Search

The rational design of carbon nanomaterials-reinforced polymer matrix composites based on the excellent properties of three-dimensional porous materials still remains a significant challenge. Herein, a novel approach is developed for preparing large-scale 3D carbon nanotubes (CNTs) and graphene oxide (GO) aerogel (GO-CNTA) by direct grafting of CNTs onto GO. Following this, styrene was backfilled into the prepared aerogel and polymerized in situ to form GO–CNTA/polystyrene (PS) nanocomposites. The results of X-ray photoelectron spectroscopy (XPS) and Raman spectroscopy indicate the successful establishment of CNTs and GO-CNT and the excellent mechanical properties of the 3D frameworks using GO-CNT aerogel. The nanocomposite fabricated with around 1.0 wt% GO-CNT aerogel displayed excellent thermal conductivity of 0.127 W/m∙K and its mechanical properties were significantly enhanced compared with pristine PS, with its tensile, flexural, and compressive strengths increased by 9.01%, 46.8%, and 59.8%, respectively. This facile preparation method provides a new route for facilitating their large-scale production.

The aim of this work consists in the recycling of the styrenic polymers coming from waste of electric and electronic equipments. Polystyrene (PS), high impact polystyrene (HIPS), poly(acrylonitrile-butadiene-styrene) (ABS), its alloy with the polycarbonate (ABS/PC) and poly(styrene-acrylonitrile) (SAN) are considered. A preliminary study permits to choose two blends to study: PS/ABS and PS/PC. In the case of PS/ABS blend, the ionic way of compatibilization was studied. The addition of a copolymer containing an ionic structure and the creation of an ionic network in-situ are investigated. Both these attempts are not conclusive about the improvement of the final properties of the blend. The PS/PC blend is then compatibilized by adding a polystyrene-block-poly(ethylene-butylene)-block-polystyrene grafted polycarbonate. This copolymer is first created in an internal mixer, in order to study different catalysts able to initiate the grafting, and then the reactive extrusion is used to synthesize it on a large scale. Several amounts are introduced in the PS/PC blend and the improvement of the properties and microstructures proves its compatibilizing effect; L‟objectif de cette thèse est de valoriser les polymères styréniques issus des déchets d‟équipements électroniques et électriques. Les polymères considérés sont le polystyrène (PS), le polystyrène choc (HIPS), le poly(acrylonitrile-butadiène-styrène) (ABS), l'ABS couplé avec du polycarbonate (ABS/PC) et le poly(styrène-acrylonitrile) (SAN). Une étude préliminaire a permis de définir deux mélanges à compatibiliser : le mélange PS/ABS et le mélange PS/PC. Pour le mélange PS/ABS, la voie de compatibilisation ionique est étudiée. L‟ajout d‟un copolymère présentant une structure ionique et la création d‟un réseau in-situ sont tentés. Ces deux voies n‟ont pas donné de résultats concluants en termes d‟amélioration des propriétés finales du mélange. Le mélange PS/PC est lui compatibilisé par ajout d‟un copolymère polystyrène bloc-poly(éthylène-butylène)-bloc-polystyrène greffé PC. Ce copolymère est tout d‟abord créé en mélangeur interne, afin d‟étudier différents catalyseurs susceptibles d‟initier le greffage, puis l‟extrusion réactive est utilisée pour synthétiser ce copolymère à grande échelle. Plusieurs taux de copolymère sont alors introduits dans le mélange PS/PC et l‟amélioration des propriétés et des microstructures prouve son effet compatibilisant