Search

The present study investigated the impact of different loading approaches and microbial activity on the Natural Organic Matter (NOM) removal efficiency and capacity of ion exchange resins. Gaining further knowledge on the impact of loading approaches is of relevance because laboratory-scale multiple loading tests (MLTs) have been introduced as a simpler and faster alternative to column tests for predicting the performance of IEX, but only anecdotal evidence exists to support their ability to forecast contaminant removal and runtime until breakthrough of IEX systems. The overall trends observed for the removal and the time to breakthrough of organic material estimated using MLTs differed from those estimated using column tests. The results nonetheless suggest that MLTs could best be used as an effective tool to screen different ion exchange resins in terms of their ability to remove various contaminants of interest from different raw waters. The microbial activity was also observed to impact the removal and time to breakthrough. In the absence of regeneration, a microbial community rapidly established itself in ion exchange columns and contributed to the removal of organic material. Biological ion exchange (BIEX) removed more organic material and enabled operation beyond the point when the resin capacity would have otherwise been exhausted using conventional (i.e. in the absence of a microbial community) ion exchange. Furthermore, significantly greater removal of organic matter could be achieved with BIEX than biological activated carbon (BAC) (i.e. 56 ± 7% vs. 15 ± 5%, respectively) when operated at similar loading rates. The results suggest that for some raw waters, BIEX could replace BAC as the technology of choice for the removal of organic material.

A major drawback to ultrafiltration membrane operation for drinking water treatment is fouling, which results in lower water production and increased maintenance costs. The impact of different fouling mitigation strategies including, sparging conditions (duration and air flow rate) as well as phased in-line coagulation were investigated at pilot-scale. Unexpectedly, sparging during permeation and backwash resulted in a significantly higher rate of increase in irreversible resistance compared to Sparging only during backwash. Lower irreversible fouling observed without sparging during permeation was attributed to the formation of a protective layer on the membrane in the absence of sparging. Sparging at reduced air flow rates and intermittently, during the permeation cycle did not improve the irreversible resistance rate when compared to sparging only during backwash. The application of phased in-line coagulation to pre-coat membranes was also investigated. Coagulating for only the first half of the permeation cycle (phased coagulation) did not negatively impact membrane performance in terms of irreversible resistance and organics removal. Phased coagulation, which would lead to reduced coagulant and sludge disposal costs, appears to be a promising fouling control strategy.

The natural organic matter (NOM) removal efficiency and regeneration behavior of ion-exchange filters with promoted biological activity (BIEX) was compared to operation where biological activity was suppressed (i.e. abiotic conditions). The impact of BIEX pre-treatment on fouling in subsequent ultrafiltration was also investigated. Biological operation enhanced NOM removal by approximately 50% due to an additional degradation of smaller humic substances, building blocks and low molecular weight acids. Promotion of biological activity significantly increased the time to breakthrough of the filters and, therefore, is expected to lower the regeneration frequency as well as the amount of regenerate of which to dispose. Pre-treatment using BIEX filters resulted in a significant decrease in total and irreversible fouling during subsequent ultrafiltration. The decrease was attributed to the effective removal of medium and low molecular weight NOM fractions. The results indicate that BIEX filtration is a robust, affordable and easy-to-operate pre-treatment approach to minimize fouling in ultrafiltration systems and enhance the quality of the produced permeate.

Coagulation as pre-treatment to ultrafiltration (UF) was optimized for the removal of biopolymers, i.e., a primary UF foulant, for three different natural water matrices. The impact of pre-coagulation on membrane reversible and irreversible fouling, as well as the retention of organic micropollutants, was investigated at bench scale. Jar test experiments indicated that the optimum alum dosage for removal of biopolymers, based on a point of diminishing returns analysis, was relatively low (0.5 mg/L as coagulant; 0.05 mg/L as Al 3+ ). This dose was effective at reducing membrane reversible and irreversible fouling (up to 48%) for waters with higher concentrations of organics (>4 mg/L as DOC) over 24 h of permeation and backwash cycles. Biopolymers were identified as contributing to both reversible and irreversible fouling. The retention of organic micropollutants was relatively low for UF alone ( K ow > 2). This study demonstrates that a low dose of coagulant, optimized for biopolymer removal, may reduce membrane fouling and may provide value added for the retention of some organic micropollutants; however dosages depend on the specific water being treated, as well as treatment-related water quality targets.