Search

It is challenging to greatly increase of the extraction selectivity and efficiency by stir bar sorptive extraction of ultra-trace polychlorinated biphenyls (PCBs) in complex environmental matrix, e.g., soils. To fulfill this purpose, one of the critical works is to prepare some coatings with high selectivity, adsorptive capacity and reusability. It is also important to develop some green, simple methods for preperation the coatings. In this work, a kind of highly efficient and bioactive coating based on hyperbranched aptamer (HB-Apt) was constructed via hybridization chain reaction (HCR). Then, the HB-Apt was coated on a magnetic stir bar and applied to headspace extraction of PCB72 and PCB106 in soils. The core-shell gold magnetic particles (Fe 3 O 4 @AuNPs, AuMNPs for short) was employed as the substrate to immobilize the HB-Apt. The extracted PCBs on the stir bar could be easily eluted in ethanol by stirring, and then sampled in gas chromatography-mass spectrometry (GC-MS) for qualification. The ultra-low detection limit (0.003-0.005 ng•g -1 ), good linearity (0.01-500 ng•g -1 , R 2 ≥0.994) and reproducibility (RSD: 4.58-6.53%) were obtained. Compared with the common aptamer coating, the HB-Apt coating exhibited good selectivity and higher extraction capacity. The results might be related to the fact that there are more aptamer fragments grated on the HB-Apt coating than those of the common aptamer coating. The magnetic stir bar can not only be employed for easy headspace extraction, but also facilitate separation and elution. Moreover, the coating could be recycled for at least 60 times before recoveries of the PCB72 and PCB106 in the spiked samples drop below 90%. All these indicated that the assay is simple, robust, environment friendly and promising for detection of trace PCBs in complex environmental samples., Competing Interests: Declaration of Competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2019. Published by Elsevier B.V.)

It's crucial to develop some simple, selective and rapid extraction pretreatments for detection of trace polychlorinated biphenyls (PCBs) residues in soils. Herein, a new magnetic mesoporous titanium dioxide@covalent organic frameworks (Fe 3 O 4 @mTiO 2 @COFs) composite coating was fabricated and adsorbed onto a Nd-Fe-B magnet for headspace sorptive extraction (HSSE) of seven indicative PCBs (PCB28, PCB52, PCB101, PCB118, PCB138, PCB153 and PCB180) in soils. The coating was assembled layer by layer using hydrothermal method. After being extracted by the magnetic stir bar, the adsorbed PCBs can be desorbed in thermal desorption unit (TDU) and measured by gas chromatography-mass spectrometry (GCMS). Under the optimal conditions, the limit of detection (S/N = 3) was measured less than 0.06 ng/g and the linear range was from 0.01 to 100 ng/g. The new coating exhibited good extraction capacity (its saturated adsorption amount was found to be 35 mg/g), selectivity and can be reused for at least 80 times with a recovery above 90%. The HSSE assay showed the following distinctive advantages: Firstly, the outer COFs coating has a uniform size of cavities (about 3.9 nm), thus PCBs (less than 2 nm) can freely pass through them, while the larger macromolecules can be effectively excluded. Secondly, the inner flower-like mTiO 2 coating has good affinity towards chlorine-containing organic compounds, which further improves the selectivity for PCBs. Thirdly, both mTiO 2 and COFs have large specific surface area. The synergistic effects of the composite coating make the HSSE assay exhibit high capacity, selectivity and prominent sensitivity towards PCBs detection coupling with TDGCMS. Finally, it is an environmentally friendly pretreatment method that does not require any organic solvents., (Copyright © 2018 Elsevier B.V. All rights reserved.)

