Search

The success of polymerase chain reaction (PCR) depends on the quality of deoxyribonucleic acid (DNA) templates. This study developed a cost-effective and eco-friendly DNA extraction system utilizing poly(3,4-dihydroxyphenylalanine)-modified cellulose paper (polyDOPA@paper). PolyDOPA@paper was prepared by oxidatively self-polymerizing DOPA under weak alkaline conditions and utilizing the adhesive property of polyDOPA on different materials. Compared to the uncoated cellulose paper, polyDOPA coating significantly enhances DNA adsorption owing to its abundant amino, carboxyl, and hydroxyl moieties. The DNA extraction mechanism using polyDOPA@paper was discussed. The maximum adsorption capacity of polyDOPA@paper for DNA was 20.7 μg cm -2 . Moreover, an automated extraction system was designed and fabricated using 3D printing technology. The device simplifies the operation and ensures the reproducibility and consistency of the results. More importantly, it eliminates the need for specialized training of operators. The feasibility of the polyDOPA@paper-based automated extraction system was evaluated by quantitatively detecting Escherichia coli in spiked milk samples via a real-time PCR. The detection limit was 10 2 cfu mL -1 . The results suggest that the system would have significant potential in detecting pathogens., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Hyperuricemia (HUA) has gradually become a public health burden as an independent risk factor for a variety of chronic diseases. Herein, a user-friendly point-of-care (POC) detection system (namely "Smart-HUA-Monitor") based on smartphone-assisted paper-based microfluidic is proposed for colorimetric quantification of HUA urinary markers, including uric acid (UA), creatinine (CR) and pH. The detection limits of UA and CR were 0.0178 and 0.5983 mM, respectively, and the sensitivity of pH were 0.1. The method was successfully validated in artificial urine samples and 100 clinical samples. Bland-Altman plots showed a high consistency between μPAD and the testing instruments (HITACHI 7600 Automatic Analyzer, URIT-500B Urine Analyzer and AU5800B automatic biochemical analyzer) in hospital. Smart-HUA-Monitor provides an accurate quantitative, rapid, low-cost and reliable tool for the monitoring and early diagnosis of HUA urine indicators., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Cellulose fibers(CFs)-based electrode materials are of considerable interest for future wearable electronic devices due to excellent flexibility and strength, and hydrophilicity. The effective introduction of electrode materials into CFs is essential for flexible supercapaciotors(SCs). A tunable electrochemical performance of conductive polymers for poly(3,4-ethylenedioxythiophene)(PEDOT) has been aroused great interests. Herein, we design its electrochemical process via sodium anthraquinone-2-sulfonate(AQS) as dopant and electrolyte additive to construct active electrode interior and interface. As a result, the PEDOT@CFs electrode exhibits great increase of doping level from 0.16 to 0.29, conductivity from 353.46 to 626.15 S m -1 , and specific capacitance from 140.22 to 1211.57 F g -1 at a current density of 0.2 A g -1 . Furthermore, the PEDOT:AQS@CFs electrode possess excellent cyclic stability (96.01 %) after 1000 cycles. The work reveals the mechanism of AQS as dopant and electrolyte additive, and provides a new perspective for application of PEDOT in energy storage field., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

The development of distance-based paper analytical devices (dPADs) integrated with molecularly imprinted polymers (MIPs) to monitor Escherichia coli (E. coli) levels in food samples is presented. The fluidic workflow on the device is controlled using a designed hydrophilic bridge valve. Dopamine serves as a monomer for the formation of the E. coli-selective MIP layer on the dPADs. The detection principle relies on the inhibition of the E. coli toward copper (II) (Cu 2+ )-triggered oxidation of o-phenylenediamine (OPD) on the paper substrate. Quantitative detection is simply determined through visual observation of the residual yellow color of the OPD in the detection zone, which is proportional to E. coli concentration. The sensing exhibits a linear range from 25.0 to 1200.0 CFU mL -1 (R 2  = 0.9992) and a detection limit (LOD) of 25.0 CFU mL -1 for E. coli detection. Additionally, the technique is highly selective with no interference even from the molecules that have shown to react with OPD to form oxidized OPD. The developed device demonstrates accuracy and precision for E. coli quantification in food samples with recovery percentages between 98.3 and 104.7% and the highest relative standard deviation (RSD) of 4.55%. T-test validation shows no significant difference in E. coli concentration measured between our method and a commercial assay. The proposed dPAD sensor has the potential for selective and affordable E. coli determination  in food samples without requiring sample preparation. Furthermore, this strategy can be extended to monitor other molecules for which MIP can be developed and integrated into paper-microfluidic platform., (© 2024. The Author(s), under exclusive licence to Springer-Verlag GmbH Austria, part of Springer Nature.)

Ageing of paper is a complex process of great relevance for application purposes because of its widespread use as support for information storage in books and documents, and as common low-cost and green packaging material, to name a few. A key factor in paper ageing is the oxidation of cellulose, a macromolecule of natural origin that constitutes the main chemical component of paper. Such a complex process results in changes in the cellulose polymeric chains in chemical and structural properties. The scope of this work is to explore the effects of oxidation of cellulose as one of the principal mechanisms of ageing of paper using a fluorescence-based approach. To this aim, fluorescence-lifetime imaging microscopy (FLIM) measurements on pure cellulose samples stained using Carbotrace 680 dye were performed, and data were analyzed by phasor approach. The comparison with results from conventional techniques allowed to map paper microstructure as a function of the sample oxidation degree correlating the fluorescence-lifetime changes to cellulose oxidation. A two-step oxidation kinetics that produced specific modification in paper organization was highlighted indicating that FLIM measurements using Carbotrace 680 dye may provide a simple tool to obtain information on the oxidation process also adding spatial information at sub-micrometric scale., Competing Interests: Declaration of competing interest The authors declare that they have no competing interests., (Copyright © 2024 The Authors. Published by Elsevier B.V. All rights reserved.)

