Search

Currently, about two thirds of all new macromolecular structures are determined by molecular replacement. In general the method works reliably, but it reaches its limits when the search model differs too much from the target structure in terms of coordinate deviations or completeness. Since anomalously scattering substructures are better conserved than the overall structure, these substructures and the corresponding anomalous intensity differences can be utilized to enhance the performance of molecular-replacement approaches. It is demonstrated that the combined and concomitant use of structure-factor amplitudes and anomalous differences constitutes a promising approach to push the limits of molecular replacement and to make more structures amenable to structure solution by this technique.

Currently, selenium is the most widely used phasing vehicle for experimental phasing, either by single anomalous scattering or multiple-wavelength anomalous dispersion (MAD) procedures. The use of the single isomorphous replacement anomalous scattering (SIRAS) phasing procedure with selenomethionine containing proteins is not so commonly used, as it requires isomorphous native data. Here it is demonstrated that isomorphous differences can be measured from intensity changes measured from a selenium labelled protein crystal before and after UV exposure. These can be coupled with the anomalous signal from the dataset collected at the selenium absorption edge to obtain SIRAS phases in a UV-RIPAS phasing experiment. The phasing procedure for two selenomethionine proteins, the feruloyl esterase module of xylanase 10B from Clostridium thermocellum and the Mycobacterium tuberculosis chorismate synthase, have been investigated using datasets collected near the absorption edge of selenium before and after UV radiation. The utility of UV radiation in measuring radiation damage data for isomorphous differences is highlighted and it is shown that, after such measurements, the UV-RIPAS procedure yields comparable phase sets with those obtained from the conventional MAD procedure. The results presented are encouraging for the development of alternative phasing approaches for selenomethionine proteins in difficult cases.

Structural proteomics (SP) projects are capable of producing thousands of protein structures per year by employing semi-automated technologies. It is too early to assess and evaluate the scientific impact of these protein structures, although SP initiatives have substantially changed the traditional way of protein characterization. Many of the methodologies and technologies developed by SP have been adapted by structural biology laboratories and pharmaceutical companies to lower the costs, increase the speed and productivity of structure determination pipelines and to enhance drug discovery programs. The advent of genomic and proteomic technologies have facilitated rapid advances in our understanding of the molecular details of cellular function. The purpose of this review is to consider the impact of these technologies on protein structure analysis and to illustrate how it's directing the focus of research relevant to biotechnology.

A combination of molecular replacement and single-wavelength anomalous diffraction phasing has been incorporated into the automated structure-determination platform Auto-Rickshaw. The complete MRSAD procedure includes molecular replacement, model refinement, experimental phasing, phase improvement and automated model building. The improvement over the standard SAD or MR approaches is illustrated by ten test cases taken from the JCSG diffraction data-set database. Poor MR or SAD phases with phase errors larger than 70 degrees can be improved using the described procedure and a large fraction of the model can be determined in a purely automatic manner from X-ray data extending to better than 2.6 A resolution.

The sequence infrastructure that has arisen through large-scale genomic projects dedicated to protein analysis, has provided a wealth of information and brought together scientists and institutions from all over the world. As a consequence, the development of novel technologies and methodologies in proteomics research is helping to unravel the biochemical and physiological mechanisms of complex multivariate diseases at both a functional and molecular level. In the late sixties, when X-ray crystallography had just been established, the idea of determining protein structure on an almost universal basis was akin to an impossible dream or a miracle. Yet only forty years after, automated protein structure determination platforms have been established. The widespread use of robotics in protein crystallography has had a huge impact at every stage of the pipeline from protein cloning, over-expression, purification, crystallization, data collection, structure solution, refinement, validation and data management- all of which have become more or less automated with minimal human intervention necessary. Here, recent advances in protein crystal structure analysis in the context of structural genomics will be discussed. In addition, this review aims to give an overview of recent developments in high throughput instrumentation, and technologies and strategies to accelerate protein structure/function analysis.

23 different crystal forms of 19 different biological macromolecules were examined with respect to their anomalously scattering substructures using diffraction data collected at a wavelength of 2.0 A (6.2 keV). In more than 90% of the cases the substructure was found to contain more than just the protein S atoms. The data presented suggest that chloride, sulfate, phosphate or metal ions from the buffer or even from the purification protocol are frequently bound to the protein molecule and that these ions are often overlooked, especially if they are not bound at full occupancy. Thus, in order to fully describe the macromolecule under study, it seems desirable that any structure determination be complemented with a long-wavelength data set.

