Search

A film-forming system (FFS) represents a convenient topical dosage form for drug delivery. In this study, a non-commercial poly(lactic-co-glycolic acid) (PLGA) was chosen to formulate an FFS containing salicylic acid (SA) and methyl salicylate (MS). This unique combination is advantageous from a therapeutic point of view, as it enabled modified salicylate release. It is beneficial from a technological perspective too, because it improved thermal, rheological, and adhesive properties of the in situ film. DSC revealed complete dissolution of SA and good miscibility of MS with the polymer. MS also ensures optimal viscoelastic and adhesive properties of the film, leading to prolonged and sustained drug release. The hydrolysis of MS to active SA was very slow at skin pH 5.5, but it apparently occurred at physiological pH 7.4. The film structure is homogeneous without cracks, unlike some commercial preparations. The dissolution study of salicylates revealed different courses in their release and the influence of MS concentration in the film. The formulated PLGA-based FFS containing 5 % SA and 10 % MS is promising for sustained and prolonged local delivery of salicylates, used mainly for keratolytic and anti-inflammatory actions and pain relief., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

In-situ forming poly(lactic-co-glycolic acid) (PLGA) implants offer a great potential for controlled drug delivery for a variety of applications, e.g. periodontitis treatment. The polymer is dissolved in a water-miscible solvent. The drug is dissolved or dispersed in this solution. Upon contact with aqueous body fluids, the solvent diffuses into the surrounding tissue and water penetrates into the formulation. Consequently, PLGA precipitates, trapping the drug. Often, N-methyl-2-pyrrolidine (NMP) is used as a water-miscible solvent. However, parenteral administration of NMP raises toxicity concerns. The aim of this study was to identify less toxic alternative solvent systems for in-situ forming PLGA implants. Various blends of polyethylene glycol 400 (PEG 400), triethyl citrate (TEC) and ethanol were used to prepare liquid formulations containing PLGA, ibuprofen (as an anti-inflammatory drug) and/or chlorhexidine dihydrochloride (as an antiseptic agent). Implant formation and drug release kinetics were monitored upon exposure to phosphate buffer pH 6.8 at 37 °C. Furthermore, the syringeability of the liquids, antimicrobial activity of the implants, and dynamic changes in the latter's wet mass and pH of the release medium were studied. Importantly, 85:10:5 and 60:30:10 PEG 400:TEC:ethanol blends provided good syringeability and allowed for rapid implant formation. The latter controlled ibuprofen and chlorhexidine release over several weeks and assured efficient antimicrobial activity. Interestingly, fundamental differences were observed concerning the underlying release mechanisms of the two drugs: Ibuprofen was dissolved in the solvent mixtures and partially leached out together with the solvents during implant formation, resulting in relatively pronounced burst effects. In contrast, chlorhexidine dihydrochloride was dispersed in the liquids in the form of tiny particles, which were effectively trapped by precipitating PLGA during implant formation, leading to initial lag-phases for drug release., Competing Interests: Declaration of competing interest The authors declare the following financial interests/personal relationships which may be considered as potential competing interests: The Editor-in-Chief of the journal (JS) is one of the co-authors of this article. The manuscript has been subject to all of the journal’s usual procedures, including peer review, which has been handled independently of the Editor-in-Chief. If there are other authors, they declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 The Authors. Published by Elsevier B.V. All rights reserved.)

Biodegradable polyesters are widely employed in the development of controlled release systems for peptide drugs. However, one of the challenges in developing a polyester-based delivery system for peptides is the acylation reaction between peptides and polymers. Peptide acylation is an important factor that affects formulation stability and can occur during storage, in vitro release, and after drug administration. This review focuses on the mechanisms and parameters that influence the rate of peptide acylation within polyesters. Furthermore, it discusses reported strategies to minimize the acylation reaction., (© 2024. The Author(s), under exclusive licence to Springer Science+Business Media, LLC, part of Springer Nature.)

Long-acting injectables (LAI) offer a cost-effective and patient-centric approach by reducing pill burden and improving compliance, leading to better treatment outcomes. Among various types of long-acting injectables, poly (lactic-co-glycolic acid) (PLGA) microspheres have been extensively investigated and reported in the literature. However, microsphere formulation development is still challenging due to the complexity of PLGA polymer, formulation screening, and processing, as well as time-consuming and cumbersome physicochemical characterization. A further challenge is the limited availability of drug substances in early formulation development. Therefore, there is a need to develop novel and advanced tools that can accelerate the early formulation development. In this manuscript, a novel comprehensive physicochemical characterization approach was developed by integrating Raman microscopy and the machine learning process. The physicochemical properties such as drug loading, particle size and size distribution, content uniformity/heterogeneity, and drug polymorphism of the microspheres can be obtained in a single run, without requiring separate methods for each attribute (e.g., liquid chromatography, particle size analyzer, thermal analysis, X-ray powder diffraction). This approach is non-destructive and can significantly reduce material consumption, sample preparation, labor work, and analysis time/cost, which will greatly facilitate the formulation development of PLGA microsphere products. In addition, the approach will potentially be beneficial in enabling automated high throughput screening of microsphere formulations., (Copyright © 2023. Published by Elsevier B.V.)

Remote loading microencapsulation of peptides into polymer microspheres without organic solvent represents a promising alternative to develop long-acting release depots relative to conventional encapsulation methods. Here, we formulated drug-free microspheres from two kinds of uncapped poly(lactide-co-glycolides) (PLGAs), i.e., ring-opening polymerized Expansorb ® DLG 50-2A (50/50, 11.2 kDa) and Expansorb ® DLG 75-2A (75/25, 9.0 kDa), and evaluated their potential capacity to remote-load and control the release of two model peptides, leuprolide and octreotide. Degradation and erosion kinetics, release mechanism, and storage stability was also assessed. As control formulations, peptide was loaded in the same PLGA 75/25 polymer by the conventional double emulsion-solvent evaporation method (W/O/W) and remote loaded in polycondensation poly(lactic-co-glycolic acid) 75/25 (Wako 7515, 14.3 kDa). Loading content of 6.7%-8.9% w/w (~ 67%-89% encapsulation efficiency (EE)) was attained for octreotide, and that of 9.5% w/w loading (~ 95% EE) was observed for leuprolide, by the remote loading paradigm. Octreotide and leuprolide were both slowly and continuously released in vitro from the remote-loaded Expansorb ® DLG 75-2A MPs for over 56 days, which was highly similar to that observed from traditionally-loaded formulations by W/O/W (8.8% loading, 52.8% EE). The faster release kinetics was observed for the faster degrading PLGA 50/50 remote-loaded Expansorb ® DLG 50-2A MPs relative to microspheres from the PLGA 75/25 Expansorb ® DLG 75-2A. Despite slight differences in degradation kinetics, the release mechanism of octreotide from the Expansorb ® microspheres, whether remote loaded or by W/O/W, was identical as determined by release vs. mass loss curves. Octreotide acylation was also minimal (< ~ 10%) for this polymer. Finally, drug-free Expansorb ® DLG 75-2A MPs displayed excellent storage stability over 3 months. Overall, this work offers support for the use of ring-opening Expansorb ® PLGA-based microspheres to remote load peptides to create simple and effective long-acting release depots., (© 2023. Controlled Release Society.)

Long-acting injectable microspheres have been on the market for more than three decades, but if calculated on the brand name, only 12 products have been approved by the FDA due to numerous challenges in achieving a fully controllable drug release pattern. Recently, more and more researches on the critical factors that determine the release kinetics of microspheres shifted from evaluating the typical physicochemical properties to exploring the microstructure. The microstructure of microspheres mainly includes the spatial distribution and the dispersed state of drug, PLGA and pores, which has been considered as one of the most important characteristics of microspheres, especially when comparative characterization of the microstructure (Q3) has been recommended by the FDA for the bioequivalence assessment. This review extracted the main variables affecting the microstructure formation from microsphere formulation compositions and preparation processes and highlighted the latest advances in microstructure characterization techniques. The further understanding of the microsphere microstructure has significant reference value for the development of long-acting injectable microspheres, particularly for the development of the generic microspheres., Competing Interests: The authors report no conflicts of interest in this work., (© 2024 Wang et al.)