The challenge of global climate change has drawn people's attention to the issue of carbon emissions. Reducing the use of petroleum-derived materials and increasing the use of biodegradable materials is a current focus of research, especially in the packaging materials industry. This study focused on the use of environmentally friendly plastics and waste paper as the main materials for packaging films. Poly(butylene succinate-co-lactate) (PBSL) was modified with maleic anhydride (MA) to form a biobased compatibilizer (MPBSL), which was then blended with a mixture (WPS) of waste-paper powder (WP) and silica aerogel powder (SP) to form the designed composite (MPBSL/WPS). The modification of PBSL with MA improved interfacial adhesion between PBSL and WPS. The structure, thermal, and mechanical properties, water vapor/oxygen barrier, toxicity, freshness, and biodegradability of MPBSL/WPS films were evaluated. Compared with the PBSL/WP film, the MPBSL/WPS film exhibited increased tensile strength at break of 4-13.5 MPa, increased initial decomposition loss at 5 wt% of 14-35 °C, and decreased water/oxygen permeabilities of 18-105 cm 3 /m 2 ·d·Pa. In the water absorption test, the MPBSL/WPS film displayed about 2-6 % lower water absorption than that of the PBSL/WP film. In the cytocompatibility test, both MPBSL/WPS and PBSL/WP membrane were nontoxic. In addition, compared with PBSL/WP film and the control, the MPBSL/WPS film significantly reduced moisture loss, extended the shelf life, and prevented microbial growth in vegetable and meat preservation tests. Both MPBSL/WPS and PBSL/WP films were biodegradable in a 60-day soil biodegradation test; the degradation rate was 50 % when the WP or WPS content was 40 wt%. Our findings indicate that the composites would be suitable for environmentally sustainable packaging materials., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Cellulosic paper-based electrode materials have attracted increasing attention in the field of flexible supercapacitor. As a conductive polymer, polyaniline exhibits high theoretical pseudocapacitive capacitance and has been applied in paper-based electrode materials along with cellulose fibers. However, the stacking of polyaniline usually leads to poor performance of electrodes. In this study, metal-organic coordination polymers of zirconium-alizarin red S and zirconium-phytic acid are applied to modulate the polyaniline layer to obtain high-performance cellulosic paper-based electrode materials. Zirconium hydroxide is firstly loaded on cellulose fibers while alizarin red S and phytic acid are introduced to regulate the morphology of polyaniline through doping and coordination processes. The results show that the introduction of dual coordination polymers is effective to regulate the morphology of polyaniline on cellulose fibers. The performances of the paper-based electrode materials, including electrical conductivity and electrochemistry, are apparently improved. It provides a promising strategy for the potential development of economical and green electrode materials in the conventional paper-making process., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

The role of astrocytes in brain function has received increased attention lately due to their critical role in brain development and function under physiological and pathophysiological conditions. However, the biological evaluation of soft material nanoparticles in astrocytes remains unexplored. Here, the interaction of crosslinked hybrid vesicles (HVs) and either C8-D1A astrocytes or primary astrocytes cultured in polystyrene tissue culture or floatable paper-based chips is investigated. The amphiphilic block copolymer poly(cholesteryl methacrylate)-block-poly(2-carboxyethyl acrylate) (P1) and 1,2-dioleoyl-sn-glycero-3-phosphoethanolamine lipids are used for the assembly of HVs with crosslinked membranes. The assemblies show no short-term toxicity towards the C8-D1A astrocytes and the primary astrocytes, and both cell types internalize the HVs when cultured in 2D cell culture. Further, it is demonstrated that both the C8-D1A astrocytes and the primary astrocytes could mature in paper-based chips with preserved calcium signaling and glial fibrillary acidic protein expression. Last, it is confirmed that both types of astrocytes could internalize the HVs when cultured in paper-based chips. These findings lay out a fundamental understanding of the interaction between soft material nanoparticles and astrocytes, even when primary astrocytes are cultured in paper-based chips offering a 3D environment., (© 2022 The Authors. Advanced Biology published by Wiley-VCH GmbH.)

This research aims to develop white bread shelf-life extension sachet with controlled release of antimicrobial agent prepared from multicomponent bio-based materials. The structure of antimicrobial sachet consists of two major parts i.e., controlled release part and active part. The first part produced from paper coated with ethylene vinyl alcohol (EVOH). The second one was an active part which produced from biodegradable poly(butylene succinate) (PBS) and geraniol essential oil blend. Inhibition clear zone test results showed that a suitable geraniol concentration, encapsulated in PBS, was 10 wt%. Based on the water vapor transmission test, coating paper with EVOH for three times (around 450 μm) was an optimal condition for the use as a controlled release part. Release test indicated that geraniol migration concentration increased with increasing the relative humidity (RH) in the package which correlated to the moisture liberated from bread slice. Shelf-life extension study informed that the spoilage of bread stored with antimicrobial sachet was delayed by more than three weeks. In summary, this antimicrobial sachet could be used in food shelf-life extension purpose which easily placed in any food container. This is an alternative way of food waste minimization., (Copyright © 2021 Elsevier B.V. All rights reserved.)

Enzyme-linked immunosorbent assay (ELISA) is widely used for the detection of disease biomarkers. However, it utilizes time-consuming procedures and expensive instruments, making it infeasible for point-of-care (POC) analysis especially in resource-limited settings. In this work, a multicolorimetric ELISA biosensor integrated on a paper/polymer hybrid microfluidic device was developed for rapid visual detection of disease biomarkers at point of care, without using costly equipment. This multicolormetric ELISA platform was built on multiple distinct color variants resulted from the catalytic oxidation of 3,3',5,5'-tetramethylbenzidine (TMB) and the etching of gold nanorods (AuNRs). The vivid color changes could be easily distinguished by the naked eye, and their red mean values allowed quantitative biomarker detection, without using any sophisticated instruments. When this multicolorimetric ELISA was integrated on a paper/polymer hybrid analytical device, it not only provided integrated processing and high portability but also enabled fast assays in about 50 min due to the unique advantages of paper/polymer hybrid devices. The limit of detection of 9.1 ng/μL of the hepatitis C virus core antigen, a biomarker for hepatitis C, was achieved using this multicolorimetric ELISA platform. This multicolor ELISA analytical device provides a new versatile, user-friendly, affordable, and portable immunosensing platform with high potential for on-site detections of various viruses, proteins, and biomarkers for low-resource settings such as at home, public venues, rural areas, and developing nations.

Flexible paper-based sensors may be applied in numerous fields, but this requires addressing their limitations related to poor thermal and water resistance, which results in low service life. Herein, we report a paper-based composite sensor composed of carboxylic carbon nanotubes (CCNTs) and poly- m -phenyleneisophthalamide (PMIA), fabricated by a facile papermaking process. The CCNT/PMIA composite sensor exhibits an ability to detect pressures generated by various human movements, attributed to the sensor's conductive network and the characteristic "mud-brick" microstructure. The sensor exhibits the capability to monitor human motions, such as bending of finger joints and elbow joints, speaking, blinking, and smiling, as well as temperature variations in the range of 30-90 °C. Such a capability to sensitively detect pressure can be realized at different applied frequencies, gradient sagittas, and multiple twists with a short response time (104 ms) even after being soaked in water, acid, and alkali solutions. Moreover, the sensor demonstrates excellent mechanical properties and hence can be folded up to 6000 times without failure, can bear 5 kg of load without breaking, and can be cycled 2000 times without energy loss, providing a great possibility for a long sensing life. Additionally, the composite sensor shows exceptional Joule heating performance, which can reach 242 °C in less than 15 s even when powered by a low input voltage (25 V). From the perspective of industrialization, low-cost and large-scale roll-to-roll production of the paper-based sensor can be achieved, with a formed length of thousands of meters, showing great potential for future industrial applications as a wearable smart sensor for detecting pressure and temperature, with the capability of electric heating.