In this paper, a novel dispersive solid phase extraction (dSPE) adsorbent based on aptamer-functionalized magnetic metal-organic framework material was developed for selective enrichment of the trace polychlorinated biphenyls (PCBs) from soil sample. Firstly, we developed a simple, versatile synthetic strategy to prepare highly reproducible magnetic amino-functionalized UiO-66 (Fe3O4@PDA@UiO-66-NH2) by using polydopamine (PDA) as covalent linker. Then amino-functionalized aptamers which can recognize 2,3',5,5'-tetrachlorobiphenyl (PCB72), 2',3',4',5,5'-pentachlorobiphenyl (PCB106) were covalent immobilized on UiO-66-NH2 through coupling reagent of glutaraldehyde. Aptamer-functionalized adsorbent (Fe3O4@PDA@UiO-66-Apt) can specifically capture PCBs from complex matrix with high adsorption capacity based on the specific affinity of aptamer towards target. Moreover, the adsorbent can be easily isolated from the solution through magnetic separation after extraction. Afterwards, the detection was carried out with gas chromatography tandem mass spectrometry (GC-MS). The selective dSPE pretreatment coupled with GC-MS possessed high selectivity, good binding capacity, stability, repeatability and reproducibility for the extraction of PCBs. Furthermore, the adsorbent possessed good mechanical stability which can be applied in replicate at least for 60 extraction cycles with recovery over 80%. It provided a linear range of 0.02-400ngmL(-1) with a good correlation coefficient (R(2)=0.9994-0.9996), and the limit of detection was found to be 0.010-0.015ngmL(-1). The method was successfully utilized for the determination of PCBs in soil samples., (Copyright © 2016 Elsevier B.V. All rights reserved.)

In this paper, a novel aptamer-functionalized stir bar sorptive extraction (SBSE) was developed for selective enrichment of the low abundance polychlorinated biphenyls (PCBs) from fish samples. This approach was based on the immobilization of aptamer which could recognize 2,3',5,5'-tetrachlorobiphenyl (PCB72) and 2',3',4',5,5'-pentachlorobiphenyl (PCB106) on one kind of metal-organic frameworks (Zn4O(BDC)3, MOF-5). MOF-5 as a substrate was prepared by potential-controlled cathodic electrodeposition on stainless steel. This aptamer-functionalized stir bar sorptive extraction (Apt-MOF SBSE) fiber could be facile synthesized in one-step. PCB72 and PCB106 were employed as target analytes for selective extraction by the developed method. The adsorbed targets could be desorbed easily in pH 3.0 100mM glycine-HCl buffers and then extracted by the methylene chloride. Afterwards, the detection was carried out with gas chromatography-tandem mass spectrometry (GC-MS). The Apt-MOF SBSE pretreatment coupled with GC-MS exhibited high selectivity, good binding capacity, stability and reproducibility for the detection of PCBs. It provided a linear range of 0.02-250ngmL(-1) with a good coefficient of determination (R(2)=0.9991-0.9996) and the detection limit was 0.003-0.004ngmL(-1). More importantly, the method was successfully utilized for the determination of PCBs in fish samples with good enrichment factor (1930-2304). Therefore, this new SBSE coating opens up the possibility of selective enrichment of a given target PCBs from complex fish samples., (Copyright © 2015 Elsevier B.V. All rights reserved.)

A "signal-on'' aptasensor was developed for simultaneous detection of chloramphenicols (CAP) and polychlorinated biphenyl-72 (PCB72) with a novel multi-metal ions encoded nanospherical brushes as nanotracers. To construct the assay, the respective aptamer of CAP and PCB72 labeled magnetic gold nanoparticles as capture probes (aptamer-MGPs), and their complementary single strand DNA (s-DNA) encoded metal ions (Cd(2+) and Pb(2+)) on nanospherical branched polyethylene imine brushes as tracers (s-DNA-MSPEIs), were simultaneously synthesized. After that, the capture probe and tracers were connected through a hybridization reaction between s-DNA and aptamers. In the presence of CAP and PCB72, the analytes could react with the aptamers on capture probes and release the tracers into supernatant after magnetic separation. The released tracers with metal ions (Cd(2+) and Pb(2+)) could be simultaneously detected through the square wave voltammetry (SWV) without acid dissolution, which can switch the signals of the biosensor to "on'' state. Under optimal conditions, the assay could detect CAP and PCB72 as low as 0.3 pg mL(-1) with the dynamitic range from 0.001 to 100 ng mL(-1) and exhibited excellent selectivity. More importantly, the strategy can be extended easily to other targets after changing the corresponding aptamers and other metal ions tracers, which provides a promising and facile approach in multiplex detection of ultra-trace level of pollutants in food safety without more complex separation and washing steps., (Copyright © 2015 Elsevier B.V. All rights reserved.)