The formulation of drugs in poly(lactic-co-glycolic acid) (PLGA) nanoparticles can be accomplished by various methods, with nanoprecipitation and nanoemulsion being among the most commonly used manufacturing techniques to provide access to high-quality nanomaterials with reproducible quality. Current trends turned to sustainability and green concepts leading to a re-thinking of these techniques, particularly as the conventional solvents for the dissolution of the polymer suffer from limitations like hazards for human health and natural environment. This chapter gives an overview about the different excipients used in classical nanoformulations with a special focus on the currently applied organic solvents. As alternatives, the status quo of green, sustainable, and alternative solvents regarding their application, advantages, and limitations will be highlighted as well as the role of physicochemical solvent characteristics like water miscibility, viscosity, and vapor pressure for the selection of the formulation process, and for particle characteristics. New alternative solvents will be introduced for PLGA nanoparticle formation and compared regarding particle characteristics and biological effects as well as for in situ particle formation in a matrix consisting of nanocellulose. Conclusively, new alternative solvents are available that present a significant advancement toward the replacement of organic solvents in PLGA nanoparticle formulations., (© 2023. The Author(s), under exclusive license to Springer Nature Switzerland AG.)

Long-acting injectable formulations based on poly(lactide- co -glycolide) (PLGA) have been commercialized for over 30 years in at least 20 FDA-approved products. These formulations offer several advantages, including reduced dosing frequency, improved patient compliance, and maintenance of therapeutic levels of drug. Despite extensive studies, the inherent complexity of the PLGA copolymer still poses significant challenges associated with the development of generic formulations having drug release profiles equivalent to those of the reference listed drugs. In addition, small changes to PLGA physicochemical properties or the drug product manufacturing process can have a major impact on the drug release profile of these long-acting formulations. This work seeks to better understand how variability in the physicochemical properties of similar PLGAs affects drug release from PLGA solid implants using Ozurdex (dexamethasone intravitreal implant) as the model system. Four 50:50, acid-terminated PLGAs of similar molecular weights were used to prepare four dexamethasone intravitreal implants structurally equivalent to Ozurdex. The PLGAs were extensively characterized by using a variety of analytical techniques prior to implant manufacture using a continuous, hot-melt extrusion process. In vitro release testing of the four structurally equivalent implants was performed in both normal saline and phosphate-buffered saline (PBS), yielding drastically different results between the two methods. In normal saline, no differences in the release profiles were observed. In PBS, the drug release profiles were sensitive to small changes in the residual monomer content, carboxylic acid end group content, and blockiness of the polymers. This finding further underscores the need for a physiologically relevant in vitro release testing method as part of a robust quality control strategy for PLGA-based solid implant formulations.

Polymeric microparticles are widely used as drug delivery platforms either alone or embedded in more complex structures for regenerative medicine. Emulsion-solvent evaporation is the most extensively used technique for microparticles preparation. Despite the apparent simplicity of this method, there is no general procedure for producing microparticles of predictable characteristics (particle size, size distribution, encapsulation efficiency, and drug loading). Hybrid systems such as neurofuzzy logic allow identifying relationships between inputs and outputs, expressing the generated mathematical models through rules in linguistic format. In this work, the relationships between the variables involved in the emulsion-solvent evaporation process and the quality parameters of PLGA microparticles as drug delivery systems were established. Neurofuzzy logic software was able to generate models of high predictability (> 85%) for the microspheres properties namely particle size, size distribution, encapsulation efficiency and drug loading. Moreover, the generated sets of IF-THEN rules allowed to dictate general guidelines to better select the PLGA microparticles formulation parameters. This approach would be of great interest as a starting point to set-up protocols for the development of PLGA microparticles obtained by emulsion-solvent evaporation for many applications.

Setmelanotide (Imcivree™) was developed as a daily injectable therapeutic peptide for the treatment of rare forms of syndromic obesity, such as POMC deficiency and leptin receptor deficiency. The important option of poly(lactic-co-glycolic acid) (PLGA) controlled release microspheres has become more attractive for this class of drugs upon the discovery that net positively charged peptides can be remote-loaded rapidly from aqueous peptide solution into blank microspheres at high loading and encapsulation efficiency. Here we sought to remote-load setmelanotide in PLGA microspheres and examine its potential for long-term controlled release and body weight control. The influence of PLGA microsphere porosity was investigated with respect to morphology, drug loading, and in vitro release profiles. Increased density of the microspheres inhibited the progress of encapsulation of the dicationic peptide. A diet-induced obese murine model was then used to determine the pharmacokinetic profile and to evaluate long-term efficacy of an optimal formulation. Remote loaded PLGA formulations encapsulated setmelanotide as high as ∼63% (∼6.3% w/w loading) and exhibited slow and continuous peptide release over ∼6 weeks in vitro largely independent of microsphere porosity. The obtained in vivo release pattern from deconvolution of the pharmacokinetics after subcutaneous microsphere injection was consistent with the in vitro release profile but with a lower initial burst release and overall slightly faster release rate. After a single injection of remote-loaded setmelanotide, continuous long-term inhibition of food intake and body weight control was observed over 17 and 30 days, respectively. The improvement in body weight control over drug-free microsphere vehicle-treated control groups matched the observed PK profile. This study provides the first report of long-acting release formulation for 1-month controlled release of setmelanotide and body weight control in a diet induced obese murine model, and supports the further development of long-acting treatment options for obese patients., Competing Interests: Declaration of Competing Interest RDC, TKS, and the University of Michigan have equity in Courage Therapeutics, and RDC serves on the board of the company., (Copyright © 2023 Elsevier B.V. All rights reserved.)

Over 20 long-acting injectable formulations based on poly(lactide-co-glycolide) (PLGA) have been approved by the FDA to date. PLGA is a biodegradable polymer that can extend drug release from these dosage forms for up to six months after administration. Despite the commercial success of several of these formulations, there are still a limited number of products that utilize PLGA, and there are currently no generic counterparts of these products on the market. Significant technical challenges are associated with preparation of chemically and structurally equivalent formulations that yield an equivalent drug release profile to the reference listed drug (RLD) both in vitro and in vivo. In this work, Ozurdex (dexamethasone intravitreal implant) was used as a model system to explore how the manufacturing process of PLGA-based solid implants impacts the quality and performance of the dosage form. Control of implant structural characteristics, including diameter, internal porosity, and surface roughness, was required to maintain accurate unit dose potency. Implants were prepared by a continuous hot-melt extrusion process that was thoroughly characterized to show the importance of precise feeding control to meet dimensional specifications. Five extruder die designs were evaluated using the same hot-melt extrusion process to produce five structurally-distinct implants. The structural differences did not alter the in vitro drug release profile when tested in both normal saline and phosphate-buffered saline (pH 7.4); however, implant porosity was shown to impact the mechanical strength of the implants. This work seeks to provide insight into the manufacturing process of PLGA-based solid implants to support development of future novel and generic drug products., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 Elsevier B.V. All rights reserved.)

Due to the lack of pharmacopeia guidelines for injectable microspheres based on poly (D, L-lactide-co-glycolide) (PLGA), an internal method validation is a critical prerequisite for quality assurance. One of the essential issues of developing peptide-based drugs loaded PLGA microspheres is the precise determination of the amount of peptide drug entrapped in the microspheres. The aim of this study is the development and optimization of a method for measuring the drug content loading of PLGA microspheres using exenatide as a model peptide drug. Exenatide-loaded PLGA microspheres were prepared by a double emulsion solvent evaporation method. The extraction method to determine exenatide content in microspheres was optimized using Design of Experiments (DoE) approach. After the initial screening of six factors, using Fractional Factorial design (FFD), four of them, including type of organic solvent, buffer/organic solvent ratio (v/v), shaking time and pH, exhibited significant effects on the response, namely the exenatide loading, and a Box-Behnken design (BBD) was subsequently applied to obtain its optimum level. The optimum level for organic solvent volume, buffer/organic solvent ratio, shaking time, and pH were 4 ml, 1, 5.6 hrs, and pH 6, respectively. The exenatide content in microspheres under these conditions was 6.4 ± 0.0 (%w/w), whereas a value of 6.1% was predicted by the derived equation. This excellent agreement between the actual and the predicted value demonstrates that the fitted model can thus be used to determine the exenatide content., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 Elsevier B.V. All rights reserved.)

Different types of ibuprofen-loaded, poly (D,L lactic-co-glycolic acid) (PLGA)-based implants were prepared by 3D printing (Droplet Deposition Modeling). The theoretical filling density of the mesh-shaped implants was varied from 10 to 100%. Drug release was measured in agarose gels and in well agitated phosphate buffer pH 7.4. The key properties of the implants (and dynamic changes thereof upon exposure to the release media) were monitored using gravimetric measurements, optical microscopy, Differential Scanning Calorimetry, Gel Permeation Chromatography, and Scanning Electron Microscopy. Interestingly, drug release was similar for implants with 10 and 30% filling density, irrespective of the experimental set-up. In contrast, implants with 100% filling density showed slower release kinetics, and the shape of the release curve was altered in agarose gels. These observations could be explained by the existence (or absence) of a continuous aqueous phase between the polymeric filaments and the "orchestrating role" of substantial system swelling for the control of drug release. At lower filling densities, it is sufficient for the drug to be released from a single filament. In contrast, at high filling densities, the ensemble of filaments acts as a much larger (more or less homogeneous) polymeric matrix, and the average diffusion pathway to be overcome by the drug is much longer. Agarose gel (mimicking living tissue) hinders substantial PLGA swelling and delays the onset of the final rapid drug release phase. This improved mechanistic understanding of the control of drug release from PLGA-based 3D printed implants can help to facilitate the optimization of this type of advanced drug delivery systems., (Copyright © 2023 Elsevier B.V. All rights reserved.)

