Search

Typically, solar inverters curtail or “clip” the available power from the photovoltaic (PV) system when it exceeds the maximum ac capacity. This article discusses a battery system connected to the dc link of an inverter to recuperate this PV energy. Contrary to conventional approaches, which employ two dc–dc converters, one each for the battery and solar PV system, the proposed configuration utilizes a single dc–dc converter capable of simultaneously operating as a charge controller and a maximum power point tracking (MPPT) device. In addition to improving the overall system capacity factor, increasing the conversion efficiencies, and ensuring MPPT stability, the proposed configuration offers a simple solution for adding energy storage to existing PV installations. With this configuration, the excess power that will otherwise be curtailed due to inverter rating limitations is stored in the battery and supplied to the grid during periods of reduced irradiance. Moreover, a systematic methodology for sizing a dc-bus connected battery to minimize total PV energy curtailed was developed using an annual PV generation profile at the Louisville Gas and Electric and Kentucky Utilities E. W. Brown solar facility at Kentucky. The detailed behavior of the proposed system and its power electronics controls and operations were validated with case studies developed in PSCAD/EMTDC software for variable power generation and PV output power smoothing. [ABSTRACT FROM AUTHOR]

This paper analyzes the configuration, design, and operation of multi-MW grid connected solar photovoltaic (PV) systems with practical test cases provided by a 10-MW field development. In order to improve the capacity factor, the PV system operates at its maximum power point during periods of lower irradiance, and the power output is limited to a rated value at high irradiance. The proposed configuration also incorporates a utility scale battery energy storage system (BESS) connected to the grid through an independent inverter and benefits of the experience gained with a 1-MW 2-MWh BESS large demonstrator. The BESS power smoothing and frequency regulation capabilities are illustrated though combined theoretical and experimental studies. The behavior of the grid connected PV and BESS combined system is studied using a modified IEEE 14 bus test system implemented in PSCAD/EMTDC. This paper also includes a sizing exercise for energy storage in order to provide dispatchable PV power. [ABSTRACT FROM AUTHOR]