The Zn inactive class of glyoxalase I (Glo1) metalloenzymes are typically homodimeric with two metal-dependent active sites. While the two active sites share identical amino acid composition, this class of enzyme is optimally active with only one metal per homodimer. We have determined the X-ray crystal structure of GloA2, a Zn inactive Glo1 enzyme from Pseudomonas aeruginosa. The presented structures exhibit an unprecedented metal-binding arrangement consistent with half-of-sites activity: one active site contains a single activating Ni2+ ion, whereas the other contains two inactivating Zn2+ ions. Enzymological experiments prompted by the binuclear Zn2+ site identified a novel catalytic property of GloA2. The enzyme can function as a Zn2+/Co2+-dependent hydrolase, in addition to its previously determined glyoxalase I activity. The presented findings demonstrate that GloA2 can accommodate two distinct metal-binding arrangements simultaneously, each of which catalyzes a different reaction. [ABSTRACT FROM AUTHOR]

Members of the WXG100 protein superfamily form homo- or heterodimeric complexes. The most studied proteins among them are the secreted T-cell antigens CFP-10 (10 kDa culture filtrate protein, EsxB) and ESAT-6 (6 kDa early secreted antigen target, EsxA) from Mycobacterium tuberculosis. They are encoded on an operon within a gene cluster, named as ESX-1, that encodes for the Type VII secretion system (T7SS). WXG100 proteins are secreted in a full-length form and it is known that they adopt a four-helix bundle structure. In the current work we discuss the evolutionary relationship between the homo- and heterodimeric WXG100 proteins, the basis of the oligomeric state and the key structural features of the conserved sequence pattern of WXG100 proteins. We performed an iterative bioinformatics analysis of the WXG100 protein superfamily and correlated this with the atomic structures of the representative WXG100 proteins. We find, firstly, that the WXG100 protein superfamily consists of three subfamilies: CFP-10-, ESAT-6- and sagEsxA-like proteins (EsxA proteins similar to that of Streptococcus agalactiae). Secondly, that the heterodimeric complexes probably evolved from a homodimeric precursor. Thirdly, that the genes of hetero-dimeric WXG100 proteins are always encoded in bi-cistronic operons and finally, by combining the sequence alignments with the X-ray data we identify a conserved C-terminal sequence pattern. The side chains of these conserved residues decorate the same side of the C-terminal α-helix and therefore form a distinct surface. Our results lead to a putatively extended T7SS secretion signal which combines two reported T7SS recognition characteristics: Firstly that the T7SS secretion signal is localized at the C-terminus of T7SS substrates and secondly that the conserved residues YxxxD/E are essential for T7SS activity. Furthermore, we propose that the specific α-helical surface formed by the conserved sequence pattern including YxxxD/E motif is a key component of T7SS-substrate recognition. [ABSTRACT FROM AUTHOR]

The article discusses a research study on the phasing of selenomethionine-containing proteins with single isomorphous replacement through the use of inhouse ultraviolet (UV)-induced radiation damage. Experimental procedure include the use of three selenium-labelled proteins, simulation of protein crystal penetration depths and measurement UV absorption spectrum with the data collected on European Synchrotron Radiation Facility (ESRF). Conclusions indicated that UV can bring changes to protein crystals more than X-ray.

Coronaviruses are a family of positive-stranded RNA viruses that includes important pathogens of humans and other animals. The large coronavirus genome (26-31 kb) encodes 15-16 nonstructural proteins (nsps) that are derived from two replicase polyproteins by autoproteolytic processing. The nsps assemble into the viral replication-transcription complex and nsp3, nsp4 and nsp6 are believed to anchor this enzyme complex to modified intracellular membranes. The largest part of the coronavirus nsp4 subunit is hydrophobic and is predicted to be embedded in the membranes. In this report, a conserved C-terminal domain (~100 amino-acid residues) has been delineated that is predicted to face the cytoplasm and has been isolated as a soluble domain using library-based construct screening. A prototypical crystal structure at 2.8 Å resolution was obtained using nsp4 from feline coronavirus. Unmodified and SeMet-substituted proteins were crystallized under similar conditions, resulting in tetragonal crystals that belonged to space group P43. The phase problem was initially solved by single isomorphous replacement with anomalous scattering (SIRAS), followed by molecular replacement using a SIRAS-derived composite model. The structure consists of a single domain with a predominantly α-helical content displaying a unique fold that could be engaged in protein-protein interactions. [ABSTRACT FROM AUTHOR]