The development of actuators for power sources is essential for the efficient manipulation of fluids in microfluidics systems. In this work, a capacitor-type three-layer paper actuator was fabricated by sandwiching a polyelectrolyte layer between two films of poly(3,4-ethylenedioxythiophene) doped with poly(4-styrenesulfonate) (PEDOT/PSS). The paper actuator exhibited stable large electromechanical deformations in bilateral symmetry under alternating square-wave electric field. The actuation properties were examined in a function of voltage (±0.5, ±1, ±1.5, ±2, and ±2.5 V) and frequency (1, 0.5, 0.2, and 0.05 Hz). In addition, the PEDOT/PSS electrode films with different thicknesses were prepared, and the effects of actuator thickness on actuation properties were examined. As a result, it was found that the actuator displacement increased considerably with reducing actuator thickness. In addition, the actuator with a thickness of 48 μm demonstrated a maximum displacement of 5.8 mm at a voltage of 1.5 V and a frequency of 0.05 Hz. The proposed actuator can be potentially used in the development of power sources for micropumps and check valves of microfluidic devices.

As a global shift continues to occur in high burden diseases toward developing countries, the importance of medical diagnostics based on point-of-care testing (POCT) is rapidly increasing. However, most diagnostic tests that meet clinical standards rely on high-end analyzers in central hospitals. Here, we report the development of a simple, low-cost, mass-producible, highly sensitive/quantitative, automated, and robust paper/soluble polymer hybrid-based lateral flow biosensing platform, paired with a smartphone-based reader, for high-performance POCT. The testing architecture incorporates a polymeric barrier that programs/automates sequential reactions via a polymer dissolving mechanism. The smartphone-based reader with simple opto-mechanical parts offers a stable framework for accurate quantification. Analytical performance of this platform was evaluated by testing human cardiac troponin I (cTnI), a preferred biomarker for the diagnosis of myocardial infarction, in serum/plasma samples. Coupled with catalytic/colorimetric gold-ion amplification, this platform produced results within 20 min with a detection limit of 0.92 pg mL -1 and a coefficient of variation <10%, which is equivalent to the performance of a high-sensitivity standard analyzer, and operated within acceptable levels stipulated by clinical guidelines. Moreover, cTnI clinical sample tests indicate a high correlation ( r = 0.981) with the contemporary analyzers, demonstrating the clinical utility of this platform in high-performance POCT.

We developed a paper-based analytical device based on the electropolymerization of poly (3,4-ethylenedioxythipohene) (PEDOT) and graphene oxide (GO) composites on the ITO substrate for the detection of uric acid (UA) in authentic human saliva. Scanning electron microscopy, UV-vis spectrum and X-ray diffraction confirmed the formation of porous PEDOT combined with GO film during the electropolymerization process. The nanocomposite based sensor showed an enhanced electrocatalytic activity toward UA with high sensitivity and stability. We demonstrate that UA can be directly detected in undiluted saliva using the paper-based electroanalytical device with no interference from ascorbic acid and dopamine that are normally present in biological fluids. The results indicated that the developed device is promising for non-invasive monitoring of salivary UA in human body., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2019 Elsevier B.V. All rights reserved.)

A new planar sorptive phase based on the simple immobilization of polymeric ionic liquids on paper is proposed. The sorptive phase can develop hydrophobic or mixed-mode (combining hydrophobic and ion exchange) interactions with the target analytes. The polymer is prepared by the Radziszewski reaction, which takes place in aqueous media, and it has been thoroughly characterized by different techniques including infrared spectroscopy, matrix-assisted laser desorption/ionization coupled to high-resolution mass spectrometry and proton nuclear magnetic resonance. Three different strategies aimed to immobilize the polymeric ionic liquid on paper have been evaluated. Among them, simple thermal curing at 120 °C was selected. The as-prepared paper has been evaluated for the extraction of several non-steroidal anti-inflammatory drugs from urine, the analytes being finally determined by liquid chromatography with tandem mass spectrometry. The method detection limits were 3.8, 7.2, 6.8, 9.4, 15.7, and 5.1 μg/L for indomethacin, diclofenac, tolmetin, ketoprofen, naproxen, and ibuprofen, respectively. Calibration models were linear (R 2  > 0.9949) up to 1000 μg/L. The intra-day precision, expressed as relative standard deviation and calculated at three different concentrations levels (limit of quantification, 250 μg/L, and 1000 μg/L), varied between 1.1 and 13%. The accuracy, calculated as relative recovery, was in the range from 72 to 95%, thus being considered appropriate. The easiness of polymeric ionic liquid paper synthesis and the multi-sample extraction protocol designed allows the processing of a high number of samples at the same time., (Copyright © 2019 Elsevier B.V. All rights reserved.)

Culturing cells in three-dimensional (3D) environment can obtain a better clinical prediction for evaluating chemotherapy protocols and become a standard culture practice in cancer research. However, it involves tedious and time consuming operation. In the current work, a paper/polymer composited microfluidic platform was developed for screening cell viability and protein expression under chemical gradient environment. Cells were cultured in a paper sheet and expressed cell properties in 3D environment. The paper sheet was encapsulated in the microfluidic platform generating chemical gradient. After the culture course, investigations of cell viability and protein expression were respectively achieved by directly adding reagent and conducting on-paper immunoassay. Activation of respective signaling pathway could be identified and responded to different stimulations including nutrient gradient, IL-6 cytokine gradient, and anti-cancer drug gradient. On-paper analysis of protein expression could be completed within 1.5 h. The present technique integrates tedious operations on a single paper substrate. It provides a first-tier screening tool for cellular response under chemical gradient., (Copyright © 2019 Elsevier B.V. All rights reserved.)

Microfluidic paper combines pump-free water transport at low cost with a high degree of sustainability, as well as good availability of the paper-forming cellulosic material, thus making it an attractive candidate for point-of-care (POC) analytics and diagnostics. Although a number of interesting demonstrators for such paper devices have been reported to date, a number of challenges still exist, which limit a successful transfer into marketable applications. A strong limitation in this respect is the (unspecific) adsorption of protein analytes to the paper fibers during the lateral flow assay. This interaction may significantly reduce the amount of analyte that reaches the detection zone of the microfluidic paper-based analytical device (µPAD), thereby reducing its overall sensitivity. Here, we introduce a novel approach on reducing the nonspecific adsorption of proteins to lab-made paper sheets for the use in µPADs. To this, cotton linter fibers in lab-formed additive-free paper sheets are modified with a surrounding thin hydrogel layer generated from photo-crosslinked, benzophenone functionalized copolymers based on poly-(oligo-ethylene glycol methacrylate) (POEGMA) and poly-dimethyl acrylamide (PDMAA). This, as we show in tests similar to lateral flow assays, significantly reduces unspecific binding of model proteins. Furthermore, by evaporating the transport fluid during the microfluidic run at the end of the paper strip through local heating, model proteins can almost quantitatively be accumulated in that zone. The possibility of complete, almost quantitative protein transport in a µPAD opens up new opportunities to significantly improve the signal-to-noise (S/N) ratio of paper-based lateral flow assays.

