Search

Stimuli-responsive opposite emission (A)/absorption (B) polymer material (A∪B = Ω and A∩B = Ø) represents a novel polymer material that is difficult to prepare. Here, we demonstrate a one-pot strategy for the molecular design of stimuli-responsive opposite emission/absorption polymer material with intriguing properties of opposite emission/absorption and aggregation-induced emission (AIE) type nontraditional intrinsic luminescence (NTIL) in the visible region, through reversible addition-fragmentation chain transfer polymerization-induced emission (PIE) of the

A one-pot strategy for the design of stimuli-responsive luminescent polymers has been demonstrated through Barbier PIE, where the N,N-dimethyl moiety endows the polymers with both stimuli-responsive and red-shifted nonconjugated emission properties.

Barbier polymerization is realized at room-temperature with single-atom polymerization and polymerization-induced emission characteristics, which exhibits capability on sensitive explosive detection and artificial light-harvesting system fabrication.

The developments of the living alkene polymerization method have achieved great progress and enabled the precise synthesis of important polyalkenes with controlled molecular weight, molecular weight distribution, and architecture through an anionic, cationic or radical strategy. However, it is still challenging to develop a living alkene polymerization method through an all-in-one strategy where anionic and radical characteristics are merged into one polymerization species. Here, a versatile living polymerization method is reported by introducing a well-established all-in-one covalent-anionic-radical Barbier strategy into a living polymerization. Through this living covalent-anionic-radical Barbier polymerization (Barbier CARP), narrow distributed polystyrenes, with

The isosteric replacement of C═C by B–N units in conjugated organic systems has recently attracted tremendous interest due to its desirable optical, electronic and sensory properties. Compared with BN-, NBN- and BNB-doped polycyclic aromatic hydrocarbons, NBN-embedded polymers are poised to expand the diversity and functionality of olefin polymers, but this new class of materials remain underexplored. Herein, a series of polymers with BNB-doped π-system as a pendant group were synthesized by reversible addition-fragmentation chain transfer (RAFT) polymerization from NBN-containing vinyl monomers, which was prepared via intermolecular dehydration reaction between boronic acid and diamine moieties in one pot. Poly{2-(4-Vinylphenyl)-2,3-dihydro-1H-naphtho[1,8-de][1,3,2]diazaborinine} (P1), poly{N-(4-(1H-naphtho[1,8-de][1,3,2]diazaborinin-2(3H)-yl)phenyl)acrylamide} (P2) and poly{N-(4-(1H-benzo[d][1,3,2]diazaborol-2(3H)-yl)phenyl)acrylamide} (P3) were successfully synthesized. Their structure, photophysical properties and application in metal ion detection were investigated. Three polymers exhibit obvious solvatochromic fluorescence. As fluorescent sensors for the detection of Fe3+ and Cr3+, P1 and P2 show excellent selectivity and sensitivity. The limit of detection (LOD) achieved by Fe3+ is 7.30 nM, and the LOD achieved by Cr3+ is 14.69 nM, which indicates the great potential of these NBN-embedded polymers as metal fluorescence sensors.

As predicted by Flory–Stockmayer theory, precise control of polymer architecture, molecular weight, and molecular weight distribution in the polymerization of tri-vinyl monomers has been recognized as a considerable challenge in polymer chemistry. Multi-responsive polymers are generally designed by incorporating multiple sensitive moieties together in one polymer chain. However, this strategy suffers from issues of complicated synthesis and the compatibilities of these functional moieties. The design of multi-responsive polymers by incorporating only one sensitive moiety is of considerable importance. Here, we report the successful, well-controlled polymerization of tri-vinyl containing dynamic covalent boroxine (DCB) monomer, and utilization of DCB as a side-chain building block in the molecular design of a multi-responsive polymer. Benefiting from dynamic characteristics, the DCB-incorporated polymer exhibits tunable penta-responsive behavior leading to response/sensing of water, fluoride ion, and acid and base, as well as lower critical solution temperature-type thermo-responsive properties, which cover a wide temperature range, and with both solution–colloid transition and sol–gel transition observed. The utilization of only one DCB moiety in the design of the tunable penta-responsive polymer breaks the stimulus record of multi-responsive polymers, and opens up a new avenue in the molecular design and application of functional polymer materials.