Purpose: Biodegradable poly(lactide-co-glycolide) (PLGA) microparticles loaded with either risperidone or naltrexone were prepared from an emulsification homogenization process. The objective of this study was to determine the impact the post-treatment temperature has on the properties and subsequent performance of the microparticles., Methods: The post-treatment temperature of an ethanolic solution was characterized from 10 ~ 35ºC for the naltrexone and risperidone micropartilces., Results: The wash temperature resulted in a typical triphasic in vitro release pattern at low wash temperatures or a biphasic pattern consisting of an elevated release rate at higher post-treatment temperatures. The post-treatment temperature largely influences the particle morphology, residual solvent levels, glass transition temperature, and drug loading and is molecule dependent, whereby these characteristics subsequently influence the drug release rate., Conclusion: The study highlights the importance of both the post-treatment process and control during manufacturing to obtain a formulation within the desired product profile., (© 2023. The Author(s), under exclusive licence to Springer Science+Business Media, LLC, part of Springer Nature.)

Poly(lactic-co-glycolic acid) (PLGA) microspheres are a sustained-release drug delivery system with several successful commercial products used for the treatment of a variety of diseases. By utilizing PLGA polymers with different compositions, therapeutic agents can be released over durations varying from several weeks to several months. However, precise quality control of PLGA polymers and a fundamental understanding of all the factors associated with the performance of PLGA microsphere formulations remains challenging. This knowledge gap can hinder product development of both innovator and generic products. In this review, variability of the key release controlling excipient (PLGA), as well as advanced physicochemical characterization techniques for the PLGA polymer and PLGA microspheres are discussed. The relative merits and challenges of different in vitro release testing methods, in vivo pharmacokinetic studies, and in vitro-in vivo correlation development are also summarized. This review is intended to provide an in-depth understanding of long-acting microsphere products and consequently facilitate the development of these complex products., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 Elsevier B.V. All rights reserved.)

Mathematical models are used to characterize and optimize drug release in drug delivery systems (DDS). One of the most widely used DDS is the poly(lactic-co-glycolic acid) (PLGA)-based polymeric matrix owing to its biodegradability, biocompatibility, and easy manipulation of its properties through the manipulation of synthesis processes. Over the years, the Korsmeyer-Peppas model has been the most widely used model for characterizing the release profiles of PLGA DDS. However, owing to the limitations of the Korsmeyer-Peppas model, the Weibull model has emerged as an alternative for the characterization of the release profiles of PLGA polymeric matrices. The purpose of this study was to establish a correlation between the n and β parameters of the Korsmeyer-Peppas and Weibull models and to use the Weibull model to discern the drug release mechanism. A total of 451 datasets describing the overtime drug release of PLGA-based formulations from 173 scientific articles were fitted to both models. The Korsmeyer-Peppas model had a mean Akaike Information Criteria (AIC) value of 54.52 and an n value of 0.42, while the Weibull model had a mean AIC of 51.99 and a β value of 0.55, and by using reduced major axis regression values, a high correlation was found between the n and β values. These results demonstrate the ability of the Weibull model to characterize the release profiles of PLGA-based matrices and the usefulness of the β parameter for determining the drug release mechanism., Competing Interests: Declaration of Competing Interest The authors declare the following financial interests/personal relationships which may be considered as potential competing interests: ‘Alejandro Perez Larios reports financial support was provided by University of Guadalajara Los Altos University Center. There are not additional relationships or activities to declare.’, (Copyright © 2023 Elsevier B.V. All rights reserved.)

Ozurdex is an FDA-approved sustained-release, biodegradable implant formulated to deliver the corticosteroid dexamethasone to the posterior segment of the eye for up to 6 months. Hot-melt extrusion is used to prepare the 0.46 mm × 6 mm, rod-shaped implant by embedding the drug in a matrix of poly(lactic-co-glycolic acid) (PLGA) in a 60:40 drug:polymer ratio by weight. In our previous work, the Ozurdex implant was carefully studied and reverse engineered to produce a compositionally and structurally equivalent implant for further analysis. In this work, the reverse-engineered implant was thoroughly characterized throughout the in vitro dissolution process to elucidate the mechanisms of controlled drug release. The implant exhibited a triphasic release profile in 37 °C normal saline with a small burst release (1-2 %), a one-week lag phase with limited release (less than 10 %), and a final phase where the remainder of the dose was released over 3-4 weeks. The limited intermolecular interaction between dexamethasone and PLGA rendered the breakdown of the polymer the dominating mechanism of controlled release. A close relationship between drug release and total implant mass loss was observed. Unique chemical and structural differences were seen between the core of the implant and the implant surface driven by diffusional limitations, autocatalytic hydrolysis, and osmotic effects., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023. Published by Elsevier B.V.)

The "biological identity" of nanoparticles (NPs) is governed by a shell consisting of various biomolecules that is formed upon exposure to biological media, the so-called biomolecule corona. Consequently, supplementation of cell culture media with e.g. different sera is likely to affect interactions between cells and NPs ex-vivo, especially endocytosis. We aimed to investigate the differential impact of human and fetal-bovine serum on the endocytosis of poly (lactic-co-glycolic acid) NPs by human peripheral blood mononuclear cells via flow cytometry. Furthermore, we employed different methods to inhibit endocytosis, providing mechanistic insights. The resulting biomolecule corona was characterized via denaturing gel electrophoresis. We found profound differences between human and fetal bovine serum regarding the endocytosis of fluorescently labeled PLGA nanoparticles by different classes of human leukocytes. Uptake by B-lymphocytes was particularly sensitive. We further present evidence, that these effects are mediated by a biomolecule corona. We demonstrate to our knowledge for the first time that the complement is an important contributor to the endocytosis of non-surface-engineered PLGA-nanoparticles prepared via emulsion solvent evaporation by human immune cells. Our data demonstrates that results obtained with xenogeneic culture supplements such as fetal bovine serum may have to be interpreted with caution., Competing Interests: Declaration of competing interest The authors declare that no conflict of interests exists., (Copyright © 2023. Published by Elsevier Inc.)

In previous work, we reported on the design of biodegradable rhein-loaded PLGA microparticles for the treatment of osteoarthritis. Considering that a formulation designed for intra-articular administration must meet sterility requirements to guarantee its safety, in this study the effect of gamma radiation sterilization on these microparticles was evaluated. The size, morphology, and surface characteristics of the microparticles and the encapsulation efficiency of rhein were not affected by the sterilization process. Although DSC and PXRD analyses suggested otherwise, rhein release profiles were not altered by gamma radiation. The release of rhein from the microparticles was fitted to a Gompertz model. In conclusion, the results of this study suggest that gamma radiation is a suitable method for the sterilization of rhein-loaded PLGA microparticles to enable their intra-articular administration in order to provide a therapeutic solution to patients suffering from chronic joint diseases., Competing Interests: Declaration of Competing Interest The authors declare that they have no interests that may have influenced the work reported in this document., (Copyright © 2022 American Pharmacists Association. Published by Elsevier Inc. All rights reserved.)

In this study, we present an innovative and facile in situ approach for extemporaneous preparation of sterile microparticles. An amazingly simple approach, in situ technology circumvents the stability, and scale up challenges as well as sterilization issues associated with long-acting particulate systems. Monophasic preconcentrates of donepezil base (DPZ), a model drug with a biodegradable polymer poly (DL-lactide-co-glycolide) (PLGA), with stabilizer were prepared by simple solution and sterilized by filtration (0.22 micron). The sterile preconcentrates when added to aqueous dextrose solution (total volume < 3 mL) generated ready-to-inject DPZ PLGA microparticles (DPZ-PLGA-MP) with high reproducibility, entrapment efficiency (> 80%), and size ~ 80 micron. DPZ micro suspension (DPZ-MS) with high precipitation efficiency (> 90%) and size ~ 80 micron was obtained in a similar manner omitting PLGA. XRD and DSC study confirmed decreased crystallinity in the presence of PLGA. No interaction between PLGA and DPZ was evident in the FTIR study. The microparticulate dispersions exhibited good in vitro injectability when tested using the texture analyzer (force < 5 N). When evaluated using the dialysis bag method (Himedia 12-14 kDa molecular weight cutoff), both microparticulate formulations exhibited controlled release up to 1 week in vitro. Further, low burst release of ~ 10% at the end of 6 h in the ex vivo chicken muscle study proposes great promise. Our data propose the facile extemporaneous generation of microparticles as a practical and promising approach for development of long-acting injectables. This facile approach could serve as platform technology for other drug candidates., (© 2023. The Author(s), under exclusive licence to American Association of Pharmaceutical Scientists.)