In this work, several kinds of the metal-organic framework (MOF) were evaluated the adsorption performance to PCB. Finally, MOF-5(Fe) was introduced in stir bar sorptive extraction (SBSE) as the adsorbent to extract six polychlorinated biphenyls (PCBs). Nd-Fe-B permanent magnet was employed as stir bar, which was then coated with Fe3O4-MOF-5(Fe) composite magnetic material, which was prepared by solvothermal method. The stir bar was then employed to extract and enrich six indicator PCBs (2,2',5,5'-tetrachlorobiphenyl, 2,2',4,5,5'-pentachlorobiphenyl, 2,2',3,4,4',5-hexachlorobiphenyl, 2,3,4,4,5-pentachlorobiphenyl, 2,2',4,4',5,5'-hexachlorobiphenyl, 2,2',3,4,4',5,5'-heptachlorobiphenyl) under stirring, then eluted by n-hexane under ultrasound. Its saturated adsorption amount was found to be 17.0-17.8 mg g(-1) and only 30 min were needed to reach adsorption equilibrium. The MOF-stir bar can be reused for 60 times with the recovery above 80%, which exhibited good stability. Under the optimal experimental conditions, MOF-5(Fe) based SBSE was coupled with GC-MS for detecting six PCBs. The limits of detection (S/N=3) of the developed method were 0.061-0.096 ng g(-1), with enrichment factors of 50-100 fold. And the linear ranges were 0.01-500 μg L(-1). The new method was successfully applied to assess PCBs in fish samples with satisfactory recovery ranging from 94.3% to 97.5%., (Copyright © 2015 Elsevier B.V. All rights reserved.)

The novel reductive graphene oxide-based magnetic molecularly imprinted poly(ethylene-co-vinyl alcohol) polymers (rGO@m-MIPs) were successfully synthesized as adsorbents for six kinds of polychlorinated biphenyls (PCBs) in fish samples. rGO@m-MIPs was prepared by surface molecular imprinting technique. Besides, Fe3 O4 nanoparticles (NPs) were employed as magnetic supporters, and rGO@Fe3 O4 was in situ synthesis. Different from functional monomer and cross-linker in traditional molecularly imprinted polymer, here, 3,4-dichlorobenzidine was employed as dummy molecular and poly(ethylene-co-vinyl alcohol) was adopted as the imprinted polymers. After morphology and inner structure of the magnetic adsorbent were characterized, the adsorbent was employed for disperse solid phase extraction toward PCBs and exhibited great selectivity and high adsorption efficiency. This material was verified by determination of PCBs in fish samples combined with gas chromatography-mass spectrometry (GC-MS) method. According to the detection, the low detection limits (LODs) of PCBs were 0.0035-0.0070 µg l(-1) and spiked recoveries ranged between 79.90 and 94.23%. The prepared adsorbent can be renewable for at least 16 times and expected to be a new material for the enrichment and determination of PCBs from contaminated fish samples., (Copyright © 2015 John Wiley & Sons, Ltd.)

In this study, we developed a magnetically multifunctional purifying material for efficient removal of matrix interferences, especially certain organochlorine pesticide (DDT, DDE, and DDD), during the determination of toxic highly chlorinated polychlorinated biphenyls (PCBs) at trace levels in soil samples. The multifunctional adsorbent (CMCD-NH2-MNPs) was prepared by grafting carboxymethyl-β-cyclodextrin on the surface of amino-functionalized magnetite (Fe3O4) nanoparticles. CMCD-NH2-MNPs has stronger host-guest complexation with DDT, DDE, and DDD, but the same adsorbent shows weaker adsorption ability toward highly chlorinated PCBs (from tetra- to octa-chlorinated PCBs) owing to their steric hindrance effect. Based on this principle, a simple and rapid gas chromatography-mass spectrometry (GC-MS) method was developed for six indicator PCBs (PCB28, PCB52, PCB101, PCB138, PCB153, and PCB180) in soil. Comparative studies were conducted to determine the clean-up efficiency of the following three techniques: (i) Oasis-HLB, (ii) multi-layer silica column, and (iii) dSPE employing CMCD-NH2-MNPs. The results indicate that CMCD-NH2-MNPs as the purification material can easily and effectively remove DDT, DDE, and DDD in soil samples within a short duration of time. The recoveries for highly chlorinated PCBs were in the range of 85.4-102.2%, with RSDs varying between 1.0 and 6.5%. The proposed method was verified as one of the most effective clean-up procedures for the analysis of highly chlorinated PCBs in real soil samples., (Copyright © 2014 Elsevier B.V. All rights reserved.)