Paper-based analytical devices (PADs) are highly effective tools due to their low cost, portability, low reagent accumulation, and ease of use. Molecularly imprinted polymers (MIP) are also extensively used as biomimetic receptors and specific adsorption materials for capturing target analytes in various complex matrices due to their excellent recognition ability and structural stability. The integration of MIP and PADs (MIP-PADs) realizes the rapid, convenient, and low-cost application of molecular-imprinting analysis technology. This review introduces the characteristics of MIP-PAD technology and discusses its application in the fields of on-site environmental analysis, food-safety monitoring, point-of-care detection, biomarker detection, and exposure assessment. The problems and future development of MIP-PAD technology in practical application are also prospected., Competing Interests: The authors declare no conflict of interest.

In this work, different paper surface modification strategies were compared to obtain an amine functionalized SBA-15 (N-SBA-15) composite for paper-based device development. The synthesized N-SBA-15 was characterized by N 2 adsorption-desorption isotherm, and infrared spectroscopy (FTIR), and it was incorporated to different polymer matrices (κ-carrageenan (CA), polyvinyl alcohol (PVA) and polyethylenimine (PEI)) for the development of the composite modified paper-based device. The retention, interactions, and morphology of the obtained composites were investigated by absorbance measurement, FTIR and scanning electron microscopy (SEM), respectively. To demonstrate the applicability of the modified paper-based device, ascorbic acid (AA) quantification was carried out. Horseradish peroxidase (HRP) was immobilized onto the modified paper surface. HRP in the presence of H 2 O 2 catalyzes the oxidation of 10-acetyl-3,7-dyhidroxyphenoxazine (ADHP) to highly fluorescent resorufin, which was measured by LIF detector. Thus, when AA was added to the solution, it decreases the relative fluorescence signal proportionally to the AA concentration. The linear range from 50 nmol L -1 to 1500 nmol L -1 and a detection limit of 15 nmol L -1 were obtained for AA quantitation. The obtained results allowed us to conclude that N-SBA-15/PEI composite could be considered an excellent choice for the paper-based device modification procedure due to its inherent simplicity, low cost, and sensitivity., (Copyright © 2019 Elsevier B.V. All rights reserved.)

We report results of the studies relating to the fabrication of a label-free, flexible, light weight and disposable conducting paper based immunosensing platform comprising of poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) and nanostructured iron oxide (nFe 2 O 3 @PEDOT:PSS) nanocomposite for detection of carcinoembryonic antigen (CEA), a cancer biomarker. The effect of various solvents such as sorbitol, ethanol, propanol, n-methyl-2-pyrrolidone (NMP) and dimethyl sulfoxide (DMSO) on the electrical conductivity of Whatman filter paper (WP) modified with nFe 2 O 3 @PEDOT:PSS/WP was investigated. The electrical conductivity of the PEDOT:PSS/WP electrode was found to be enhanced by two orders of magnitude (from 6.8× 10 -4 to 1.92 × 10 -2 Scm -1 ) after its treatment with DMSO. Further, nFe 2 O 3 doped PEDOT:PSS/WP electrode exhibited the electrical conductivity as 2.4 × 10 -2 Scm -1 . Besides this, the incorporation of iron oxide nanoparticles (nFe 2 O 3 ) into PEDOT:PSS/WP resulted in improved electrochemical performance and signal stability. This nFe 2 O 3 @PEDOT:PSS/WP based platform was used for immobilization of the anti-carcinoembronic antigen (anti-CEA) protein for quantitative estimation of cancer biomarker (CEA). The results of electrochemical response studies revealed that this conducting paper based immunoelectrode had a sensitivity of 10.2 μAng -1 mLcm -2 in the physiological range (4-25 ngmL -1 ) and shelf life of 34 days. Further, the proposed immunoelectrode was validated with conventional ELISA for the detection of CEA in serum samples of cancer patients., (Copyright © 2019 Elsevier B.V. All rights reserved.)

The research progress in the centrifugal microfluidic platform provides great opportunities for simple and effective analytical measurements in a variety of areas including biomedical engineering. In this study, we propose an optical reader that can measure the transmittance in a very sensitive and rapid manner on a hybrid paper-polymer centrifugal disc platform. This device enables real-time monitoring of multiple samples by measuring the absorbance of the light transmitted through the paper integrated on the disc between the light emitting diode (LED) and the photodiode (PD) regardless of the ambient light condition. To confirm its efficiency, we analyzed one of the blood's important indicators, glucose in a successful manner within 10 s without any additional complex image analysis. In addition, we discussed the results by comparing with the reflectance-based methods and with those of the previously reported studies by introducing a figure of merit to evaluate the performance of the assay., (Copyright © 2018 Elsevier B.V. All rights reserved.)

Paper-based sorptive phases (PSPs) are functional planar materials with a demonstrated potential in analytical sample preparation. This article describes the synthesis of a polyimide coated paper by an in-situ imidization at a high temperature. Polyimides (PI) are synthesized in two subsequent steps where a hydrophilic polymer, in this case, poly(amic acid) (PAA), is formed as an intermediate product. PAA is finally transformed into hydrophobic PI by thermal curing at 180 °C. The synthesis of PI-paper takes advantage of this two-step procedure. In the first stage, a segment of filter paper is immersed into an aqueous PAA solution. After the solvent evaporation, the paper is heated at 180 °C for 1 h inducing the formation of the hydrophobic PI over the cellulose fibers. Infrared spectroscopy has been used to characterize the synthesized materials by defining a coverage factor F. The hydrophobicity of the materials has been studied using an aqueous methylene blue solution as a marker. To fully demonstrate the usefulness of the material in the sample preparation field, the extraction of methadone from oral fluid (OF) samples has been considered as a model analytical problem. The main variables affecting the synthesis (PAA concentration on the precursor solution and number of dips) and the extraction (elution and extraction times) have been fully evaluated. Working under the optimum conditions, a limit of quantification of 9 µg/L, intraday and interday precision better than 14.6%, and accuracy in the range of 87-108% were obtained., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2022 The Author(s). Published by Elsevier B.V. All rights reserved.)

Point-of-care (POC) detection and diagnostic platforms provide critical information about health and safety conditions in austere and resource-limited settings in which medical, military, and disaster relief operations are conducted. In this work, low-cost paper materials commonly used in POC devices are coated with liquid-infused polymer surfaces and folded to produce geometries that precisely localize complex liquid samples undergoing concentration by evaporation. Liquid-infused polymer surfaces were fabricated by infusing silicone-coated paper with a chemically compatible polydimethylsiloxane oil to create a liquid overlayer. Tests on these surfaces showed no remaining bacterial cells after exposure to a sliding droplet containing a concentrated solution of Escherichia coli or Staphylococcus aureus, while samples without a liquid layer showed adhesion of both microdroplets and individual bacterial cells. Folding of the paper substrates with liquid-infused polymer surfaces into several functional 3D geometries enabled a clean separation and simultaneous concentration of a liquid containing rhodamine dye into discrete, predefined locations. When used with bacteria, which are known for their ability to adhere to nearly any surface type, functional geometries with liquid-infused polymer surfaces concentrated the cells at levels significantly higher than geometries with dry control surfaces. These results show the potential of synergistically combining paper-based materials with liquid-infused polymer surfaces for the manipulation and handling of complex samples, which may help the future engineering of POC devices.