The present study deals with the development of dexamethasone (DM)-loaded implants using ester end-capped Resomer RG 502 poly(lactic acid-co-glycolic acid) (PLGA) (502), acid end-capped Resomer RG 502H PLGA (502H), and a 502H:502 mixture (3:1) via hot melt extrusion (HME). The prepared intravitreal implants (20 and 40% DM loaded in each PLGA) were thoroughly investigated to determine the effect of different end-capped PLGA and drug loading on the long-term release profile of DM. The implants were characterized for solid-state active pharmaceutical ingredient (APIs) using DSC and SWAXS, water uptake during stability study, the crystal size of API in the implant matrix using hot-stage polarized light microscopy, and in vitro release profile. The kinetics of PLGA release was thoroughly investigated using quantitative 1 H NMR spectroscopy. The polymorph of DM crystal was found to remain unchanged after the extrusion and stability study. However, around 3 times reduction in API particle size was observed after the HME process. The morphology and content uniformity of the RT-stored samples were found to be comparable to the initial implant samples. Interestingly, the samples (mainly 502H) stored at 40 °C and 75% RH for 30 d demonstrated marked deformation and a change in content uniformity. The rate of DM release was higher in the case of 502H samples with a higher drug loading (40% w/w). Furthermore, a simple digital in vitro DM release profile derived for the formulation containing a 3:1 ratio of 502H and 502 was comparable with the experimental release profile of the respective polymer mixture formulation. The temporal development of pores and/or voids in the course of drug dissolution, evaluated using μCT, was found to be a precursor for the PLGA release. Overall, the release profile of DM was found to be dependent on the PLGA type (independent of subtle changes in the formulation mass and diameter). However, the extent of release was found to be dependent on DM loading. Thus, the present investigation led to a thorough understanding of the physicochemical properties of different end-capped PLGAs and the underlying formulation microstructure on the release profile of a crystalline water-insoluble drug, DM, from the PLGA-based implant.

Pulmonary administration of biodegradable polymeric formulation is beneficial in the treatment of various respiratory diseases. For respiratory delivery, the polymer must be non-toxic, biodegradable, biocompatible, and stable. Poly D, L-lactic-co-glycolic acid (PLGA) is a widely used polymer for inhalable formulations because of its attractive mechanical and processing characteristics which give great opportunities to pharmaceutical industries to formulate novel inhalable products. PLGA has many pharmaceutical applications and its biocompatible nature produces non-toxic degradation products. The degradation of PLGA takes place through the non-enzymatic hydrolytic breakdown of ester bonds to produce free lactic acid and glycolic acid. The biodegradation products of PLGA are eliminated in the form of carbon dioxide (CO 2 ) and water (H 2 O) by the Krebs cycle. The biocompatible properties of PLGA are investigated in various in vivo and in vitro studies. The high structural integrity of PLGA particles provides better stability, excellent drug loading, and sustained drug release. This review provides detailed information about PLGA as an inhalable grade polymer, its synthesis, advantages, physicochemical properties, biodegradability, and biocompatible characteristics. The important formulation aspects that must be considered during the manufacturing of inhalable PLGA formulations and the toxicity of PLGA in the lungs are also discussed in this paper. Additionally, a thorough overview is given on the application of PLGA as a particulate carrier in the treatment of major respiratory diseases, such as cystic fibrosis, lung cancer, tuberculosis, asthma, and pulmonary hypertension., (© 2023. The Author(s), under exclusive licence to American Association of Pharmaceutical Scientists.)

Purpose: Complicated intra-abdominal infection (cIAI) management involves administering antibiotics that destroy the cell wall and the genesis of bacterial lipopolysaccharide (LPS). During the infectious state, the expression of transferrin receptors upregulates on the intestinal epithelial cells, which are considered the site of infection. In the present research, transferrin decorated poly(lactic-co-glycolic acid) (PLGA) nanoparticles (NPs) encapsulated moxifloxacin (MOX) were developed for possible targeting of the receptors in the colon., Significance: This study will explore more about the incorporation of transferrin as effective coating material in targeted drug delivery., Methods: Nanoparticles were prepared using nano-emulsification and surface modification with transferrin was done by layer-by-layer methodology and evaluated by powder X-ray diffraction (PXRD), differential scanning calorimeter (DSC), FTIR, SEM, antibacterial activity, and cellular uptake studies., Results: The formulated NPs exhibit a size of ≈170 nm, PDI ≈ 0.25, zeta potential ≈-4.0 mV, drug loading ≈ 6.8%, and entrapment efficiency of 82%. Transferrin-decorated NPs exhibit tailored release for almost 12 h and in vitro antibacterial activity for 14 h. The cellular uptake studies were done on a RAW264.7 cell line for better determination of transferrin uptake of fabricated NPs., Conclusion: The above study circumvents around the preparation of transferrin decorated PLGA encumbered MOX NPs intended for cIAI-induced sepsis. PLGA NPs provide tailored release of MOX with primary burst and followed by sustained release. These observations confines with antibacterial activity studies. The prepared transferrin-coated NPs were stable and effectively uptaken by RAW264.7 cells. However, future studies include the preclinical investigation of these NPs in sepsis-induced murine models.

Background: Rivaroxaban is widely used for long-term prevention and maintenance therapy of thromboembolic disorders. The existing oral dosage forms of rivaroxaban lead to poor patient adherence because of repeated daily administration. The aim of this study is to design long-acting rivaroxaban- loaded microspheres to reduce dosing frequency and improve patient compliance., Methods: Rivaroxaban-loaded microspheres were prepared using the emulsion-solvent evaporation method. The microspheres were evaluated in terms of morphology, particle size, drug loading and encapsulation efficiency, the physical state of the drug in the matrix, in vitro release/release mechanism, and in vivo pharmacokinetics in Sprague Dawley rats., Results & Discussion: Rivaroxaban-loaded microspheres presented spherical-shaped particles displaying a mean particle size of 89.3 μm, drug loading of 16.5% and encapsulation efficiency of 97.8%. The X-ray diffraction indicated that rivaroxaban existed in crystal form in the microspheres. in vitro release lasting approximately 50 days was characterized as a tri-phasic pattern: (1) an initial burst release, mainly due to the dissolution of drug particles with direct access to the microparticles' surface, (2) a "plateau" phase with a slow-release rate controlled by the diffusion and (3) a final, rapid drug release phase controlled by polymer erosion. Pharmacokinetic studies showed that rivaroxaban microspheres maintained a sustained release for more than 42 days., Conclusion: Rivaroxaban-loaded microspheres have great potential clinical advantages in reducing dosing frequency and improving patient compliance. The data obtained from this study could be used as scientific evidence for decision-making in future formulation development., (Copyright© Bentham Science Publishers; For any queries, please email at epub@benthamscience.net.)

The eye is an invulnerable organ with intrinsic anatomical and physiological barriers, hindering the development of a pioneer ocular formulation. The aim of this work was to develop an efficient ocular delivery system that can augment the ocular bioavailability of the antifungal drug, terconazole. Mesoporous silica microparticles, Syloid ® 244 FP were utilized as the carrier system for terconazole. Preliminary studies were carried out using different drug:Syloid ® weight ratios. The optimum weight ratio was mixed with various concentrations (30 and 60%w/w) of poly (lactic-co-glycolic acid) (PLGA), ester or acid-capped and with different monomers-ratio (50:50 and 75:25) using the nano-spray dryer. Results revealed the superiority of drug:Syloid ® weight ratio of 1:2 in terms of yield percentage (Y%), SPAN and drug content percentage (DC%). Furthermore, incorporation of PLGA with lower glycolic acid monomer-ratio significantly increased Y%. In contrast, increasing the glycolic acid monomer-ratio resulted in higher DC% and release efficiency percentage (RE%). Additionally, doubling PLGA concentration significantly reduced Y%, DC%, drug loading percentage (DL%) and RE%. Applying desirability function in terms of increasing DC%, DL% besides RE% and decreasing SPAN, the selected formulation was chosen for DSC, XRD and SEM investigations. Results confirmed the successful loading of amorphized terconazole on PLGA-modified Syloid ® microparticles. Moreover, pharmacokinetic studies for the chosen formulation on male Albino rabbits' eyes revealed a 2, 6.7 and 25.3-fold increase in mean residence time, C max and AUC 0-24 -values, respectively, compared to the drug suspension. PLGA-modified Syloid ® microparticles represent a potential option to augment the bioavailability of ocular drugs.

