Search

This paper evaluates the parasitic currents that can occur in the structural part of some types of yokeless and segmented armature axial flux permanent magnet machines, where the frame-supporting stator floating teeth can originate stray paths. In this paper, these paths are defined and modeled, and the consequent effects (induced electro motive forces and currents) are estimated. The amount of these effects depends on the machine geometry, the magnetic circuit structure, and the winding layout. In this paper, the analysis is performed on two different rating machines, comparing their results. The model is validated by measurements on the corresponding prototypes. [ABSTRACT FROM AUTHOR]

In some topologies of yokeless and segmented armature (YASA) axial flux permanent-magnet (AFPM) machines, the particular frame structure required to fasten floating teeth can originate stray paths where parasitic currents may circulate. This paper investigates how the amplitude of these currents and the related additional Joule losses depend on the machine size. Reference is made to wind energy generators, rated from some tens of kilowatts up to a few megawatts. The developed model is mainly based on wind turbine basic data of vendor data sheets, and on the quantities evaluated and tested in two YASA AFPM prototypes, rated 50 and 200 kW. [ABSTRACT FROM PUBLISHER]

Due to the high torque capability, axial flux (AF) permanent-magnet (PM) machines are an interesting solution for direct driven wind energy conversion systems and low-speed motors. However, the structure of such machines makes them sensitive to geometrical imperfections due to manufacturing process. This paper analyzes the effects that various types of geometrical imperfections produce in concentrated coil AF PM generators. In particular, a case study is presented, where the mechanical stresses, the resulting axial force, and the bending torques on the shaft, as well as the circulation current in the winding parallel paths, are calculated. The results obtained by means of an analytical approach are compared with those based on finite element method simulations and are validated by some experimental results on a prototype. [ABSTRACT FROM PUBLISHER]

Some design and operation aspects of axial flux permanent magnet synchronous machines, wound with concentrated coils, are presented. Due to their high number of poles, compactness, and excellent waveform quality and efficiency, these machines show satisfactory operation at low speeds, both as direct drive generators and as motors. In this paper, after a general analysis of the model and design features of this kind of machine, the attention is focused on wind power generation: The main sizing equations are defined, and the most relevant figures of merit are examined by means of a suitable parametric analysis. Some experimental results obtained by testing a three-phase, 50-kW, and 70-rpm prototype are presented and discussed, validating the modeling theory and the design procedure. [ABSTRACT FROM AUTHOR]