The development of high-efficiency enzyme mimics is of great significance in the field of biocatalysis. However, it remains challenging to design novel enzyme mimics with multiple enzyme-like activities, excellent stability, and good reusability. Herein, a facile molecular assembly strategy to construct dialdehyde cellulose (DAC) templated Cu-doped polydopamine (DAC@PDA/Cu) membrane with dual enzyme-like activities is presented. The Schiff base bonds formed between polydopamine (PDA) and DAC can not only accelerate the adhesion of PDA thin layer but also contribute to Cu-loading and high stability of DAC@PDA/Cu membrane. Importantly, the assembled DAC@PDA/Cu membrane exhibits a remarkable catalytic activity that is superior to the natural laccase along with high stability and excellent reusability. Moreover, the DAC@PDA/Cu membrane also demonstrates peroxidase-like activity, and it is successfully applied in the sensitive detection of ascorbic acid (AA). This work will provide a new paradigm methodology for rational design and practical applications of enzyme mimics based on bioinspired molecular assemblies., (© 2022 Wiley-VCH GmbH.)

Traditional skin care masks usually use a piece of paper to hold the aqueous essences, which are not environmentally friendly and not easy to use. While a paper-free mask is desired, it is faced with a dilemma of moisture holding and rapid release of encapsulated bioactive substances. Herein, a paper-free sprayable skin mask is designed from an intelligent material-a thermogel which undergoes sol-gel-suspension transitions upon heating-to solve this dilemma. A synthesized block copolymer of poly(ethylene glycol) and poly(lactide-co-glycolide) with appropriate ratios can be dissolved in water, and thus easily mixed with a biological substance. The mixture is sprayable. After spraying, a Janus film is formed in situ with a physical gel on the outside and a suspension on the inside facing skin. Thus, both moisture holding and rapid release are achieved. Such a thermogel composed of biodegradable amphiphilic block copolymers loaded with nicotinamide as a skin mask is verified to reduce pigmentation on a 3D pigmented reconstructed epidermis model and further in a clinical study. This work might be stimulating for investigations and applications of biodegradable and intelligent soft matter in the fields of drug delivery and regenerative medicine., (© 2022 Wiley-VCH GmbH.)

Fiber-reinforced polymer composites (FRPCs) present a promising solution for diverting waste generated by the pulp and paper industry from landfills. The global pulp and paper industry generated 110 million tons [...]

Fluorescent nanoparticles are widely exploited as probes in cell tracking, drug delivery systems and high-performance security devices nowadays. Herein, we report the synthesis of novel 7-acryloxycoumarin (7-AC) through modification reaction of 7-hydroxycoumarin with acryloyl chloride and its copolymerization with methyl methacrylate and glycidyl methacrylate to produce epoxy-functionalized fluorescent polymer nanoparticles through emulsion polymerization. Chemical modification of cellulose pulp papers with the as-prepared fluorescent latex nanoparticles was also assessed. Spherical nanoparticles with average particle size of 40-93 nm and their diffusion into cellulosic fibers with excellent wetting and coating were monitored. Fluorimetery analysis demonstrated that immobilization of 7-AC into the hydrophobic acrylic copolymer substrate enhanced its emission intensity significantly with respect to its molecularly solution due to the elimination of unwanted environmental effects and non-radiative processes such as probable internal conversions. The obtained products exhibited intensified fluorescence emission with potentiality of being used in anticounterfeiting inks and security documents., (Copyright © 2020 Elsevier Ltd. All rights reserved.)

Enzyme-based assays have been extensively used for the early diagnosis of disease-related biomarkers. However, these assays are time-consuming, resource-intensive, and infrastructure-dependent, which renders them unsuitable and impractical for use in resource-constrained areas. Thus, there is a strong demand for a biocompatible and potentially generalizable sensor that can rapidly detect cancer biomarkers at ultralow concentration. Herein, an enzyme-free, cost-efficient, and easy-to-use assay based on a novel approach that entails fluorescent molecularly imprinting conjugated polythiophenes (FMICPs) for cancer biomarkers detection is developed. The promising conjugated polythiophenes structure, with a PLQY as high as 55%, provides a straightforward, and affordable method for free-enzyme signal generation. More importantly, the feasibility of integrating printed-paper technology with a sensitive and cost-effective smartphone and portable prototype testing device that could be utilized for rapid point-of-care (POC) cancer diagnostics is successfully introduced. Significantly, the unique structure of FMICP nanofibers (FMICP NFs) displays superior performance with enhanced sensitivity that is 80 times higher than that of pristine FMICP. This assay could lower the limits of detection to 15 fg mL -1 and 3.5 fg mL -1 for α-fetoprotein (AFP) and carcinoembryonic antigen (CEA), respectively, which are three orders of magnitude exceeding that of the standard enzyme-based assay. Moreover, the developed sensors are successfully applied to the fast diagnosis of AFP in liver cancer patients and the FMICP and FMICP NFs results are in excellent agreement with those of clinical ELISA., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2020 Elsevier B.V. All rights reserved.)

Oceanic oil spill and the discharge of industrial oily wastewaters can cause significant threats to the ecological environment and human health. Herein, we design a durable TiO 2 /PDA-based superhydrophobic paper for efficient oil/water separation. Bioinspired from mussel adhesive proteins, the mechanical durability of the as-prepared superhydrophobic paper is enhanced by the deposition of polydopamine (PDA) onto cellulosic fibers via self-polymerization of dopamine. The TiO 2 /PDA-based superhydrophobic paper shows a high water contact angle of 168.2° and an oil contact angle of ∼0°, exhibiting excellent superhydrophobicity and superoleophilicity. Furthermore, the as-prepared superhydrophobic paper possesses excellent chemical stability, thermal stability, and mechanical durability in terms of being immersed in corrosive solutions and solvents and boiling water and being subjected to the sandpaper abrasion test, respectively. More importantly, the separation efficiency of the TiO 2 /PDA-based superhydrophobic paper for an oil/water mixture is 97.2%, and it maintains a separation efficiency above 94.3% even after 15 cyclic separation processes. Furthermore, the separation efficiency for water-in-oil emulsions is higher than 93.7% after 15 cyclic separation tests, showing its excellent recyclable stability for water-in-oil emulsions. Therefore, the rationally designed TiO 2 /PDA-based superhydrophobic paper shows great potential in the practical applications of self-cleaning, antifouling, and oil/water separation.

