generate the required amplitude and duration of the magnetic field. The two magnetic perturbation coils are the CRDI coil and CRDII coil and are excited by one set of PPSs. The PPS for the CRDI coil consists of two modules and can provide a pulsed current of no less than 132 kA at 0.12 ms when the charging voltage is 20 kV, and the duration of the pulsed current from the peak to 10% of the peak is no more than 0.7 ms. The PPS for the CRDII coil consists of five modules and can provide a pulsed current of no less than 16 kA at 0.45, 0.65, 0.8, 0.95, and 1.1 ms, and the duration of the pulsed current from the peak to 10% of the peak is no more than 4.5 ms. The detailed design of the PPSs has been discussed in this paper, and the discharge test of the PPSs is carried out to verify the design of the PPSs. [ABSTRACT FROM AUTHOR]

3D asymmetric magnetic reconnection is an important investigation of the Space Plasma Environment Research Facility, which is being built as a user facility at the Harbin Institute of Technology in China. Four magnetosheath coils, which consist of Poloidal Field (labeled PF) coils and Toroidal Field (labeled TF) coils, are used to generate the magnetic field and plasma environment for the reconnecting experiment. A capacitor-based pulsed power supply (PPS) system with a modular design is developed to excite the magnetosheath coils to generate the required amplitude and duration of the magnetic field. The PPS system includes the PF PPS and TF PPS, which include four sets of PPSs, respectively. Each set of PF PPS and TF PPS consists of nine modules and four modules, respectively, and each module consists of a charge and discharge unit. The PF PPS can provide a pulsed current of no less than 360 kA for the corresponding PF coil at 0.11 ms when the charging voltage is 20 kV, and the duration of the pulsed current from the peak to 10% of the peak is no more than 0.6 ms. The TF PPS can provide a pulsed current of no less than 200 kA for the corresponding TF coil at 0.08 ms when the charging voltage is 20 kV, and the duration of the pulsed current from the peak to 10% of the peak is no more than 1.6 ms. The detailed design of the PPS has been discussed in this paper, and the detailed design of the main components in the discharge unit of the PPS is also given in this paper. Finally, the discharge tests of all the PPSs are carried out to verify the design of the PPSs, and the results of the PPSs in discharge tests indicate that all the PPSs meet the design requirements. [ABSTRACT FROM AUTHOR]

The Space Plasma Environment Research Facility currently under construction at the Harbin Institute of Technology in China uses four magnetosheath coils (flux cores) and a dipole coil to generate the magnetic field required for the study on the magnetopause magnetic reconnection. Two groups of magnetopause shape control coils (labeled CK coils) are used to slightly adjust the magnetic field distribution on the magnetopause. A capacitive pulsed power supply (PPS) system with a modular design is developed to excite CK coils. The PPS system consists of six sets of PPS with the same principle and structure, which are used to excite six sub-coils of the CK coils, respectively. Each set of PPS consists of ten modules and one local controller, and each module consists of a charger and discharge unit. Each set of PPS can provide a pulsed current of no less than 400 kA for the corresponding sub-coil at 0.11 ms when the charging voltage is 20 kV, and the duration of the pulsed current from the peak to 10% of the peak is no more than 0.6 ms. The detailed design of the PPS is discussed in this paper, and the discharge test of the PPS is carried out to verify the design of the PPS. Because there are acquisition and control devices in the discharge unit, the electromagnetic interference immunity design is also discussed to ensure the normal operation of the PPS. [ABSTRACT FROM AUTHOR]

The Space Plasma Environment Research Facility (SPERF) currently under construction at the Harbin Institute of Technology in China is a user facility dedicated to studying space plasma physics on the ground. A coil system of the SPERF consists of seven types of coils, which are used to generate the magnetic fields and plasma required by the physical experiments. A dipole coil of the coil system works with four magnetosheath coils (flux cores) to build the magnetic fields resembling that of the Earth and solar wind. A capacitor-based pulsed power supply (PPS) system with a modular design is developed to excite the dipole coil to generate a magnetosphere-like magnetic field required by the magnetopause magnetic reconnection experiment. The PPS of the dipole coil has a longer pulse duration and more energy than that of other coils in the coil system, it delivers a pulsed current with a peak of more than 18 kA, and the duration of the current is not less than 95% of the peak over 10 ms to the dipole coil when the charging voltage is not less than 20 kV. The detailed design of the PPS is discussed in this paper, and the discharge test of the PPS is carried out to verify the design of the PPS. [ABSTRACT FROM AUTHOR]

The capacitor-based pulsed power supply (PPS) system is an important subsystem of the Space Plasma Environment Research Facility being built as a user facility at Harbin Institute of Technology in China. It has been developed with a modular design to drive magnetic coils to generate magnetic fields and plasma for the physical experiments. In this paper, the modular design and component selection are proposed based on a calculation of parameter ranges of components and the number of modules followed by a simulation and an engineering test. Both the simulation and test results show the feasibility of the selected components and the number of modules to meet the designing requirements of the PPS. [ABSTRACT FROM AUTHOR]