Search

When studying the behavior of a field programmable gate array (FPGA) under radiation, the most commonly used methodology consists in evaluating the single-event effect (SEE) cross section of its elements individually. However, this method does not allow the estimation of the device failure rate when using a custom design. An alternative approach based on benchmark circuits is presented in this article. It allows standardized application-level testing, which makes the comparison between different FPGAs easier. Moreover, it allows the evaluation of the FPGA failure rate independent of the application that will be implemented. The employed benchmark circuit belongs to the ITC’99 benchmark suite developed at Politecnico di Torino. Using the proposed methodology, the response of four FPGAs—the NG-Medium, the ProASIC3, the SmartFusion2, and the PolarFire—was evaluated under high-energy protons. Radiation tests with thermal neutrons were also conducted on the PolarFire to assess its potential sensitivity to them. Moreover, its performances in terms of total ionizing dose (TID) effects have been evaluated by measuring the degradation of the propagation delay during irradiation. [ABSTRACT FROM AUTHOR]

Functional verification schemes at a level different from component-level testing are emerging as a cost-effective tool for those space systems for which the risk associated with a lower level of assurance can be accepted. Despite the promising potential, system-level radiation testing can be applied to the functional verification of systems under restricted intrinsic boundaries. Most of them are related to the use of hadrons as opposed to heavy ions. Hadrons are preferred for the irradiation of any bulky system, in general, because of their deeper penetration capabilities. General guidelines about the test preparation and procedure for a high-level radiation test are provided to allow understanding which information can be extracted from these kinds of functional verification schemes in order to compare them with the reliability and availability requirements. The use of a general scaling factor for the observed high-level cross sections allows converting test cross sections into orbit rates. [ABSTRACT FROM AUTHOR]

Optoelectronic components are the most sensitive devices of systems exposed to radiation environments. Displacement damage (DD) effects can severely degrade the performances of such devices, which are extensively used in critical electronic systems installed in particle accelerators or nuclear power plants. This work investigates the use of application-specific radiation spectra for damage estimations in operation instead of mono-energetic proton or neutron irradiations. An analysis of the characteristics of the Large Hadron Collider (LHC) radiation environment in terms of DD is presented in this work along with the demonstration of the ability of the CERN High Energy Accelerator Mixed Field (CHARM) facility of CERN to reproduce them. Then, a set of optocouplers made of gallium arsenide (GaAs), indium gallium arsenide (InGaAs), and aluminum gallium arsenide (AlGaAs) are tested under these environments, and the results are compared to proton and neutron irradiations. [ABSTRACT FROM AUTHOR]