Hyaluronidase (HAase) is implicated in inflammation, cancer development, and allergic reaction. The detection of HAase is significantly important in clinical diagnosis and medical treatment. Herein, we propose a new principle for the development of equipment-free and label-free paper-based flow sensors based on the enzymatic hydrolysis-induced viscosity change in a stimuli-responsive polymer solution, which increases the water flow distance on the pH indicator paper. The detection of HAase is demonstrated as an example. This facile and versatile method can overcome the potential drawbacks of traditional hydrogel-based sensors, including complex preparation steps, slow response time, or low sensitivity. Moreover, it can also avoid the use of specialized instruments, labeled molecules, or functionalized nanoparticles in the sensors developed using the polymer solutions. Using this strategy, the detection of HAase is achieved with a limit of detection as low as 0.2 U/mL. Also, it works well in human urine. Additionally, the detection of tannic acid, which is an inhibitor of HAase, is also fulfilled. Overall, a simple, efficient, high-throughput, and low-cost detection method is developed for the rapid and quantitative detection of HAase and its inhibitor without the use of labeled molecules, synthetic particles, and specialized instruments. As only minimal reagents of HAase, HA, and paper are used, it is very promising in the development of commercial kits for point-of-care testing.

Microcystin has been causing serious environmental pollution; however, the recognition of such compounds is still challenging because of low abundance and coexisting interfering species. In this contribution, we develop a novel microfluidic paper-based colorimetric sensor by exploiting molecular imprinting technology and Fenton reaction for on-site microcystin-RR determination in complex water samples using a smartphone.

Traditional manufacturing methods and materials used to fabricate epidermal electronics for physiological monitoring, transdermal stimulation, and therapeutics are complex and expensive, preventing their adoption as single-use medical devices. This work describes the fabrication of epidermal, paper-based electronic devices (EPEDs) for wearable and implantable applications by combining the spray-based deposition of silanizing agents, highly conductive nanoparticles, and encapsulating polymers with laser micromachining. EPEDs are inexpensive, stretchable, easy to apply, and disposable by burning. The omniphobic character and fibrous structure of EPEDs make them breathable, mechanically stable upon stretching, and facilitate their use as electrophysiological sensors to record electrocardiograms, electromyograms, and electrooculograms, even under water. EPEDs can also be used to provide thermotherapeutic treatments to joints, map temperature spatially, and as wirelessly powered implantable devices for stimulation and therapeutics. This work makes epidermal electronic devices accessible to high-throughput manufacturing technologies and will enable the fabrication of a variety of wearable medical devices at a low cost.

This article describes the preparation and characterization of PEDOT-coated paper electrodes. Their specific behavior was investigated, especially the impact of electrode shape on the electrochemical properties. It was found that different electrode geometries promote different results, largely because of a potential drop in the bulk of the electrode material. More importantly, the suitability of these substrates for bio- and neurochemical analyses was investigated. The paper electrodes were found to offer better resistance to both protein and neurotransmitter foulings, in comparison to a planar electrode. Interestingly, long paper electrodes were more stable during sustained oxidation of dopamine and serotonin than short ones, possibly because of the conjunction of surface passivation and potential drop allowing for the site of oxidation to move along the electrode as fouling progresses., (© 2018 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Since the discovery of polydopamine (PDA), there has been a lot of progress on using this substance to functionalize many different surfaces. However, little attention has been given to prepare functionalized surfaces for the preparation of flexible electrochemical paper-based devices. After fabricating the electrodes on paper substrates, we formed PDA on the surface of the working electrode using a chemical polymerization route. PDA nanofilms on carbon were characterized by contact angle (CA) experiments, X-ray photoelectron spectroscopy, scanning electron microscopy, atomic force microscopy (topography and electrical measurements) and electrochemical techniques. We observed that PDA introduces chemical functionalities (RNH 2 and RC═O) that decrease the CA of the electrode. Moreover, PDA nanofilms did not block the heterogeneous electron transfer. In fact, we observed one of the highest standard heterogeneous rate constants (k s ) for electrochemical paper-based electrodes (2.5 ± 0.1) × 10 -3  cm s -1 , which is an essential parameter to obtain larger currents. In addition, our results suggest that carbonyl functionalities are ascribed for the redox activity of the nanofilms. As a proof-of-concept, the electrooxidation of nicotinamide adenine dinucleotide showed remarkable features, such as, lower oxidation potential, electrocatalytic peak currents more than 30 times higher when compared to unmodified paper-based electrodes and electrocatalytic rate constant (k obs ) of (8.2 ± 0.6) × 10 2  L mol -1  s -1 ., (© 2021 Wiley Periodicals LLC.)

In this work, we provided a novel strategy of antibody-free biomarker analysis by in-situ synthesized molecularly imprinted polymers (MIPs) on movable valve microfluidic paper-based electrochemical device (Bio-MIP-ePADs) for clinical detection of biomarkers. The newly movable valves on the device enable continuous and convenient delivery of fluid, which guarantee the performance for fabricating MIPs structure during long time electropolymerization. Moreover, this strategy can directly detect antigens by taking advantage of molecular imprinting on paper-based device, which greatly decreases the cost during clinical testing, reduces the tedious washing procedure and does not need to consider the preservation of the antibody in enzyme linked immunosorbent assay (ELISA). This feature makes the chip suitable for the on-site family treatment or commercial products. To further validate the applicability of this proposed method for clinical diagnostic testing, carcinoembryonic antigen (CEA) was applied as prototyping model target for the clinical analysis. The proposed Bio-MIP-ePADs were cheap, easy to prepare, disposable and provided reliable analysis by comparing with ELISA. We hope the application of this technology will open up a new avenue to the point-of-care testing (POCT)., (Copyright © 2019 Elsevier B.V. All rights reserved.)

17β-estradiol (17β-E 2 ) usually is used to promote the growth of animal. Abuse of 17β-E 2 has become a global food security problem, because the residues in foods can cause endocrine disorder through the food chain. A novel molecularly imprinted polymer (MIP) grafted paper-based method for the sensitive and specific detection of 17β-E 2 was reported in this work. Results showed that the MIP's optimum synthetic conditions were as follows: 12 mL of acetonitrile was chosen as the solvent; the molar ratio of template molecule, functional monomer and cross linker was 1:12:12. MIP synthesized had a good recognition ability, the limit of detection (LOD) of established detection method for milk and human urine samples could reach 0.25μgL -1 ., (Copyright © 2016 Elsevier Ltd. All rights reserved.)

The first paper-based polyion-sensitive optodes are reported. Dinonylnaphthalene sulfonic acid (a cation exchanger) and chromoionophore I (a lipophilic optical pH indicator) are printed on filter paper in the absence of any plasticizer and/or additional hydrophobic polymeric phase. The resulting optodes exhibit sensitive colorimetric response to polycations such as protamine but not to small inorganic cations because only polycations are able to form cooperative ion pairs with dinonylnaphthalenesulfonate adsorbed to the cellulose paper. The color change of the optode is recorded via an iPhone camera and analyzed by an iPhone App. The protamine-sensing optode platform is used to indirectly detect protease activity (trypsin) based on proteolytic digestion of protamine, and polyanions (pentosan polysulfate and heparin) based on the strong binding reaction of polyanions with protamine. The indirect sensing system is further simplified on a multilayer membrane device that consists of an optode paper site modified with buffer to prevent optode dependence on sample pH, and an underlying cellulose acetate filter membrane coated with protamine to eliminate addition of the indicator polycation into the sample. The detection of pentosan polysulfate concentrations in an undiluted urine sample is successfully demonstrated via this approach. Lastly, it is shown that plasticizer-free polyanion-sensitive optodes based on an adsorbed layer of quaternary ammonium type anion exchanger and a phenolic azo type proton chromoionophore can also be fabricated directly on cellulose paper strips.