The present study aimed to determine the effects of sucrose on the physical stability, cellular entry pathways and functional efficacy of poly(lactic-co-glycolic acid) nanoparticles (PLGA-NPs). PLGA-NPs were synthesized in the absence or presence of 10 % sucrose, using HEI-101, an unmodified small interfering RNA (siRNA), as a drug model. The newly synthesized HEI-101-loaded PLGA-NPs (HEI-101-NPs) were exposed to repeated freeze-thaw cycles and iteratively tested over a six-month evaluation period. The effect of sucrose stabilization on HEI-101-NPs was independently tested in vitro for biocompatibility and cellular uptake in IMO-2B1 cells. Data analyses suggest that, without sucrose, freeze-thaw cycles of HEI-101-NPs resulted in increased particle diameter, increased polydispersity index, and reduced zeta potential. In contrast, a substantial improvement in the physical stability of HEI-101-NPs was observed in the presence of 10 % sucrose. The data revealed that the release of HEI-101 from the PLGA-NPs was governed by polymer erosion and drug diffusion. Data from cellular uptake study in IMO-2B1 cells demonstrated that, 10 % sucrose significantly reduced the inhibitory effect of nocodazole on the microtubule-dependent uptake of PLGA-NPs. In addition, the presence of 10 % sucrose seemed to lessen the inhibitory effect of sodium azide on the energy-dependent uptake of PLGA-NPs. Overall, the current data suggest that the cellular internalization of PLGA-NPs occurred through the polymerization of actin filaments under the control of the microtubules. Our findings reveal cryoprotective effect of 10 % sucrose on HEI-101-NPs that confers marked improvements in the stability, cellular uptake and efficiency for the delivery of biomolecules to inner ear cells., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2022 Elsevier B.V. All rights reserved.)

Coacervation is a commonly used method for protein and peptide drug microencapsulation using biodegradable or bioresorbable polymers. However, there is a lack of literature focused on microencapsulation of small molecule drugs using coacervation techniques. In addition, the apparatus used for this microencapsulation method has not been well-described. The objectives of the present work were to: (1) establish a reliable apparatus for coacervation microencapsulation; (2) investigate the impact of the viscosity of the silicone oil used in processing on microsphere performance; and (3) develop a reproducible in vitro release testing method for minocycline hydrochloride microspheres. Minocycline hydrochloride was chosen as the model drug and two compositionally equivalent microsphere formulations were prepared via coacervation using an in-house designed glass vessel assembly with a novel in-house customized paddle to achieve a relatively homogeneous particle size distribution. The critical physicochemical properties including drug loading, particle size, and morphology of the prepared microspheres and the commercial microspheres product (Arestin) were determined. In vitro release testing of the prepared microspheres as well as of Arestin was performed using a sample-and-separate method. The method showed good reproducibility and discriminatory ability. The physicochemical properties (such as particle size) as well as the in vitro release characteristics of the prepared microspheres were determined to be sensitive to the viscosity of the silicone oil used in coacervation processing. The silicone oil with higher viscosity (1000 cSt) used during the coacervation process resulted in smaller particle sized microspheres and consequently caused a higher initial burst release. Whereas, the silicone oil with lower viscosity resulted in larger sized microspheres with low burst release and a slower drug release rate., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2022 Elsevier B.V. All rights reserved.)

Lipid/polymer hybrid nanoparticles loaded with red fluorescent protein (RFP) encoded plasmid DNA (pDNA) was formulated using poly-lactic-co-glycolic acid (PLGA), cationic lipid DC-cholesterol and surfactant mPEG 2000 - DSPE. A lipid/ polymer ratio of 1: 10 at 1 mg/mL surfactant concentration was found to be optimal for producing nanoparticles with diameters of 100-120 nm that remained stable upon ultracentrifugation. The production of lipid/ polymer hybrid nanoparticles was investigated using microfluidics with a toroidal mixer design. Our results showed that the flow parameters significantly influenced the physicochemical characteristics of nanoparticles and loading of pDNA was only achieved at flow rate ratio (FRR) of 3: 1. The pDNA associated with nanoparticles was demonstrated to be structurally intact using gel electrophoresis, and the encapsulation efficiency (EE) was measured to be ∼65%. The prepared hybrid nanoparticles resulted in 20% of transfection efficacy in human embryonic kidney cells (HEK293T). This study demonstrated the potential of microfluidics in the development of hybrid nanoparticles for pDNA delivery, thus facilitating the clinical translation of DNA therapeutics., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2022 Elsevier B.V. All rights reserved.)

Bone infections are a serious problem to cure, as systemic administration of antibiotics is not very effective due to poor bone vascularization. Therefore, many drug delivery systems are investigated to solve this problem. One of the potential solutions is the delivery of antibiotics from poly(L-actide-co-glycolide) (PLGA) nanoparticles suspended in the gellan gum injectable hydrogel. However, the loading capacity and release kinetics of the system based on hydrophilic drugs (e.g., gentamycin) and hydrophobic polymers (e.g., PLGA) may not always be satisfying. To solve this problem, we decided to use hydrophobized gentamycin obtained by ion-pairing with dioctyl sulfosuccinate sodium salt (AOT). Herein, we present a comparison of the PLGA nanoparticles loaded with hydrophobic or hydrophilic gentamycin and suspended in the hydrogel in terms of physicochemical properties, drug loading capacity, release profiles, cytocompatibility, and antibacterial properties. The results showed that hydrophobic gentamycin may be combined in different formulations with the hydrophilic one and is superior in terms of encapsulation efficiency, drug loading, release, and antibacterial efficacy with no negative effect on the NPs morphology or hydrogel features. However, the cytocompatibility of hydrophobic gentamycin might be lower, consequently more extensive study on its biological properties should be provided to evaluate a safe dose.

Biodegradable poly(lactide-co-glycolide) (PLGA) microparticles have been used as long-acting injectable (LAI) drug delivery systems for more than three decades. Despite extensive use, few tools have been available to examine and compare the three-dimensional (3D) structures of microparticles prepared using different compositions and processing parameters, all collectively affecting drug release kinetics. Surface analysis after sequential semi-solvent impact (SASSI) was conducted by exposing PLGA microparticles to different semi-solvent in the liquid phase. The use of semi-solvent liquids presented practical experimental difficulties, particularly in observing the same microparticles before and after exposure to semi-solvents. The difficulties were overcome by using a new sequential semi-solvent vapor (SSV) method to examine the morphological changes of the same microparticles. The SASSI method based on SSV is called surface analysis of semi-solvent vapor impact (SAVI). Semi-solvents are the solvents that dissolve PLGA polymers depending on the polymer's lactide:glycolide (L:G) ratio. A sequence of semi-solvents was used to dissolve portions of PLGA microparticles in an L:G ratio-dependent manner, thus revealing different structures depending on how microparticles were prepared. Exposing PLGA microparticles to semi-solvents in the vapor phase demonstrated significant advantages over using semi-solvents in the liquid phase, such as in control of exposure conditions, access to imaging, decreasing the time for sequential exposure of semi-solvents, and using the same microparticles. The SSV approach for morphological analysis provides another tool to enhance our understanding of the microstructural arrangement of PLGA polymers. It will improve our comprehensive understanding of the factors controlling drug release from LAI formulations based on PLGA polymers., (Copyright © 2022 Elsevier B.V. All rights reserved.)

Nanometer- and submicrometer-sized fiber have been used as scaffolds for tissue engineering, because of their fundamental load-bearing properties in synergy with mechano-transduction. This study investigates a single biodegradable poly(lactic- co -glycolic acid) (PLGA) fiber's load-displacement behavior utilizing the nanoindentation technique coupled with a high-resolution in situ imaging system. It is demonstrated that a maximum force of ∼3 μN in the radial direction and displacement of at least 150% of fiber diameter should be applied to acquire the fiber's macroscopic mechanical properties for tissue engineering. The adhesion behavior of a single fiber is captured using a high-resolution camera. The digital image correlation (DIC) technique is adopted to quantify the adhesion force (∼25 μN) between the fiber and the tip. Adhesion force has also been quantified for the fiber after immersing in phosphate-buffered saline (PBS) to mimic the bioenvironment. A 4-fold increase in adhesion force after PBS treatment was observed due to water penetration and hydrolysis on the fiber's surface. A high similarity between mechanical properties of a single fiber and native tissues (elastic modulus of 10-25 kPa) and superior adhesion force (25-107.25 μN) was observed, which is excellent for promoting cell-matrix communication. Overall, this study examines the mechanics of a single fiber using innovative indentation and imaging processing techniques, disclosing its profound and striking roles in tissue engineering.