Electron-deficient borinic acid monomers and corresponding polymers were synthesized with different substituents via a one-pot reaction of Grignard reagents with trimethoxyborane and reversible addition–fragmentation chain transfer polymerization, respectively. Further investigations of substituent effects of borinic acid polymers (PBAs) were carried out, indicating that the thermoresponsive properties of PBAs benefit from the increase of steric hindrance of PBA substituent, while the binding affinity of PBAs with Alizarin Red S, 8-hydroxyquinoline (HQ), and fluoride ion decreases with the increase of steric hindrance of substituent. Attributed to the strong dative N → B bond and the strongly luminescent boron quinolate, the application of phenyl PBA for fluorescence detection of HQ is realized with high sensitivity at the ppm level. These results therefore confirm that borinic acid-containing polymer is a new type of stimuli-responsive polymer in the field of thermoresponsiveness over a wide temperature ...

Self-assembly of block copolymers (BCPs) in solution is a powerful technology to achieve a broad range of structures, such as spheres, cylinders, vesicles, and other hierarchical structures. However, the BCP self-assembly library is limited, especially with respect to tubular structures. Here we show a versatile strategy to expand the morphology library of block copolymer solution self-assemblies with tubular structures (including tubular dumbbells and tubules) via self-assembly of the most common diblock copolymers P4VP-b-PS BCPs in methanol. No special chemistry is needed in this strategy, which proves the universality of this method. The novelty of the strategy is to keep the BCPs both highly asymmetric and with very high molecular weight. The underlying formation mechanism and kinetics of these tubular structures were elucidated. The prepared tubular structures expand the structure library of BCP solution self-assemblies and open up a new avenue for the further applications of a variety of tubular mat...

Borinic acid block copolymers have been prepared by reversible addition–fragmentation chain transfer (RAFT) polymerization and investigated as “smart materials” in sensory applications. Taking advantage of the hydrogen bond donating ability of the borinic acid groups, supramolecular aggregates of PNIPAM-b-PBA were generated by complexation with P4VP. The P4VP complex showed greatly improved fluoride ion detection efficiency relative to the PBA polymer by itself. The block copolymer PS-b-PBA was processed into porous films with tunable pore size by drop-casting from THF in the presence of trace amounts of water. A microporous polymer film that was deposited on an electrode was utilized as a biosensor for acetylthiocholine chloride detection after immobilization of acetylcholine esterase.

A series of micelle-forming, amphiphilic copolymers or “polysoaps” with potential as dispersants for oil spill remediation has been synthesized via statistical RAFT copolymerization of specific molar ratios of 2-acrylamido-2-methylpropane sulfonic acid (AMPS) and n-dodecyl acrylamide (DDAM). Control over composition, degree of polymerization, polydispersity, and reaction kinetics was attained by conducting the copolymerizations at 60 °C in dimethylformamide with AIBN and CEP as initiator and chain-transfer agent, respectively. Molecular weight, hydrodynamic dimensions, composition- and concentration-dependent associative properties, and hydrophobic domain characteristics in water for copolymers with 10, 20, 30, 40, 50, and 60 mol% feed of DDAM have been studied utilizing NMR, SEC/MALLS, DLS, SLS, surface tensiometry, and fluorescence spectroscopy. It was found that the lower hydrophobic content (10%, 20%, and 30%) polysoaps form multimeric associations as indicated by increasing hydrodynamic dimensions as concentration is increased. On the other hand, the higher hydrophobic content (40%, 50%, and 60%) polysoaps form unimolecular micelles with consistent sizes and with distinct hydrophobic cores over the entire concentration range probed. UV/Vis absorbance experiments provided additional insight into the association and sequestration properties of the polysoaps. The higher hydrophobic content polysoaps show increased capabilities for dissolution of pyrene as compared to SDS above its CMC. Finally, the cytotoxicity of these polysoaps was determined utilizing KB cell lines. The polysoaps of this study exhibited up to 60× less cytotoxicity than SDS as measured by IC50 values. It was also found that as the molecular weight of the polysoap increased, the cytotoxicity decreased. The results of this study point to potential of unimolecular micelles for oil spill remediation, allowing sequestration and subsequent hydrocarbon break-down by endogenous bacteria in the marine environment.

