Search

In this study, we explored the ability of wild-Serbian Ganoderma lucidum mycelial pellets (GLMPs) in treating synthetic domestic wastewater in a batch reactor under various operating conditions. The GLMPs produce non-hazardous by-products, are environmentally sustainable and able to produce in mass bulk with consistent quality. Riding on the highly efficient of treatment of industrial (textile) wastewater using GLMPs, similar high efficiency is foreseen for domestic wastewater as a green alternative treatment process. The optimal performance of GLMPs in similar synthetic domestic wastewater with a Carbon-to-Nitrogen (C/N) ratio of 16.7:1 was evaluated under three operational conditions. The C/N ratio was chosen based on the urban domestic wastewater characteristic during high peak flow with an initial Chemical Oxygen Demand (COD) of 533 mg/L and ammonia–nitrogen (NH3–N) content of 30 mg/L. The operational parameters of agitation speed (0 rpm, 25 rpm, 50 rpm, and 100 rpm), environmental temperature (25 °C, 30 °C, 35 °C, and 40 °C), and GLMP inoculum percentage (GIP) (0%, 0.25%, 0.50%, 0.75%, and 1.00%) were chosen for the experiment. In the experiment, the agitation speed of 100 rpm and the environmental temperature of 25 °C showed the best performance of the GLMPs within 15 h of retention time with a percentage removal of 92.9% for COD and 93.8% for NH3–N. Furthermore, a high volume of GIP in the batch reactor had an insignificant impact on the performance in the same concentration of wastewater, and 0.25% GIP was the volume used to treat the domestic wastewater.

The fluctuation of domestic wastewater characteristic inhibits the current conventional microbial-based treatment. The bioremediation fungi has received attention and reported to be an effective alternative to treat industrial wastewater. Similar efficient performance is envisaged for domestic wastewater whereby assessed performance of fungi for varying carbon-to-nitrogen ratios in domestic wastewater is crucial. Thus, the performance of pre-grown wild-Serbian Ganoderma lucidum mycelial pellets (GLMPs) was evaluated on four different synthetic domestic wastewaters under different conditions of initial pH (pH 4, 5, and 7) and chemical oxygen demand (COD) to nitrogen (COD/N) ratio of 3.6:1, 7.1:1, 14.2:1, and 17.8:1 (C3.6N1, C7.1N1, C14.2N1, and C17.8N1). The COD/N ratios with a constant concentration of ammonia–nitrogen (NH3–N) were chosen on the basis of the urban domestic wastewater characteristics sampled at the inlet basin of a sewage treatment plant (STP). The parameters of pH, COD, and NH3–N were measured periodically during the experiment. The wild-Serbian GLMPs efficiently removed the pollutants from the synthetic sewage. The COD/N ratio of C17.8N1 wastewater had the best COD and NH3–N removal, as compared to the lower COD/N ratio, and the shortest treatment time was obtained in an acidic environment at pH 4. The highest percentage for COD and NH3–N removal achieved was 96.0% and 93.2%, respectively. The results proved that the mycelium of GLMP has high potential in treating domestic wastewater, particularly at high organic content as a naturally sustainable bioremediation system.

The fungi-based technology, wild-Serbian Ganoderma lucidum (WSGL) as myco-alternative to existing conventional microbial-based wastewater treatment is introduced in this study as a potential alternative treatment. The mycoremediation is highly persistent for its capability to oxidatively breakdown pollutant substrates and widely researched for its medicinal properties. Utilizing the non-hazardous properties and high degradation performance of WSGL, this research aims to find optimum conditions and model the mycoremediation treatment design for Chemical Oxygen Demand (COD) and Ammonia Nitrogen (AN) removal in domestic wastewater via response surface methodology (RSM). Combined process variables were temperature (⁰C) (Model 1) and the volume of mycelial pellets (%) (Model 2) against treatment time (hour). Response variables for these two sets of central composite design (CCD) were the removal efficiencies of COD (%) and AN (%). The regression line fitted well with the data with R2 values of 0.9840 (Model 1-COD), 0.9477 (Model 1-AN), 0.9988 (Model 2-COD) and 0.9990 (Model 2-AN). The lack of fit test gives the highest value of Sum of Squares equal to 9494.91 (Model 1- COD), 9701.68 (Model 1-AN), 23786.55 (Model 2-COD) and 13357.02 (Model 2-AN), with probability F values less than 0.05 showing significant models. The optimum conditions were established corresponding to the percentage of COD and AN removal obtained were 95.1% and 96.3%, accordingly at the optimum temperature 25°C at the treatment time of 24 h, meanwhile 0.25% of mycelial pellet with 76.0% and 78.4% COD and AN removal, respectively. The high performance achieved demonstrates that the mycoremediation of G. lucidum is highly potential as part of the wastewater treatment system in treating domestic wastewater of high organic loadings.

The fungi-based technology, wild-Serbian Ganoderma lucidum (WSGL) as myco-alternative to existing conventional microbial-based wastewater treatment is introduced in this study as a potential alternative treatment. The mycoremediation is highly persistent for its capability to oxidatively breakdown pollutant substrates and widely researched for its medicinal properties. Utilizing the nonhazardous properties and high degradation performance of WSGL, this research aims to optimize mycoremediation treatment design for chemical oxygen demand (COD) and ammonia nitrogen (AN) removal in domestic wastewater based on proposed Model 1 (temperature and treatment time) and Model 2 (volume of pellet and treatment time) via response surface methodology (RSM). Combined process variables were temperature (0C) (Model 1) and the volume of mycelial pellets (%) (Model 2) against treatment time (hour). Response variables for these two sets of central composite design (CCD) were the removal efficiencies of COD (%) and AN (%). The regression line fitted well with the data with R2 values of 0.9840 (Model 1-COD), 0.9477 (Model 1-AN), 0.9988 (Model 2-COD), and 0.9990 (Model 2-AN). The lack of fit test gives the highest value of sum of squares equal to 9494.91 (Model 1-COD), 9701.68 (Model 1-AN), 23786.55 (Model 2-COD), and 13357.02 (Model 2-AN), with probability F values less than 0.05 showing significant models. The optimized temperature for Model 1 was at 25 °C within 24 h of treatment time with 95.1% COD and 96.3% AN removals. The optimized condition (temperature) in Model 1 was further studied in Model 2. The optimized volume of pellet for Model 2 was 0.25% in 24-h treatment time with 76.0% COD and 78.4% AN removals. Overall, the ascended sequence of high volume of pellet considered in Model 2 will slow down the degradation process. The best fit volume of pellet with maximum degradation of COD and AN is equivalent to 0.1% at 25 °C in 24 h. The high performance achieved demonstrates that the mycoremediation of G. lucidum is highly potential as part of the wastewater treatment system in treating domestic wastewater of high organic loadings.