Poly(lactic-co-glycolic acid) PLGA (release controlling excipient) plays a dominant role on the performance of PLGA based long-acting parenterals. These types of drug products typically exhibit complex multi-phasic in vitro/in vivo release/absorption characteristics. In particular, owing to their large size, charged state, and hydrophilicity, peptide loaded microspheres can exhibit more complex release mechanisms. Accordingly, it is challenging to develop Level A in vitro-in vivo correlations (IVIVCs) for such complex long-acting parenterals. With the objective of gaining a better understanding of how to achieve IVIVCs for peptide loaded PLGA microspheres, formulations with similar as well as different release characteristics were prepared with PLGAs from different sources. Leuprolide acetate was selected as the model drug. Owning to the different physicochemical properties of the PLGAs (such as inherent viscosity, molecular weight and blockiness), the formulations exhibited significant differences in their critical quality attributes (such as particle size, porosity and pore size) and consequently had different in vitro and in vivo performance. Affirmative conventional IVIVCs were developed that were able to predict the in vivo performance using the corresponding in vitro release profiles. In addition, the developed conventional IVIVCs were able to discriminate between formulations with comparable in vitro/in vivo performance and those that had dissimilar in vitro/in vivo performance. The present work provides a comprehensive understanding of the influence of PLGA source variations on IVIVC development and predictability for peptide loaded PLGA microspheres., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2022 Elsevier B.V. All rights reserved.)

Peripheral nerve injury (PNI) exists widely and seriously affects patients' daily lives. However, the effect of nerve repair is still limited, and only 50% of patients can recover useful functions. To overcome these obstacles, collagen-coated poly(lactic-co-glycolic acid) (PLGA) conduits loaded with CBD-IGF-1 were designed and tested in vitro and in vivo. The physical characterization of the conduit was tested by scanning electron microscopy, and the static water contact angle, release rate, and nerve regeneration ability of the conduit were verified in a rat sciatic nerve injury model. The results showed that the PLGA/col/CBD-IGF-1 conduit had a rough surface and good hydrophilicity. CBD-IGF-1 could be released slowly from the PLGA/col/CBD-IGF-1 conduit. In the in vivo experiment, gait analysis and electrophysiological evaluation showed that the sciatic functional index and electrophysiological parameters were best in the group treated with the PLGA/col/CBD-IGF-1 conduit. The pathological examination results for the sciatic nerve and gastrocnemius muscle in the group treated with the PLGA/col/CBD-IGF-1 conduit were better than those in the other three groups. In short, this study demonstrated the beneficial effects of CBD-IGF-1 in nerve regeneration. The PLGA/col/CBD-IGF-1 conduit has therapeutic potential for use in the treatment of PNI., (© 2022 Wiley Periodicals LLC.)

Aim: This study aimed to investigate the effect of polymer type on solidification rate of PLGA polymeric microparticles and particle size/distribution of the emulsion droplets/hardened PLGA polymeric microparticles during solvent evaporation process using FBRM (Focussed Beam Reflectance Measurement)., Methods: PLGA polymeric microparticles were prepared by an O/W solvent evaporation method using various PLGA polymers, including PLGA Resomer® RG503H, RG502H and RG752H. The particle size mean, chord length distribution (CLD), and chord count of the emulsion droplets/hardened microparticles were monitored by FBRM. The morphology of polymeric microparticles were characterised by optical microscopy and scanning electron microscopy (SEM)., Results: The transformation of the emulsion droplets into solid microparticles occurred within the first 30 (± 1.04), 34 (± 1.15) and 37 (± 0.82) min and square weighted mean chord lengths are 64.08 (± 3.18), 52.36 (± 5.27) and 42.18 (± 4.61) µm when PLGA Resomer® RG503H, RG502H and RG752H were used respectively. Larger square weighted mean chord length of PLGA polymeric microparticles gave lower chord counts. PLGA RG752H microparticles gave smallest square weighted mean chord length and the chord counts was the highest. The CLDs measured by FBRM showed that a larger particle size mean gave longer CLD and a lower peak of particle number. SEM data revealed that the morphology of microparticles was influenced by type and physical properties of polymer., Conclusions: FBRM can be employed for online monitoring of the shift in the microparticle CLD and detect transformation of the emulsion droplets into solid microparticles during the solvent evaporation process. The microparticle CLD and transformation process were strongly influenced by polymer type.

The distribution of the active pharmaceutical ingredient (API) within polymer-based controlled release drug products is a critical quality attribute (CQA). It is crucial for the development of such products, to be able to accurately characterize phase distributions in these products to evaluate performance and microstructure (Q3) equivalence. In this study, polymer, API, and porosity distributions in poly(lactic-co-glycolic acid) (PLGA) microspheres were characterized using a combination of focused ion beam scanning electron microscopy (FIB-SEM) and quantitative artificial intelligence (AI) image analytics. Through in-depth investigations of nine different microsphere formulations, microstructural CQAs were identified including the abundance, domain size, and distribution of the API, the polymer, and the microporosity. 3D models, digitally transformed from the FIB-SEM images, were reconstructed to predict controlled drug release numerically. Agreement between the in vitro release experiments and the predictions validated the image-based release modelling method. Sensitivity analysis revealed the dependence of release on the distribution and size of the API particles and the porosity within the polymeric microspheres, as captured through FIB-SEM imaging. To our knowledge, this is the first report showing that microstructural CQAs in PLGA microspheres derived from imaging can be quantitatively and predictively correlated with formulation and manufacturing parameters., (Copyright © 2022 Elsevier B.V. All rights reserved.)

Bromelain (Br), a mixture of proteolytic enzymes from pineapple (Ananas comosus), has various therapeutic potentials; however, its low bioavailability has limited the clinical applications specifically in oral delivery as the most common convenient used route of administration. In the present study, a lipopolymeric nanoparticle (NP) containing Br was developed to enhance its stability and oral delivery efficiency. Firstly, Br was loaded into poly (D, L-lactide-co-glycolide acid) (PLGA) and PLGA-phosphatidylcholine (PLGA-PC) NPs using double emulsion solvent evaporation technique. Then, Br integrity and activity were investigated using SDS-PAGE and gelatin test. The stability and release profile of Br from synthetized NPs were evaluated at different pH values of the digestive system. Furthermore, cytotoxicity, cellular uptake, and the amount of Br passage from Caco-2 cells were explored. The results showed PLGA-PC-Br NPs had higher encapsulation efficiency (83%) compared to PLGA-Br NPs (50%). In addition, this NP showed more Br released in neutral (20.36%) and acidic (34%) environments compared to PLGA-Br NPs after 5 days. The delay in the release of Br from PLGA-PC-Br NPs versus the faster release of Br from PLGA-Br formulation could assure that an appropriate concentration of Br has reached the intestine. Intestinal absorption study demonstrated that lipid polymer NPs were able to pass through Caco-2 cells about 1.5 times more (98.4%) than polymeric NPs (70%). In conclusion, PLGA-PC NPs would be considered as a promising lipid-polymer nanocarrier for effective intestinal absorption of Br., (© 2022. The Author(s), under exclusive licence to Springer Science+Business Media, LLC, part of Springer Nature.)

Metal-HisTag coordination remote loading (MHCRL) of proteins in PLGA microspheres was previously developed to provide a useful tool for discovery and preclinical development of controlled release protein formulations. Here we describe optimization of MHCRL, including (1) reducing thermal stress, (2) decreasing the complexity and duration of the procedure, (3) increasing loading capacity, (4) increasing the penetration depth of protein, and (5) improving the release profile. Directly encapsulating ZnCO 3 as a Zn 2+ source for HisTag coordination, rather than remotely loading Zn 2+ , increased the Zn content ∼6-fold. Microspheres with directly encapsulated ZnCO 3 more deeply encapsulated green fluorescent protein and more efficiently encapsulated human serum albumin at protein loading solutions concentrations ≥100 μg/mL than remotely loaded Zn 2+ microspheres. Tributyl acetylcitrate plasticized microspheres in terms of decreasingT g , but led to a decrease in protein encapsulation efficiency. As such, the plasticizer was not deemed useful. The loading/healing cycles were reduced in time and temperature from 48 h/42 h at 43 °C to 2 h/6h at 37 °C while maintaining strong encapsulation efficiency, resulting in significantly improved protein stability. Immunoreactive protein was slowly released for months following a modest burst release. The improved microspheres and shorter, low-temperature encapsulation could be a valuable asset to drug discovery scientists interested in controlled release of delicate and/or costly biologic candidates., (Copyright © 2022. Published by Elsevier B.V.)

