Search

Background: Medical devices such as perfusion materials in polyvinyl chloride may contain di(2-ethylhexyl)phthalate (DEHP). Several studies have questioned the harmlessness of phthalates, which have been shown to have toxic effects on the reproductive system and general development. This study was designed to assess DEHP exposure in infants and children benefitting from cyclic parenteral nutrition (PN). The results are compared with those obtained from children used as controls and receiving no PN, to estimate the potential risk to this pediatric population, taking into account exposure levels and already published data., Methods: Plasmatic concentrations of DEHP were assessed by high-performance liquid chromatography from blood samples taken from 22 children at the start and finish of a 12-hour cyclic PN period and compared with those obtained from 20 control children of comparable age and gender., Results: After a 12-hour cyclic PN period, DEHP migration varied widely among the patients. The concentrations were not quantifiable in 4 children at the start of PN. In 1 child, they were quantifiable neither at the start nor at the end of PN. However, for 17 children, DEHP concentrations were quantifiable at the start of PN and were very variable from one child to another. At the end, DEHP concentrations had significantly but variably increased in these children. No trace of DEHP was found in the blood samples from 20 healthy controls., Conclusion: Considering published data on phthalate toxicity, it would appear advisable to encourage the use of medical devices that are either phthalate or DEHP free.

The use of medical devices containing highly criticized phthalates including di(2-ethylhexyl) phthalate (DEHP) has been challenged by European directive 2007/47/CE, put into effect in March 2010. New plasticizers are now being used to soften PVC in medical devices: trioctyltrimellitate (TOTM), di-isononyl-cyclohexan-1,2-dicarboxilate (DINCH) and di(2-ethylhexyl) terephthalate (DEHT). To quantify DEHP in nine DEHP-free medical devices made of PVC softened by alternative plasticizers, high performance liquid chromatography analysis with ultraviolet detection at 220 nm wavelength was achieved. An NMR spectroscopy was performed to confirm DEHP presence. Only two medical devices out of the nine tested were truly without DEHP. One of them showed traces of DEHP exceeding the threshold contamination of 0.1% in plastic mass set by REACH regulations. TOTM plasticizer is still incriminated when polyvinyl-chloride (PVC) is contaminated with DEHP. Manufacturers must verify the purity of their raw material, not only on PVC, but also on other soft plastics entering into the composition of medical infusion devices. The clinical consequences of exposure to certain levels of DEHP have not been evaluated. A solution could be to use alternative PVC-free materials., (Copyright © 2011 Elsevier B.V. All rights reserved.)

The stability and compatibility of 5-fluorouracil (5-FU) in undiluted or diluted admixtures stored in beta-radiation sterilized portable poly(vinyl chloride) (PVC) infusion bags were investigated. Admixtures containing 5-FU 50 mg ml(-1) not diluted or 25 mg ml(-1) diluted in 0.9% sodium chloride injection were placed in 100 or 250 ml empty PVC reservoirs sterilized initially by beta-irradiation. They were protected from light and placed at 37 degrees C. Two ml quantities were withdrawn immediately after preparation and after storage for 1, 2, 3, 4, 5, 6, 7 and 14 days. For each condition, samples from each admixture were tested for drug concentration by stability-indicating high-performance liquid chromatography. The admixtures were also monitored for precipitation, color change and pH. Evaporative water loss from the containers was also measured. 5-FU was compatible with PVC containers in all tested conditions for 14 days. No loss of drug and no color change were detected throughout the storage period. pH values were stable and neither precipitation nor loss of water through the reservoirs was observed when drug 50 or 25 mg ml(-1) (diluted using 0.9% sodium chloride) was stored in 100 ml capacity polyvinyl PVC bags. However, when stored in 250 ml capacity PVC bags, the 5-FU solution showed precipitation after 13 and 14 days of storage, but no drug loss was detected due to a substantial loss of water. The precipitation of the drug was due to the decrease of pH induced by the dehydrochlorination of PVC during beta-irradiation leading to the formation of hydrochloric acid in solution. Differences observed between 100 and 250 ml capacity bags can be explained by the greater area of PVC present in 250 ml reservoirs, and consequently more HCl formed. Finally, more plasticizer, di-(2-ethylhexyl) phthalate (DEHP), was then detected in drug solutions stored in 250 ml PVC bags. So, we recommend the use of 100 ml bags to store 5-FU at longer storage times and higher temperatures.

The stability and compatibility of fotemustine, a nitrosourea anticancer agent, in 5% dextrose solution with polyvinyl chloride (PVC) containers and administration sets were studied under different conditions of temperature and light. The drug was diluted to 0.8 and 2 mg ml(-1) in 100 or 250 ml 5% dextrose injection solutions for 1-h simulated infusions using PVC bags and administration sets with protection from light. After preparation in the PVC bags containing 5% dextrose, fotemustine was also prepared at the same concentrations and stored at 4 degrees C for 48 h and at room temperature (22 degrees C) or at sunray exposure ( > 30 degrees C) over 8 h with or without protection from light. The solution samples were removed immediately at various time points of simulated infusions and storage, and stored at -20 degrees C until analysis. The physical compatibility with PVC and chemical stability in solution of fotemustine were assessed by visual examination and by measuring the concentration of the drug in duplicate using a stability-indicating high-performance chromatographic assay. When admixed with a 5% dextrose solution, fotemustine 2 and 0.8 mg ml(-1) was compatible and stable over 1-h of simulated infusion using PVC bags through PVC administration sets with protection from light. On the other hand, in the same diluent, fotemustine was compatible and stable with PVC bags for at least 8 h at 22 degrees C with protection from light and for at least 48 h at 4 degrees C with protection from light. There were no pH variation, no visual change, no color change, no visible precipitation and no loss of the drug. Conversely, when the solutions were exposed to light (ambient or solar), the drug concentration decreased rapidly, leading to the production of a degradation product as shown by mass spectral analysis and a discoloration of the solutions. Finally, in all cases, no DEHP (di-2-ethylhexyl phthalate) was detected in the injection solution.