A simplified one-pot and less harmful method has been introduced for the synthesis of borinic acid monomer. The corresponding borinic acid polymer (PBA) has been prepared by reversible addition-fragmentation chain transfer polymerization. Property investigations confirm the characteristics of PBA as a new type of "smart material" in the field of thermo-responsive polymer. The potential application of PBA in the field of enzymatic biofuel cell has been illustrated with a wide open circuit potential of 0.92 V.

A one-pot method is introduced for the successful synthesis of narrow-distributed (Đ = 1.22) vinyl polymer with both ultrahigh molecular weight (UHMW) (M w = 1.31 × 106 g mol-1 ) and micro-/nanomorphology under mild conditions. The method involves the following four stages: homogeneous polymerization, polymerization-induced self-assembly (PISA), PISA and reorganization, and PISA and multiple reorganizations. The key points to the production of UHMW polystyrene are to minimize radical termination by segregating radicals in different nanoreactors and to ensure sufficient chain propagation by promoting further reorganizations of these reactors in situ. This method therefore endows polymeric materials with the outstanding properties of both UHMW and tunable micro-/nanoparticles under mild conditions in one pot.

The assembly behavior of diblock copolymers in solution can be modulated by block length, block ratio, solvent properties, and preparation route. Different assembly morphologies such as spherical micelles, cylindrical micelles, vesicles, and large compound vesicles have been obtained for diblock copolymers with shorter solvated block, such as poly(acrylic acid)-b-polystyrene (PAA-b-PSt). In the present work, we reported an easy-going route to prepare PAA-b-PSt assemblies with different morphologies through reversible addition−fragmentation-transfer (RAFT) dispersion polymerization of styrene in methanol with trithiocarbonated PAA as macromolecular chain transfer agent. Because this RAFT dispersion polymerization exhibited controlled features, the consecutive growth of PSt block led to the successive transition of the obtained PAA-b-PSt assemblies from spherical micelles, cylindrical micelles, vesicles, to large compound vesicles, confirmed by the combination of electron microscopy, laser light scattering,...

A facile and feasible strategy for the preparation of vesicular morphologies has been developed using reversible addition-fragmentation chain transfer (RAFT) polymerization. The polymerization of styrene has been performed in a selected solvent, methanol, using S-1-dodecyl-S-(α,α'-dimethyl-α″-acetic acid)trithiocarbonate (TC)-terminated poly(4-vinylpyridine) as chain transfer agent and stabilizer. Various morphologies including spherical vesicles, nanotubes, and compound vesicles with different shapes are obtained by changing the feed ratios and reaction conditions. The final nanostructural materials are formed through formation of the block copolymers, self-assembly, and re-organization of the morphology in a one-pot polymerization. The latter two are induced by the propagation of PS blocks. The preparation of nanostructural materials can be performed at a concentration higher than 0.5 g · mL(-1) , thus this method offers a practical approach to prepare nanostructural materials on a large scale.

