Search

Detailed analyses of a late-phase melt progression in the advanced power reactor (APR)1400 were completed to identify the melt and the thermal-hydraulic states of the in-vessel materials in the reactor vessel lower plenum at the time of reactor vessel failure to evaluate the candidate strategies for an in-vessel corium retention (IVR). Initiating events considered included high-pressure transients of a total loss of feed water (LOFW) and a station blackout (SBO) and low-pressure transients of a 0.0009-m² small, 0.0093-m² medium, and 0.0465-m² large-break loss-of-coolant accident (LOCA) without safety injection. Best-estimate simulations for these low-probability events with conservative accident progression assumptions that lead to reactor vessel failure were performed by using the SCDAP/RELAP5/MOD3.3 computer code. The SCDAP/RELAP5/MOD3.3 results have shown that the pressurizer surge line failed before the reactor vessel failure, which results in a rapid decrease of the in-vessel pressure and a delay of the reactor vessel failure time of ∼40 rain in the high-pressure sequences of the total LOFW and the SBO transients. In all the sequences, ∼80 to 90% of the core material was melted and relocated to the lower plenum of the reactor vessel at the time of reactor vessel failure. The maximum value of the volumetric heat source in the corium pool was estimated as 1.9 to 3.7 MW/m³. The corium temperature was ∼2800 to 3400 K at the time of reactor vessel failure. The highest volumetric heat source sequence is predicted for the 0.0465-m² large-break LOCA without safety injection in the APR1400, because this sequence leads to an early reactor vessel failure. [ABSTRACT FROM AUTHOR]

In-vessel retention (IVR) of core melt that may relocate to the lower head of a reactor vessel is a key severe accident management strategy adopted by some operating nuclear power plants and proposed for several advanced light water reactors. A U.S.-Korean International Nuclear Energy Research Initiative project has been initiated to explore design enhancements that could increase the margin for IVR for advanced reactors with higher power levels [up to 1500 MW(electric)]. As part of this effort, an enhanced in-vessel core catcher is being designed and evaluated. To reduce cost and simplify manufacture and installation, this new core catcher design consists of several interlocking sections that are machined to fit together when inserted into the lower head. If needed, the core catcher can be manufactured with holes to accommodate lower head penetrations. Each section of the core catcher consists of two material layers with an option to add a third layer (if deemed necessary). The first is a base material that has the capability to support and contain the mass of core materials that may relocate during a severe accident; the second is an oxide coating on top of the base material, which resists interactions with high-temperature core materials; and the third is an optional coating on the bottom side of the base material to protect it from oxidation during the lifetime of the reactor. This paper summarizes results from the in-vessel core catcher design and evaluation efforts, focusing on recently obtained results from materials interaction tests and prototypic testing activities. [ABSTRACT FROM AUTHOR]