Cellulose paper is an ideal diagnostic platform for low-cost, easily disposable and lightweight implementation, but requires surface modification to achieve detection with high sensitivity and specificity in complex media. In this work, a polymer-catechol conjugate containing a superhydrophilic nonfouling poly(carboxylbetaine) (pCB) and four surface-binding l-3,4-dihydroxyphenylalanine (DOPA) groups, pCB-(DOPA) 4 , were applied onto a paper-based sensor surface via a simple "graft-to" immersion process to render the surface with both nonfouling and protein functionalizable properties. This dip-coating technique is effective, convenient and robust as compared to the "graft-from" techniques reported previously with similar nonfouling properties. The coated paper sensor showed both increased analyte diffusion rate and improved sensitivity of glucose detection in human blood serum. The capability of pCB-(DOPA) 4 -modified paper sensor for specific antigen-antibody detection was demonstrated via the covalent immobilization of bovine serum albumin antibody (anti-BSA) and fibrinogen antibody (anti-Fg) onto the pCB-coated surface via simple 1-ethyl-3-(3-(dimethylamino)propyl)-carbodiimide and N-hydroxysuccinimide (EDC/NHS) chemistry.

Inkjet-printed PEDOT:PSS electrodes are shown to record cutaneous electrophysiological signals such as electrocardiograms via a simple finger-to-electrode contact. The recordings are of high quality and show no deterioration over a 3 month period, paving the way for the development of the next generation of low-cost, convenient-to-use healthcare monitoring devices., (© 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

We demonstrate that the molecular structure of a synthetic homopolypeptide that resembles the leg architecture of water strider insects is effective to impart flexible polymeric surfaces with superhydrophobic behavior. Filter paper (FP) and polyester (PET) were modified with a coating consisting of low-molecular weight α-helical poly(γ-stearyl-α,l-glutamate) (PSLG, M w = 4500 Da) homopolypeptide. PSLG-coated substrates displayed near to and superhydrophobic behavior (≥150°) as reflected by the contact angle values. Despite being physically adsorbed, the PSLG coating uniformly covered and was strongly adhered to the substrate surfaces. The thin coating layer displayed remarkable mechanical abrasion resistance and was insensitive to long-time exposure to ambient conditions. PLSG-coated textile fibers exhibited useful and interesting properties. Under an iron-containing load, PSLG-coated PET was able to float and "walk" on water when exposed to a magnet. The PSLG coating was able to reduce the adhesion of Escherichia coli, model Gram-negative bacteria. The results indicated that the molecular geometry of PSLG homopolypeptide, which possesses a α-helical backbone sprouting out of highly hydrophobic stearyl side chains, was the key feature responsible for the observed behaviors. This study is relevant for a broad range of potential applications: from crop and drinking water management in arid geographic areas to biomedical devices and implants.

Cellulose nanopaper (CNP) has been considered as a promising material with great application potential in diverse fields. However, the hydrophilic nature of CNP significantly limits its practical application. In order to improve its water resistance, we demonstrate a facile approach to functionalize CNP by impregnating it with chitosan (CS), followed by in situ polymerization of polypyrrole (PPy). The results indicate that the obtained CNP/CS/PPy shows excellent water resistance with the wet tensile strength of up to 80 MPa, which is more than 10 times higher than that of the pure CNP. Intriguingly, new features ( e.g. , electrical conductivity, antibacterial activity, and so forth) are achieved at the same time. The functionalized CNP/CS/PPy shows a high conductivity of 6.5 S cm -1 , which can be used for electromagnetic interference shielding applications with a high shielding performance of around 18 dB. In addition, the CNP/CS/PPy exhibits good antibacterial activity toward Staphylococcus aureus and Escherichia coli , with the bacterial reductions of 99.28 and 95.59%, respectively. Thus, this work provides a simple and versatile approach to functionalize CNP for achieving multifunctional properties.

Introduction. Utilization of chemical cellulose fillers in construction industry is one of the ways of processing unused wastes from pulp and paper industry. Decorative, finishing, and heat insulation materials are widely used as construction materials. This paper proposes various compositions and insulation materials characterized by compressive strength of not less than 10 MPa, water tightness of 0.8, and density of not over 600 kg/m3. The likely curing mechanism is studied for cement systems. The possible mechanism of hardening structures formation in the systems is discussed. Methodology. Corrugated fibreboard МS-5B waste is used as a filler, high-early strength cement М-500 (CEM 47.5) – as inorganic binder, and elemental sulfur, polyethylene terephthalate, cementmodified polyurethane (PU) with the addition of nanosized silicon oxide are used as a polymeric matrix. Infrared spectroscopy, terahertz time-domain spectroscopy (THz-TDS), and scanning electron microscopy are used for investigations. Cement samples undergo compressive strength, water tightness and water absorption testing. Results and discussion. Physical and mechanical properties obtained for composites with the paper filler and polymeric matrix based on cement-modified PU, are described, and testing results are compared with the experimental data obtained for materials based on other binders. It is found that the paper filler–cement-modified PU composition is consistent with the purposes of this research. The understanding is improved for the curing mechanism of the polymeric matrix–paper filler system. The THz-TDS data demonstrate a correlation between the spectral transmission and thermal conductivity and density of synthesized heat insulation materials. Conclusion. Synthesized is the effective heat insulation material with relatively high compressive strength, low density, and high tightness to water. Scientific understanding of the curing mechanism is improved.

Devices based on rapid, paper-based, isothermal nucleic acid amplification techniques have recently emerged with the potential to fill a growing need for highly sensitive point-of-care diagnostics throughout the world. As this field develops, such devices will require optimized materials that promote amplification and sample preparation. Herein, we systematically investigated isothermal nucleic acid amplification in materials currently used in rapid diagnostics (cellulose paper, glass fiber, and nitrocellulose) and two additional porous membranes with upstream sample preparation capabilities (polyethersulfone and polycarbonate). We compared amplification efficiency from four separate DNA and RNA targets (Bordetella pertussis, Chlamydia trachomatis, Neisseria gonorrhoeae, and Influenza A H1N1) within these materials using two different isothermal amplification schemes, helicase dependent amplification (tHDA) and loop-mediated isothermal amplification (LAMP), and traditional PCR. We found that the current paper-based diagnostic membranes inhibited nucleic acid amplification when compared to membrane-free controls; however, polyethersulfone allowed for efficient amplification in both LAMP and tHDA reactions. Further, observing the performance of traditional PCR amplification within these membranes was not predicative of their effects on in situ LAMP and tHDA. Polyethersulfone is a new material for paper-based nucleic acid amplification, yet provides an optimal support for rapid molecular diagnostics for point-of-care applications.