The atom transfer radical dispersion polymerization of 4-vinylpyridine (4VP) in an ethanol/H2O mixture displayed two stages of polymerization; the first stage is the formation of a diblock copolymer with the polymerization rate of 1.21 mol·L-1·h-1 before 1 h of polymerization, and the second is the main polymerization in micelles formed from the aggregation of the resultant block copolymers with the polymerization rate of 0.009 mol·L-1·h-1. The 2-bromoisobutyryl-terminated poly(ethylene glycol) methyl ether used in the polymerization acts as both a stabilizer and an initiator. The stable micelles with functional core were synthesized by a one-pot strategy via atom transfer radical dispersion copolymerization (ATRDCP) of 4VP and N,N‘-methylenebisacrylamide (MBA) in an ethanol/H2O solution for the first time. In the initial stage of polymerization, 4VP and MBA were copolymerized to form a block copolymer, PEG-b-(4VP-co-MBA), with pendent unreacted vinyl groups, and after phase separation at a critical chain...

Block copolymer (BCP) self-assembly is a versatile technique in the preparation of polymeric aggregates with varieties of morphologies. However, its morphology library is limited. Here, the discovery of pincushion of tubules is reported for the first time, via BCP self-assembly of poly(4-vinylpyridine)-b-polystyrene (P4VP-b-PS) with very high molecular weight (500 kDa) and asymmetry (2 mol% P4VP). The investigation confirms the importance of core-forming block length on morphology control of BCP self-assemblies, especially with respect to tubular structures. The morphology landscape of tubular structures is successfully established, where dumbbell of tubule, tubule, loose clew of tubules, tight clew of tubules, and pincushion of tubules can be prepared by adjusting the core-forming block length. This work therefore expands the structure library of BCP self-assemblies and opens up a new avenue for the further applications of these tubular materials.

A facile synthetic pathway for preparing block copolymers with pH-responsive L-glutamic acid segments for membrane disruption is reported. Aqueous reversible addition-fragmentation chain transfer (aRAFT) polymerization was first used to prepare biocompatible, nonimmunogenic poly[N-(2-hydroxypropyl)methacrylamide]. This macro chain transfer agent (CTA) was then converted into a macroinitiator via simultaneous aminolysis and thiol-ene Michael addition using the primary amine substituted N-(3-aminopropyl)methacrylamide. This macroinitiator was subsequently utilized in the ring-opening polymerization of the N-carboxyanhydride monomer of γ-benzyl-L-glutamate. After deprotection, the pH-dependent coil-to-helix transformations of the resulting HPMA-b-(L-Glu) copolymers were monitored via circular dichroism spectroscopy. HPMA segments confer water solubility and biocompatibility while the L-glutamic acid repeats provide reversible coil-to-helix transitions at endosomal pH values (~5-6). The endolytic properties of these novel [HPMA-b-(L-Glu)] copolymers and their potential as modular components in drug carrier constructs was demonstrated utilizing red blood cell hemolysis and fluorescein release from POPC vesicles.

A novel strategy for preparation of multiple nanostructural materials, which is the creation of such materials directly from controlled radical dispersion polymerization in one pot, has been developed. In the formation of polymeric nanomaterials, the chain length ratio of the hydrophobic to hydrophilic blocks is altered continuously, which induces two phase transitions, phase separation to form spherical micelles and re-organization of the resulting spheres to yield multiple morphologies including nanorods, nanotubes, vesicles and doughnuts. This is quite different from self-assembly of the block copolymer in a selective solvent, where nature and solubility parameter of the solvents are changed. In the reversible addition-fragmentation chain transfer (RAFT) polymerization of styrene in methanol using poly(4-vinylpyridine) as macro RAFT agent, the resultant polymeric nanomaterials with various morphologies coexisted generally, however, uniform nanowires and vesicles could be prepared by appropriately selecting concentration of monomer and feed ratio, as well as by strict control of reaction conditions. One advantage of this strategy is that the nanomaterials with a concentration as high as 0.5 g mL−1 can be achieved, this provides possibility for studying extensive applications of the various nanomaterials.