Novel multi-walled carbon nanotube modified dummy-template molecularly imprinted microspheres (MWCNTs@DMMIPs) were successfully synthesized as adsorbents for six kinds of polychlorinated biphenyls (PCBs). MWCNTs@DMMIPs were prepared by a surface molecular imprinting technique. Core-shell Fe3 O4 @SiO2 nanoparticles were employed as magnetic support. 3,4-Dichlorobenzene acetic acid was used as a dummy template instead of PCBs, methacrylic acid was used as functional monomer and ethylene glycol dimethacrylate was used as the cross-linker. The resulting absorbent was characterized by various methods. The adsorbent was employed for extracting PCBs and exhibited good selectivity and high adsorption efficiency. Furthermore, it was reusable and capable of magnetic separation. Adsorption kinetics fit well with a pseudo-second-order kinetic equation and also exhibited a three-stage intra-particle diffusion model. The Freundlich model was used to describe the adsorption isotherms. The materials were successfully applied to the magnetic dispersive solid-phase extraction of six kinds of PCBs followed by gas chromatography with mass spectrometry determination in fish samples, the limit of detection of six kinds of PCBs were 0.0028-0.0068 μg/L and spiked recoveries ranged between 73.41 and 114.21%. The prepared adsorbent was expected to be a new material for the removal and recovery of PCBs from contaminated foods., (© 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

In this paper, Fe(3)O(4) nanoparticles (Fe(3)O(4) NPs) grafted carboxyl groups of multiwalled carbon nanotubes with cationic polyelectrolyte poly (dimethyldiallylammonium chloride) (PDDA) (MWCNTs-COO(-)/PDDA@Fe(3)O(4)), are successfully synthesized and used for the extraction of six kinds of major toxic polychorinated biphenyls (PCBs) from a large volume of water solution. The hydrophilicity of the PDDA cage can enhance the dispersibility of sorbents in water samples, and the superparamagnetism of the Fe(3)O(4) NPs facilitate magnetic separation which directly led to the simplification of the extraction procedure. With the magnetic solid-phase extraction (MSPE) technique based on the MWCNTs-COO(-)/PDDA@Fe(3)O(4) sorbents, it requires only 30 min to extract trace levels of PCBs from 500 mL water samples. When the eluate condensed to 1.0 mL, concentration factors for PCBs became over 500. The spiked recoveries of several real water samples for PCBs were in the range of 73.3-98.9% with relative standard deviations varying from 3.8% to 9.4%, reflecting good accuracy of the method. Therefore, preconcentration of trace level of PCBs by using this MWCNTs-COO(-)/PDDA@Fe(3)O(4) sorbent, which are stable for multiple reuses, from water solution can be performed.

In this work, the molybdenum disulfide/reduced graphene oxide (MoS 2 /RGO) composite material was synthesized as a fiber coating to extract seven indicator polychlorinated biphenyls (PCBs; PCB28, PCB52, PCB101, PCB118, PCB138, PCB153, and PCB180) present in food via a saponification-headspace solid-phase microextraction assay (saponification-HS-SPME). The MoS 2 /RGO coating was prepared and deposited on a stainless steel wire with the help of a silicone sealant and used as an SPME fiber. The alkali solution dissolved the fat and helped in releasing the PCBs present in milk to the headspace for extraction under 100 °C. Following desorption in the inlet, the targets were quantified by gas chromatography-mass spectrometry. The effects of sorbent dosage, extraction time, added salts, and stirring rate on the extraction efficiency were investigated. The new coating was able to adsorb a higher amount of analytes, which was about 1.1–2.9 times in comparison with the commercially available SPME fiber (coated with divinylbenzene/carboxen/polydimethylsiloxane). It also showed the highest adsorption capability toward PCBs, which was 1.5–2.7 times that of the prepared RGO modified fiber. Moreover, MoS 2 also showed a strong affinity toward PCBs in a manner similar to its affinity for graphene. The developed method is simple and environmentally friendly as it does not require any organic solvents. Furthermore, it exhibits good sensitivity with detection limits less than 0.1 ng mL −1 , linearity (0.25–100 ng mL −1 ), and reproducibility (relative standard deviation below 10% for n = 3). The novel SPME fibers are inexpensive, reusable, and can be easily prepared and manipulated. In addition, the saponification-HS-SPME assay was also found to be suitable for screening persistent organic pollutants in dairy products. [ABSTRACT FROM AUTHOR]

