Search

The Target Station at the European Spallation Source (ESS) is designed to convert high power proton beam to high brightness neutron beams, for studying fundamental properties of materials. Upon commissioning of the 'beam on target' planned in 2022, the ESS linac will deliver lower energy proton beam than the design value of 2 GeV, for neutron production. The beam energy will then be gradually ramped up, with the sequential commissioning of the downstream part of the superconducting cryomodules. During neutron production, the beam intercepting devices and moderators are exposed to intense flux of primary and secondary particles, suffering from radiation induced structural degradation. The extent of the radiation damage depends on the energy and intensity of the impinging protons. Currently, the lifetime criteria determined for these components are based on the 2 GeV beam energy. To secure availability and reliability of the neutron production during the beam energy ramp-up phase, the radiation damage rates in these components should be reassessed and the lifetime criteria be adjusted. In this paper, we present the lifetime criteria for the beam intercepting devices and moderators for different beam energies, to serve for the planning of the maintenance and replacement schedule during the proton energy ramp-up phase. [ABSTRACT FROM AUTHOR]

VENUS is an imaging instrument that will use a broad range of neutron wavelengths, from epithermal to cold, will include enhanced contrast mechanisms, and will offer novel energy-selective imaging techniques that directly connect the structures, properties, and function of complex engineering materials and systems to reveal practical and fundamental answers about their real-world performance. The instrument is to be built at SNS beam line 10 and will face the decoupled poisoned hydrogen moderator. The driving cost for the instrument is the beam line and instrument cave shielding. Initial scoping analyses were performed to estimate thickness and composition of shielding materials for the instrument cave and beam line. In light of the upcoming Proton Power Upgrade (PPU) project, these transport analyses were performed for proton beam on target at 1.3 GeV and 2 MW. [ABSTRACT FROM AUTHOR]

The general control system (GCS) in the Materials and Life Science Experimental Facility (MLF) at the Japan Proton Accelerator Research Complex (J-PARC) has a data storage (DS) server that stores operational data on the status of neutron and muon targets in the MLF. It has worked well to detect unusual situations around these target stations and to investigate the causes of accidents by checking data in the DS server for short-term operations. To pick up potential abnormalities in the slight state transitions from the target stations, however, it is necessary to introduce an abnormality sign determination system (ASDS). This ASDS requires an integral data storage (IDS) server that stores various operational data throughout the proton beams, target stations, and secondary beams for long-term operations because it judges potential abnormalities by using algorithms based on analysis of these data. This report describes a present status of the GCS, a conceptual design for the ASDS, and the installation of the IDS server. [ABSTRACT FROM AUTHOR]

The neutron Time-Of-Flight (n_TOF) facility at the European Laboratory for Particle Physics (CERN) is a pulsed white-spectrum neutron spallation source producing neutrons for two experimental areas: EAR1, located 185 m downstream of the spallation target, and EAR2, located 20 m above the target. The facility is based on a lead target impacted by a high-intensity 20 GeV/c proton beam. It is designed to study neutron-nucleus interactions for neutron kinetic energies from a few meV to several GeV, with applications in nuclear astrophysics, nuclear technology, and medical research. The facility is undergoing a major upgrade in 2019–2020, which will include the installation of the new third-generation target. The second-generation target consists in a water-cooled lead cylinder, while the new target will be cooled by nitrogen to avoid erosion-corrosion phenomena and contamination of the cooling water with radioactive lead spallation products. The new design will be optimized also for the vertical flight path. The operation of the new spallation target will start in 2021. This paper presents an overview on the evolution of the design and on the related R&D activities (including beam irradiation tests) carried out to ensure the best performance for both experimental areas and avoid the contamination issues of the previous targets. [ABSTRACT FROM AUTHOR]