The article discusses the impact of genomic and proteomic technologies on protein structure analysis and its implication on researches relevant to biotechnology. It cites that structural proteomics (SP) projects profoundly impacts structural biology with its recent advances in high-throughput methods and technologies, which are focused on solving novel protein structures, regarded as an important analytical tool in biochemical research. It notes that these advances in SP technologies will likely continue to impact all fields of biological sciences.

Five experiments have been designed to be used for teaching macromolecular crystallography. The three proteins used in this tutorial are all commercially available; they can be easily and reproducibly crystallized and mounted for diffraction data collection. For each of the five experiments the raw images and the processed data of a sample diffraction data set as well as the refined coordinates and phases are provided for teaching the steps of data processing and structure determination. [ABSTRACT FROM AUTHOR]

Crystal structure determination of catabolite control protein A (CcpA) at 2.6 Å resolution reveals for the first time the structure of a full-length apo-form LacI-GalR family repressor protein. In the crystal structures of these transcription regulators, the three-helix bundle of the DNA-binding domain has only been observed in cognate DNA complexes; it has not been observed in other crystal structures owing to its mobility. In the crystal packing of apo-CcpA, the protein–protein contacts between the N-terminal three-helix bundle and the core domain consisted of interactions between the homodimers that were similar to those between the corepressor protein HPr and the CcpA N-subdomain in the ternary DNA complex. In contrast to the DNA complex, the apo-CcpA structure reveals large subdomain movements in the core, resulting in a complete loss of contacts between the N-subdomains of the homodimer. [ABSTRACT FROM AUTHOR]

The NtrC family of proteins senses external stimuli and accordingly stimulates stress and virulence pathways via activation of associated σ54-dependent RNA polymerases. However, the structural determinants that mediate this activation are not well understood. Here, we establish using computational, structural, biochemical, and biophysical studies that MopR, an NtrC protein, harbors a dynamic bidirectional electrostatic network that connects the phenol pocket to two distal regions, namely the "G-hinge" and the "allosteric linker." While the G-hinge influences the entry of phenol into the pocket, the allosteric linker passes the signal to the downstream ATPase domain. We show that phenol binding induces a rewiring of the electrostatic connections by eliciting dynamic allostery and demonstrates that perturbation of the core relay residues results in a complete loss of ATPase stimulation. Furthermore, we found a mutation of the G-hinge, ~20 Å from the phenol pocket, promotes altered flexibility by shifting the pattern of conformational states accessed, leading to a protein with 7-fold enhanced phenol binding ability and enhanced transcriptional activation. Finally, we conducted a global analysis that illustrates that dynamic allostery-driven conserved community networks are universal and evolutionarily conserved across species. Taken together, these results provide insights into the mechanisms of dynamic allostery-mediated conformational changes in NtrC sensor proteins. [ABSTRACT FROM AUTHOR]

Summary: Profilins are key regulators of actin dynamics. They sequester actin monomers, forming a pool for rapid polymer formation stimulated by proteins such as formins. Apicomplexan parasites utilize a highly specialized microfilament system for motility and host cell invasion. Their genomes encode only a small number of divergent actin regulators. We present the first crystal structure of an apicomplexan profilin, that of the malaria parasite Plasmodium falciparum, alone and in complex with a polyproline ligand peptide. The most striking feature of Plasmodium profilin is a unique minidomain consisting of a large β-hairpin extension common to all apicomplexan parasites, and an acidic loop specific for Plasmodium species. Reverse genetics in the rodent malaria model, Plasmodium berghei, suggests that profilin is essential for the invasive blood stages of the parasite. Together, our data establish the structural basis for understanding the functions of profilin in the malaria parasite. [Copyright &y& Elsevier]