The article describes a multiplex aptamer based voltammetric assay for the food pollutants chloramphenicol (CAP) and polychlorinated biphenyl-72 (PCB72). The method is based on the displacement of a nanotracer (an aptamer-labeled magnetic dendritic probe) by the analytes which cause the release of the corresponding encoded nanotracers. Thiolated aptamers of CAP and PCB72 were first self-assembled on magnetic gold nanoparticles (FeO@Au) as capture probes to concentrate the target analytes CAP and PCB72, respectively. Next, their hybridized complementary strands (cDNA1 or cDNA2) and a dendritic polymerase were linked to quantum dots (CdS or PbS) to form the respective nanotracers. Finally, encoded composite magnetic probes were obtained through hybridization reaction between aptamers and cDNAs. Once CAP and PCB72 are recognized by the composite probes, the nanotracers are released into the supernatant where they can be detected simultaneously by voltammetry of the metal ion markers Cd(II) and Pb(II) at −0.81 and −0.57 V (vs. Ag/AgCl), respectively. The concentration measured for Cd(II) and Pb(II) are directly proportional to the concentrations of CAP and PCB72, respectively, in the range from 0.001 to 100 ng mL. The detection limits for CAP and PCB72 are 0.33 and 0.35 pg mL, respectively (at an S/N ratio of 3), which is 2 to 3 orders of magnitude lower than the routinely performed and commercially available ELISA. The method is perceived to possess large potential in that it may be applied to other antibiotics by using the appropriate aptamers. [Figure not available: see fulltext.] [ABSTRACT FROM AUTHOR]

A novel and effective magnetic multiwalled carbon nanotube composite for the separation and enrichment of polychlorinated biphenyls was developed. Fe3O4@SiO2 core-shell structured nanoparticles were first synthesized, then the poly(sodium 4-styrenesulfonate) was laid on its surface to prepare the polyanionic magnetic nanoparticles. The above materials were then grafted with polycationic multiwalled carbon nanotubes, which were modified by polydiallyl dimethyl ammonium chloride through the layer-by-layer self-assembly approach. Its performance was tested by magnetic solid-phase extraction and gas chromatography with mass spectrometry for the determination of six kinds of indicator polychlorinated biphenyls in water samples. Under optimal conditions, the spiked recoveries of several real samples for six kinds of polychlorinated biphenyls (PCB28, PCB52, PCB101, PCB138, PCB153, PCB180) were in the range of 73.4-99.5% with relative standard deviations varying from 1.5 to 8.4%. All target compounds showed good linearities in the tested range with correlation coefficients higher than 0.9993. The limits of quantification for six kinds of indicator polychlorinated biphenyls were between 0.018 and 0.039 ng/mL. The proposed method was successfully applied to analyze polychlorinated biphenyls in real water samples. Satisfactory results were obtained using the effective magnetic absorbent. [ABSTRACT FROM AUTHOR]

Abstract: In this paper, Fe3O4 nanoparticle (Fe3O4 NPs) grafted graphene oxide (Fe3O4@GO), are successfully synthesized and used for the extraction of 2,4,4′-trichlorobiphenyl (PCB 28) from a large volume of water solution. With the magnetic solid-phase extraction (MSPE) technique based on the Fe3O4@GO sorbents, it requires only 30min to extract trace levels of PCB 28 from 200mL water samples. The Fe3O4@GO was analyzed by using powder X-ray diffraction (XRD), transmission electron microscopy (TEM), Fourier Transform infrared (FT-IR) spectroscopy, and Vibrating sample magnetometer (VSM), specific surface area analyzer. The adsorption kinetics, adsorption capacity of the adsorbent, and the effect of the solution pH and desorption conditions on the removal efficiency of PCB 28 were investigated. The second-order kinetic equation best describes the sorption kinetics. The results showed that Fe3O4@GO was a suitable material in the pre-concentration and immobilization of PCB 28 from large volumes of aqueous solutions in polychlorinated biphenyl pollution cleaning. [Copyright &y& Elsevier]