A rapid isocratic technique was developed for the analysis of three cephalosporins: cefaloridine, cefuroxime and ceftazidime in parenteral solutions using high-performance liquid chromatography (HPLC) with UV detection and C18 column. The availability and compatibility of drugs from solutions infused via plastic infusion bags through plastic administration sets have been examined. No significant drugs loss was observed during the simulated infusions (n = 4) for 1 h using PVC infusion bags and administration sets. No significant difference was found between infusion solutions (5% glucose or 0.9% NaCl). The stability of drugs was also studied in solution in PVC bags after storage at room temperature and at +4 degrees C without protection from light. The results show the stability of drugs during 24 h at room temperature and 7 d storage at +4 degrees C to be satisfactory, irrespective of the infusion solution (5% glucose or 0.9% NaCl).

The availability and compatibility of drugs from solutions infused via PVC infusion bags through PVC administration sets have been examined. No significant drug loss was observed during simulated infusions using PVC infusion bags and administration sets over time periods used in hospitals (cisplatin, 2 h; carboplatin, 1 h). The stability of carboplatin was studied in 5% dextrose. In 0.9% NaCl, we observed that carboplatin could be converted to cisplatin in the presence of chloride ions. With cisplatin, no significant difference was found between infusion solutions (5% dextrose or 0.9% NaCl). The stability of cisplatin (5% dextrose or 0.9% NaCl) and carboplatin (5% dextrose) was also studied in PVC bags after storage in the dark at room temperature. The results show that the drugs were stable over the 9-day storage period studied.

A rapid isocratic technique was developed for the analysis of cephamandole nafate and cephamandole in parenteral solutions using high-performance liquid chromatography (HPLC) with UV detection and C18 column. The availability and compatibility of drugs from solutions infused via plastic infusion bags through plastic administration sets have been examined. No significant drugs loss was observed during simulated infusions (n = 4) for 1 h using PVC infusion bags and administration sets. No significant difference was found between infusion solutions (5% glucose or 0.9% NaCl). The stability of drugs was also studied in solution in PVC bags after storage at room temperature and at 4 degrees C without protection from light. The results show the stability of cephamandole nafate during 24 h at room temperature and 7 days storage at 4 degrees C to be satisfactory, irrespective of the infusion solution (5% glucose or 0.9% NaCl). However, an almost immediate and total transformation of cephamandole nafate to cephamandole in 5% glucose has been observed, whereas in 0.9% NaCl both forms were found in similar proportions.

A rapid isocratic technique was developed for the analysis of four anthracyclines (doxorubicin, epirubicin, daunorubicin and pirarubicin) in parenteral solutions using high pressure liquid chromatography (HPLC) with fluorescence detection and a C18 Hypersil ODS column. The availability and compatibility of these drugs from solutions infused via PVC infusion bags through PVC administration sets have been examined. No significant drug loss was observed during simulated infusions (n = 4) for 24 h using PVC infusion bags and administration sets. No significant difference was found between infusion solutions (5% glucose or 0.9% NaCl), except for pirarubicin. The reconstitution of pirarubicin in 0.9% NaCl was impossible, because we observed a precipitation of the compound in solution. The stability of the drugs was also studied in solution, in PVC bags after storage at 4 degrees C with protection from light. The results show the stability of doxorubicin, epirubicin and daunorubicin during 7 days of storage to be satisfactory, irrespective of the infusion solution (5% glucose or 0.9% NaCl). In the case of pirarubicin, the stability of the drug was satisfactory during 5 days of storage in 5% glucose, but beyond, we observed a degradation of the compound with formation of doxorubicin in the infusion solution.

A wide variety of medical devices (MDs) used in hospitals are made of flexible plasticized polyvinylchloride (PVC). Different plasticizers are present in variable amounts in the PVC matrix of the devices and can leach out into the infused solutions and may enter into contact with the patients. The ARMED 1 1 ARMED: Assessment and Risk Management of Medical Devices in Plasticized Polyvinylchloride. project aims to assess the migration of these plasticizers from medical devices and therefore the level of exposure in patients. For the first task of the project, eight methods were developed to directly detect and quantify the plasticizers in the PVC matrix of the MDs. We compared the overall performances of the analytical methods using standardized and validated criteria in order to provide the scientific community with the guidance and the technical specifications of each method for the intended application. We have shown that routine rapid screening could be performed directly on the MDs using the FTIR technique, with cost-effective analyses. LC techniques may also be used, but with limits and only with individual quantification of the main plasticizers expected in the PVC matrix. GC techniques, especially GC–MS, are both more specific and more sensitive than other techniques. NMR is a robust and specific technique to precisely discriminate all plasticizers in a MD but is limited by its cost and its low ability to detect and quantify plasticizer contamination, e.g. by DEHP. All these results have been confirmed by a real test, called the " blind test " carried out on 10 MD samples. [ABSTRACT FROM AUTHOR]