Rifampicin is one of the most commonly used antibiotics for treating tuberculosis, but shows low bioavailability and requires long-term administration, and hence its use may result in severe side effects. Encapsulation of rifampicin in polymeric reservoirs allows it to be administered locally and improves its pharmacological action. High rifampicin loading is crucial for obtaining an adequate therapeutic effect. Generally, the drug loading is a complex function of reservoir fabrication parameters. In the current work, we systematically varied the drug (rifampicin), polymer (PLGA) and dispersed phase contents as well as the solvent evaporation rate, particle size and number of particle washing cycles to characterize the challenges involved in encapsulating rifampicin. Physical insight into the low encapsulation efficiencies was provided, as well as an optimization of fabrication conditions to achieve higher drug loading levels. The particle solidification stage was found in the current work to be the most crucial step, where a significant amount of rifampicin was lost enhanced by its solubility in the aqueous medium. Increases in polymer concentration, solvent evaporation rate and particle size each significantly improved the drug loading by hindering of solvent-assisted escape of the drug. Based on our observation of the drug loading being extremely sensitive to the particle recovery and washing procedure after the solvent evaporation, most of the encapsulated rifampicin was concluded to be located on or very near the reservoir surface. Encapsulation could be significantly improved by fabricating multiple emulsions, especially double w/o/w emulsions, but the resultant particles were relatively large and porous, which might be a drawback for drug administration., (Copyright © 2022 Elsevier B.V. All rights reserved.)

Poly(lactic-co-glycolic acid) (PLGA) is among the most common of biodegradable polymers studied in various biomedical applications such as drug delivery and tissue engineering. To facilitate the understanding of the often overlooked impact of PLGA microstructure on important factors affecting PLGA performance, we measured four key parameters of 17 commonly used commercial PLGA polymers (Expansorb®, Resomer®, Purasorb®, Lactel®, and Wako®) by NMR spectroscopy. 1 HNMR and 13 CNMR spectra were used to determine lactic to glycolic ratio (L/G ratio), polymer end-capping, glycolic blockiness (Rc), and average glycolic and lactic block lengths (L G and L L ). In PLGAs with a labeled L/G ratio of 50/50 and acid end-capping, the actual lactic content slightly decreased as molecular weight increased in both Expansorb® and Resomer®. Whether or not acid- or ester-, termination of these PLGAs was confirmed to be consistent with their brand labels. Moreover, in the ester end-capped 75/25 L/G ratio group, the blockiness value (Rc) of Resomer® RG 756S (Rc: 1.7) was highest in its group; whereas for the 50/50 acid end-capped group, Expansorb® DLG 50-2A (Rc: 1.9) displayed notably higher values than their counterparts. Expansorb® 50-2E (L L : 2.5, L G : 2.6) and Resomer® RG 502 (L L : 2.6, L G : 2.5) showed the lowest block lengths, suggesting they may undergo a steadier hydrolytic process compared to random, heterogeneously distributed PLGA., (© 2021. Controlled Release Society.)

An extensive data set has been developed and used to further the progress of a model-informed design of controlled drug release. An improved drug-release model with mechanistic modeling of hydrolytic polymer degradation is used and validated by comparing model predictions to in vitro experiments. Combining parameter estimates from the literature with model fits to the data set, this study can aid in achieving a priori design of controlled drug release from a model PLGA release system. A systematic series of model release systems were formulated with FITC-labeled dextran, as a surrogate for biopharmaceuticals, in PLGA rods over a broad range of compositions. While general comparisons between the model and experiments were favorable, important discrepancies were identified for several formulations with significant first-phase drug release. Supported by cross-sectional fluorescence microscopy images of the FITC-dextran distribution within the rods, this first-phase release was attributed to a combination of two main factors: (1) percolation of the drug particles and (2) swelling of and pore formation in the rods due to water uptake. These observations indicate the importance of careful selection of the PLGA polymer grade when designing drug release systems but also reflect a need for better understanding of phenomena such as pore formation. Adapting model parameters, without modifying the physical processes included in the model, enabled accurate fitting of the experimental data for all formulations, highlighting the applicability of the model., (Copyright © 2021 American Pharmacists Association. Published by Elsevier Inc. All rights reserved.)

Nerve guidance channels (NGCs) promote cell-extracellular matrix (ECM) interactions occurring within the nanoscale. However, studies focusing on the effects of nanophase topography on neural cell functions are limited, and mostly concentrated on the sub-micron level (>100 nm) surface topography. Therefore, the aim of this study was to fabricate <100 nm sized structures on poly lactic-co-glycolic acid (PLGA) films used in NGC applications to assess the effects of nanophase topography on neural cell functions. For this purpose, nanopit surface arrays were fabricated on PLGA surfaces via replica molding method. The results showed that neural cell proliferation increased up to 65% and c-fos protein expression increased up to 76% on PLGA surfaces having nanophase surface arrays compared to the control samples. It was observed that neural cells spread to a greater extend and formed more neurite extensions on the nanoarrayed surfaces compared to the control samples. These results were correlated with increased hydrophilicity and roughness of the nanophase PLGA surfaces, and point toward the promise of using nanoarrayed surfaces in NGC applications., (© 2021 Wiley Periodicals LLC.)

In this experimental study, the biodegradable polylactide-co-glycolide (PLGA) microparticles (MP) loaded with the insoluble antidepressant mirtazapine were prepared by the simple o/w solvent evaporation method. The formation involved intrinsic variables, such as the content of polymer (700, 900 or 1200 mg), dichloromethane (5 or 10 ml) and/or drug (200 or 400 or 600 mg), and the volume of the aqueous emulsion phase (400, 600 or 800 ml). The influence of these parameters on the size and morphology of microparticles, encapsulation efficiency, and drug release behavior was observed. All MP were successfully prepared, and their size ranged between 165.34 ± 42.88 and 360.17 ± 121.59 &#956;m. MP exhibited prolonged drug release (days), and some profiles had multiphasic character. It was found that the samples prepared with a  higher initial amount of PLGA were bigger with prolonged lag time up to 34.3 hours. On the other hand, higher drug concentrations reduced the lag time. The external phase volume reduction and multiplication of dichloromethane amount prolonged the mirtazapine release and decreased the encapsulation efficiency. These observations were further confirmed by multivariate data analysis.

Aim: To develop a formulation in which calcium hydroxide (Ca(OH)₂) was successfully loaded into poly(lactic-co-glycolic acid) (PLGA) biodegradable nanoparticles (NPs) to be used in the field of endodontics as an intracanal medicament, including NP optimization and characterization, plus drug release profile of the NPs compared with free Ca(OH)₂. Additionally, the depth and area of penetration of the NPs inside the dentinal tubules of extracted teeth were compared with those of the free Ca(OH)₂., Methodology: Ca(OH)₂ NPs were prepared using the solvent displacement method. NPs was optimized with a central composite design to obtain a final optimized formulation. The morphology of the NPs was examined under transmission electron microscopy (TEM), and characterization was carried out using X-ray diffraction (XRD), Fourier transform infrared (FTIR) and differential scanning calorimetry (DSC). The drug release profile of the Ca(OH)₂ NPs and free Ca(OH)₂ was evaluated up to 48 h. Finally, the depth and area of penetration inside the dentinal tubules of extracted teeth were examined for both the Ca(OH)₂ NPs and free Ca(OH)₂ using the Mann-Whitney U test to determine any significant differences., Results: Utilizing the optimized formulation, the Ca(OH)₂ NPs had an average size below 200 nm and polydispersity index lower than 0.2, along with a highly negative zeta potential and suitable entrapment efficiency percentage. The spherical morphology of the Ca(OH)₂ NPs was confirmed using TEM. The results of the XRD, FTIR and DSC revealed no interactions and confirmed that the drug was encapsulated inside the NPs. The drug release profile of the Ca(OH)₂ NPs exhibited a prolonged steady release that remained stable up to 48 h with higher concentrations than the free Ca(OH)₂. After examination by confocal laser scanning microscopy, Ca(OH)₂ NPs had a significantly greater depth and area of penetration inside dentinal tubules compared with the free drug., Conclusions: Ca(OH)₂-loaded PLGA NPs were successfully optimized and characterized. The NPs exhibited a prolonged drug release profile and superior penetration inside dentinal tubules of extracted teeth when compared to Ca(OH) 2 ., (© 2021 International Endodontic Journal. Published by John Wiley & Sons Ltd.)

Minimally invasive treatment via injectable delivery of cells has drawn extensive attention for tissue regeneration because it reduces the need for substantial open surgery and fits tissue defects with complex shapes, making it a suitable option for repairing articular cartilage defects. This work presents an alkaline treatment method to fabricate open-porous poly (lactic-co-glycolic acid) microspheres (OPMs) as bone marrow stromal cells (BMSCs) carriers for cartilage regeneration. OPMs have better biodegradation property and the extended pores can provide easier access for cells to the internal space. The BMSCs cultured with OPMs can display enhanced cell proliferation, up-regulated expression of cartilage-related mRNAs and proteins, and improved cartilage regeneration in vitro and in vivo. These results highlight the advantage and potential of using OPMs fabricated via simple alkaline treatment as injectable stem cell carriers for cartilage regeneration through minimally invasive procedures., (© 2021 Wiley Periodicals LLC.)

