Search

To relieve the overwhelming pressure on fossil energy, aqueous magnesium ion batteries attracted tremendous attention owing to their low cost and high safety. However, the cathode materials are apt to occur lattice distortion because of the electrostatic interaction between magnesium ions and crystal. The 2×2 manganese octahedral molecular sieve with potassium ions and water located in the tunnels (K‐OMS‐2), utilized as a cathode material for chargeable magnesium ions batteries, is exposed to irreversible Mg2+ intercalation/deintercalation due to lattice distortion, which heavily damages the electrochemical properties and declines the capacity. Herein, we carry out an ion doping strategy to overcome the above issues, leading to an enhanced Mg Mg2+ storage behavior. The Nb or V cation is successfully doped into K‐OMS‐2 by a facile reflux method under room temperature. The specific surface area is enlarged by the addition of cations, which promise a large electrode‐electrolyte contact area. The Nb and V doped K‐OMS‐2 present a capacity of 252.6 and 265.9 mAh/g at 20 mA/g, respectively. This work demonstrates an ion doping approach toward exploiting the stable and high‐capacity Mg‐ion battery cathode and provides potential cathode materials for a large‐scale aqueous Mg‐ion‐based energy storage system. [ABSTRACT FROM AUTHOR]

Potassium ion batteries or capacitors are a promising technology for large-scale energy storage due to the abundant resource and low cost of potassium. However, the development of stable electrode materials with high capacity, capable rate ability, and excellent cycling stability remains a challenge. Herein, carbon dots modified reduced graphene oxides (LAP-rGO-CDs) are designed and synthesized via a rapid and green microwave-assisted method with l -Ascorbic acid 6-palmitate (LAP) as the reducing agent. LAP-rGO-CDs present enlarged interlayer spacing and faster ion transfer rate owing to the introducing of carbon dots. Serving as a potassium ion battery electrode, LAP-rGO-CDs showed a high specific capacity of 299 mAh g−1 at 1 A g−1 and excellent cycling stability. Moreover, a LAP-rGO-CDs//AC full carbon-based potassium ion capacitor is assembled and displays a maximum energy density of 119 Wh kg−1 and a power density of 5352 W kg−1. This work demonstrates the potential application of LAP-rGO-CDs for high-performance potassium ion storage. [Display omitted] [ABSTRACT FROM AUTHOR]

• Three F-doped biomass carbon were prepared by combining PTFE, DAST, HF and hemp. • The fluorinated products showed unexpected morphology and structure. • Products (by PTFE) exhibit the best capacity, rate capability, and lifetime in PIBs. • A lot of defects and high heteroatom content are key merits. Heteroatom doping can effectively improve the electrochemical activity of carbon materials. In this paper, three kinds of fluorine-doped biomass carbon are synthesized using industrial hemp core as the precursor and Poly tetra fluoroethylene (PTFE), Diethylaminosulphur trifluoride (DAST) and Hydrofluoric acid (HF) as fluorinating agents, respectively. Among them, the PTFE-treated biomass carbon (PTFE-CHEMP) is wrapped by fluorine-containing nanotubes, which has the most defects, the most F doping amount and the optimum pore size, and is beneficial to the adsorption of K +. When used as the anode of potassium ion batteries (PIBs), the PTFE-CHEMP electrode can provide an average reversible capacity of 369.6 mAh g−1 (200 mA g−1) in 500 cycles. Even at a high current of 2000 mA g−1, it can still provide an excellent rate capability of 229.3 mAh g−1. Kinetic analysis verify that its excellent rate performance comes from the K + storage mechanism dominated by surface-driven behavior. In addition, the constant current intermittent titration technique (GITT) shows that it still has the storage capacity for K + at high potentials. This work not only provides a reference for subsequent research on fluorine-doped biomass carbon, but also provides a potential solution for the production of low-cost, high-capacity PIBs anodes. [Display omitted] [ABSTRACT FROM AUTHOR]

[Display omitted] • Nitrogen-rich biomass carbon (N-CHC) was prepared by urea etching method. • N-CHC exhibits excellent capacity and rate performance as a K+ half-cell anode. • Large specific surface area, lots of defects and heteroatoms are key advantages. • The hybrid capacitor composed of N-CHC and AC exhibits high energy and power density. Potassium ion hybrid capacitors have the advantages of high energy density, high power density, and low cost, and are expected to replace expensive lithium ion storage devices in large-scale applications. Here, an innovative nitrogen-rich biomass carbon (N-CHC) is prepared using urea as the etchant and hemp core as the raw material, which has a high specific surface area of 1185.3 m2 g−1 and nitrogen content of 8.56%. In addition, it shows a capacity of 442.4 mAh g−1 as a potassium ion half-cell anode at 30 mA g−1. Even under the high current test of 2000 mA g−1, N-CHC also shows excellent performance (175.0 mAh g−1). Further, the good rate performance is attributed to the large-scale capacitance control by analyzing reaction process kinetics. And the constant current intermittent titration technique (GITT) results show that N-CHC has a larger K+ diffusion coefficient than unetched biomass carbon. The maximum energy density of the full carbon-based hybrid capacitor composed of N-CHC anode and activated carbon cathode is 127.36 Wh kg−1, and the maximum power density is 2371 W kg−1. [ABSTRACT FROM AUTHOR]

• Sulfur-doped hemp-derived carbon is used in PIBs high-performance anodes. • It exhibits a higher capacity and better rate capability at 60 °C than at 25 °C. • Bonded sulfur is awakened at high temperature to enhance the adsorption of K +. • High temp promotes the decomposition of electrolyte is the main cause of danger. • The full cell composed of PTCDA exhibits excellent capacity at 60 °C. Potassium-ion batteries (PIBs) have huge advantages in terms of price and resource abundance, and are ideal substitutes for lithium-ion batteries (LIBs), but there is currently little research on their high-temperature fields. In this work, the sulfur-doped biomass carbon (CHP/S) is synthesized from biomass hemp stalks as the carbon source and sulfur powder as the sulfur source, with a high sulfur content of 18.6%. Sulfur mainly exist in the form of bonded sulfur (S-C, S-O) and have quite favorable stability. As a PIBs anode, it exhibits a specific capacity of 589 mAh g−1 (30 mA g−1) at 60 °C, which is 1.5 times the capacity at 25 °C. Electrochemical analysis and kinetic analysis indicate that the increased capacity mainly comes from the "arousal effect" of sulfur under high temperature conditions, and an increased temperature has a positive effect on the absorption and desorption performance of the material. In addition, the full cell assembled with Perylene-3, 4, 9, 10-tetracarboxylic dianhydride (PTCDA) cathode shows greater capacity (~80 mAh g−1) at 60 °C than at 25 °C. Unfortunately, the electrolyte decomposition problem caused by high temperature is easily dangerous. The result is of great significance to the research of high-temperature PIBs. Image, graphical abstract [ABSTRACT FROM AUTHOR]