Enzyme linked immunosorbent assay (ELISA) is one of the most widely used laboratory disease diagnosis methods. However, performing ELISA in low-resource settings is limited by long incubation time, large volumes of precious reagents, and well-equipped laboratories. Herein, we developed a simple, miniaturized paper/PMMA (poly(methyl methacrylate)) hybrid microfluidic microplate for low-cost, high throughput, and point-of-care (POC) infectious disease diagnosis. The novel use of porous paper in flow-through microwells facilitates rapid antibody/antigen immobilization and efficient washing, avoiding complicated surface modifications. The top reagent delivery channels can simply transfer reagents to multiple microwells thus avoiding repeated manual pipetting and costly robots. Results of colorimetric ELISA can be observed within an hour by the naked eye. Quantitative analysis was achieved by calculating the brightness of images scanned by an office scanner. Immunoglobulin G (IgG) and Hepatitis B surface Antigen (HBsAg) were quantitatively analyzed with good reliability in human serum samples. Without using any specialized equipment, the limits of detection of 1.6 ng/mL for IgG and 1.3 ng/mL for HBsAg were achieved, which were comparable to commercial ELISA kits using specialized equipment. We envisage that this simple POC hybrid microplate can have broad applications in various bioassays, especially in resource-limited settings.

A modular, general method for trapping enzymes within the voids of paper, without chemical activation of cellulose, is reported. Glucose oxidase and peroxidase were crosslinked with poly(acrylic acid) via carbodiimide chemistry, producing 3-dimensional networks interlocked in cellulose fibers. Interlocking prevented enzyme activity loss and enhanced the washability and stability.

We introduce Synthetic Microfluidic Paper, a novel porous material for microfluidic applications that consists of an OSTE polymer that is photostructured in a well-controlled geometry of slanted and interlocked micropillars. We demonstrate the distinct benefits of Synthetic Microfluidic Paper over other porous microfluidic materials, such as nitrocellulose, traditional paper and straight micropillar arrays: in contrast to straight micropillar arrays, the geometry of Synthetic Microfluidic Paper was miniaturized without suffering capillary collapse during manufacturing and fluidic operation, resulting in a six-fold increased internal surface area and a three-fold increased porous fraction. Compared to commercial nitrocellulose materials for capillary assays, Synthetic Microfluidic Paper shows a wider range of capillary pumping speed and four times lower device-to-device variation. Compared to the surfaces of the other porous microfluidic materials that are modified by adsorption, Synthetic Microfluidic Paper contains free thiol groups and has been shown to be suitable for covalent surface chemistry, demonstrated here for increasing the material hydrophilicity. These results illustrate the potential of Synthetic Microfluidic Paper as a porous microfluidic material with improved performance characteristics, especially for bioassay applications such as diagnostic tests.

Flexible paper-based nanocomposites dielectrics are of crucial importance in electrical insulation and advanced electrical power systems. In this work, a novel nanofibrillated cellulose/aramid fibrid (NFC/AF) composite was fabricated by vacuum-assisted filtration process. In order to improve the dielectric property of the composites, carboxylated nano-SiO 2 was chemically coated onto aramid fibrid via molecular self-assembly with the aid of phosphoric acid (PA) pretreatment and subsequent polyethyleneimine (PEI) functionalization. It was found that composites prepared by NFC and (PEI/SiO 2 )-modified AF (after crosslinking) ((PEI/SiO 2 )-AF) showed dense structure, which was mainly due to enhanced interfacial interaction between AF and NFC. Consequently, NFC/(PEI/SiO 2 )-AF paper-based composites showed better tensile toughness (∼6 % elongation at break) and mechanical strength (∼36.28 MPa), in comparison with NFC/AF. More importantly, the electrical insulation performance and thermal stability of the composites were significantly improved. Accordingly, this work provides a facile approach to fabricate high-performance dielectric composites especially for high-temperature electrical insulation applications., Competing Interests: Declaration of Competing Interest We declare that there is no conflict of interest., (Copyright © 2020 Elsevier Ltd. All rights reserved.)

A graphene and poly (3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) modified conductive paper-based electrochemical impedance spectroscopy (EIS) aptasensor has been successfully fabricated by a simple and continuous coating process. A graphene/PEDOT:PSS modified paper electrode forms the nanocomposite providing a conductive and sensitive substrate for further aptamer functionalization of the biosensor. This low-cost paper-based aptasensor exhibits its sensitivity to carcinoembryonic antigens (CEA) in standard buffer solutions and human serum samples in a linear range of 0.77-14 ng·mL -1 . The limit of detection (LOD) is found to be 0.45 ng·mL -1 and 1.06 ng·mL -1 for CEA in both samples, separately. This aptamer-based sensing device was also evaluated and received a good correlation with the immunoassay detection method. The proposed paper-based aptasensor has demonstrated its potential as a rapid simple point-of-care analytical platform for early cancer diagnosis in less developed areas where manufacturing facilities, analytical instruments, and trained specialists are limited.

Recycling hazardous wastes to produce value-added products is becoming essential for the sustainable progress of our society. Herein, highly porous carbon (1625 m(2)  g(-1)) is synthesized using waste tires as the precursor and used as a supercapacitor electrode material. The narrow pore-size distribution and high surface area led to good charge storage capacity, especially when used as a three-dimensional nanoscaffold to polymerize polyaniline (PANI). The composite paper was highly flexible, conductive, and exhibited a capacitance of 480 F g(-1) at 1 mV s(-1) with excellent capacitance retention of up to 98% after 10,000 charge/discharge cycles. The high capacitance and long cycle life were ascribed to the short diffusional paths, uniform PANI coating, and tight confinement of the PANI in the inner pores of the tire-derived carbon through π-π interactions, which minimized the degradation of the PANI upon cycling. We anticipate that the same strategy can be applied to deposit other pseudocapacitive materials to achieve even higher electrochemical performance and longer cycle life-a key challenge for redox active polymers., (© 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

A simple and low-cost fabrication method for paper-based diagnostic devices (PBDDs) is described in this study. Street-available polymer solutions were screen printed onto filter papers to create hydrophobic patterns for fluidic channels. In order to obtain fully functional hydrophobic patterns for fluids, the original polymer solutions were diluted with butyl acetate to yield a suitable viscosity range between 30-200 cP for complete patterning on paper. Typical pH and glucose tests with color indicators were performed on the screen printed PBDDs. Images of the PBDDs were analyzed by computers to obtain calibration curves for pH between 2 and 12 and glucose concentration ranging from 10-1000 mmol dm(-3). Detection of formaldehyde in acetone was also carried out to show the possibility of using this PBBD for analytical detection with organic solvents. An exemplar PBDD with simultaneous pH and glucose detection was also used to demonstrate the feasibility of applying this technique for realistic diagnostic applications.