To evaluate in vivo drug release profiles in beagle dogs, finasteride-loaded PLGA microspheres were prepared using a novel method of IVL-PPF Microsphere® microfluidic device. Briefly, the dispersed phase (PLGA and finasteride in dichloromethane) was mixed with the continuous phase (0.25% w/v PVA aqueous solution) in the parallelized microchannels. After lyophilization, the diameter of the microspheres was around 40 μm (PLGA 7502A or 5002A) and around 30 µm (PLGA/PLA02A mixture). Their CV and span values suggested a narrow size distribution in repeated batch preparations. The in vivo drug release from the PLGA microspheres exhibited three substantial phases: an initial burst, a moderate release, and then a plateau. The microspheres based on PLGA 7502A (75:25 co-polymer) demonstrated extended drug release for around 1 month with a minimized initial burst release compared to PLGA 5002A (50:50 co-polymer). Moreover, the in vivo drug release profile in beagle dogs was proportionally related to the amount of drug loading. Furthermore, the addition of PLA02A into the fabrication of the microsphere synergistically extended the drug release up to 3 months. These results demonstrated the value of this method to achieve uniform microspheres and extend the drug release properties with interpretative in vivo PK profiles., (Copyright © 2021 Elsevier B.V. All rights reserved.)

Poly(lactide-co-glycolide) polymers (PLGAs) have been used in many clinical formulations of injectable, long-acting formulations. Frequently, PLGAs having different lactide:glycolide (L:G) ratios, molecular weights (MWs), end-groups, and molecular structures have been used individually or in mixtures. To understand the properties of existing formulations made of PLGAs and to develop new formulations, understanding PLGA properties is essential. Yet, the separation of individual PLGA components from a mixture and their characterization has been challenging due to an incomplete understanding of PLGAs. This study focuses on separating PLGAs based on their molecular properties, such as L:G ratio, molecular weight, and comonomer sequence. The separation of PLGAs exploits the use of semi-solvents that dissolve only PLGAs having lactide contents (L%) above a certain threshold. More semi-solvents have been identified that show a specific transition L% between 50 and 100%. The mechanism study of semi-solvents indicates that semi-solvents, in general, prefer PLGAs with relatively higher L%, lower molecular weight, and higher G-L sequences as opposed to G-G sequences. The examination of a series of esters and ketones indicates that a solvent with lower molar volume is more effective as a semi-solvent. At a similar molar volume, esters are more effective than ketones in dissolving PLGAs with the same L:G ratio. The ability to separate and identify PLGA fractions allows better characterization of existing formulations and higher flexibility in designing new injectable, long-acting PLGA formulations., (Copyright © 2021 Elsevier B.V. All rights reserved.)

Objective: To develop poly(d,l-lactide- co -glycolide) (PLGA) microspheres to achieve controlled and sustained release of brexpiprazole in vivo ., Methods: Brexpiprazole microspheres were prepared by oil-in-water emulsion-solvent evaporation method and evaluated for morphology, particle size, encapsulation efficiency, drug loading, conformation and compatibility of drug and polymer, in vitro release, and in vivo pharmacokinetics. By establishing the relationship between in vitro and in vivo release, it helps identify the appropriate in vitro release conditions to explore release profiles of brexpiprazole microspheres., Results: Porous PLGA microspheres with near spherical morphology were obtained displaying an average diameter of 20.43 ± 0.06 μm, a drug loading capacity of 27.24 ± 0.33% and an encapsulation efficiency of 81.87 ± 1.07%. Fourier transform infrared spectroscopy (FTIR), powder X-ray diffraction (PXRD), and differential scanning calorimetry (DSC) analysis showed that some drugs encapsulated in the microspheres remained in the amorphous state and some were in the crystalline state. Different release setups resulted in different release kinetics. The dialysis release setup displayed a cumulative release of about 65% within 60 days, while the sample-and-separate setup showed a cumulative release of about 77% within 35 days. Per pharmacokinetic studies in rats, a burst phase in the plasma concentration-time curve was observed after intramuscular injection in the first 2 h followed by a clear zero-order release phase. Overall, brexpiprazole achieved in vivo sustained release from PLGA microspheres for up to 40 days., Conclusion: A PLGA microsphere loaded with brexpiprazole was successfully developed and demonstrated potential for extended-release of therapeutics for schizophrenia treatment.

A controlled drug release formulation based on the subcutaneous injection of poly (lactic-co-glycolic acid) (PLGA) microspheres loaded with finasteride was prepared and evaluated for monthly delivery. After selection of biodegradable polymer and polymer-to-finasteride ratio, the formulation was characterized. Scanning electron microscopy (SEM) and laser-light particle size analysis were used to examine the morphology, surface structure, and particle size. High‑performance liquid chromatography (HPLC) was used to determine the drug loading, while liquid chromatography with tandem mass spectrometry (LC-MS/MS) was employed to analyze plasma finasteride concentrations. Results showed that the PLGA microspheres were spherical and of an appropriate size. The formulation stably releases the drug from the microspheres and the release sustained for a month without burst release, which was the desired duration. In vivo pharmacokinetic-pharmacodynamic (PK-PD) studies were conducted in beagle dogs through the administration of PROPECIA® (as a reference drug) per oral and subcutaneous injection of the long-acting injectable microsphere formulation (LAIF) loaded with five different doses of finasteride. From the acquired plasma data, PK-PD models for both PROPECIA®-administered group and LAIFs-injected groups were developed and validated. PK-PD profiles of both groups were predicted for up to one month. The predicted PK-PD profile of all LAIFs showed the achievability of monthly delivery and pharmacological effects without burst release, compared to the simulated PK-PD profile of PROPECIA®. According to the predicted PK-PD profiles, the formulation loaded with 16.8 mg of finasteride was determined to be the optimal dose. The data obtained from the PK-PD model could be used as the basis for the estimation of a first-in-human dose of the formulation., (Copyright © 2021 Elsevier B.V. All rights reserved.)

Cell-penetrating peptides (CPPs) are known to interact with cell membranes and by doing so enhance cellular interaction and subsequent cellular internalization of nanoparticles. Yet, the early events of membrane interactions are still not elucidated, which is the aim of the present work. Surface conjugation of polymeric nanoparticles with cationic CPPs of different architecture (short, long linear, and branched) influences the surface properties, especially the charge of the nanoparticles, and therefore provides the possibility of increased electrostatic interactions between nanoparticles with the cell membrane. In this study, the physicochemical properties of CPP-tagged poly(lactic- co -glycolic acid) (PLGA) nanoparticles were characterized, and nanoparticle-cell interactions were investigated in HeLa cells. With the commonly applied methods of flow cytometry as well as confocal laser scanning microscopy, low and similar levels of nanoparticle association were detected for the PLGA and CPP-tagged PLGA nanoparticles with the cell membrane. However, single particle tracking of CPP-tagged PLGA nanoparticles allowed direct observation of the interactions of individual nanoparticles with cells and consequently elucidated the impact that the CPP architecture on the nanoparticle surface can have. Interestingly, the results revealed that nanoparticles with the branched CPP architecture on the surface displayed decreased diffusion modes likely due to increased interactions with the cell membrane when compared to the other nanoparticles investigated. It is anticipated that single particle approaches like the one used here can be widely employed to reveal currently unresolved characteristics of nanoparticle-cell interaction and aid in the design of improved surface-modified nanoparticles for efficient delivery of therapeutics.

In the present study, the anti-inflammatory lipophilic drug atorvastatin was encapsulated in poly(D,L-lactide-co-glycolide) (PLGA) using a sustainable method in comparison to the standard emulsion-diffusion-evaporation technique. For the sustainable method the organic solvent ethyl acetate was fully replaced by 400 g/mol poly(ethylene glycol) (PEG 400). Both techniques led to the formation of nanoparticles with comparable sizes of about 170 to 247 nm depending on the polymer type, with monomodal size distribution and negative zeta potential. All nanoparticles demonstrated a high biocompatibility in a shell-less hen's egg model and displayed an anti-inflammatory effect in human monocytes. The use of PEG 400 resulted in plasticizing effects and a lower crystallinity of the PLGA nanoparticles as determined by differential scanning calorimetry and Raman spectroscopy, which correlated with a faster drug release. Interestingly, the particles prepared by the sustainable method showed a crystallinity and drug release kinetics similar to nanoparticles made of PEG-PLGA using the standard method. Conclusively, the sustainable method is a fast and easy to perform technique suitable to prepare atorvastatin-loaded PLGA nanoparticles avoiding toxic and environmentally damaging drawbacks frequently associated with classical organic solvents., (Copyright © 2021. Published by Elsevier B.V.)