Search

Antibacterial properties of components are increasingly becoming an important challenge in material development especially in polymer technology. A well‐known additive with which an antibacterial effect can be achieved is the metal oxide titanium dioxide. The aim of this research work was to investigate possible influences on the flexural properties of additively manufactured components resulting from the addition of titanium dioxide as an antimicrobial additive. Compounds with 5 %, 10 % and 15 % titanium dioxide and polyamide 12 as matrix material were produced. Three‐point bending test specimens were fabricated out of these compounds, anaylsed and the results were compared with specimens made of virgin polyamide 12. The investigations show a general loss in ductility compared to the virgin polyamide 12. A comparison of the different titanium dioxide contents shows no clear change in the flexural stress at conventional bending. The flexural strain at break seems to decrease for higher titanium dioxide contents. [ABSTRACT FROM AUTHOR]

Antimicrobial properties of plastic components are an important part of polymer engineering. One commonly used additive with an antibacterial effect is titanium dioxide. The aim of this study is to investigate the influences on the mechanical properties resulting from the addition of titanium dioxide as an antimicrobial additive and the processing of the compounds with selective laser sintering. Compounds with 5 %, 10 % and 15 % titanium dioxide and polyamide 12 as matrix material are fabricated. Tensile test specimen are produced from the compounds, examined and the results compared with virgin polyamide 12. The investigations show a general loss in the ultimate tensile strength compared to the virgin polyamide 12. Comparing the different titanium dioxide contents with each other, an increasing tensile strength with increasing titanium dioxide content of the compound can be examined. A decreasing elongation at break and thus a decreasing ductility can also be observed. Furthermore, the results of the tensile test show a stiffening effect, i. e. an increase in the elastic modulus due to the addition of titanium dioxide. [ABSTRACT FROM AUTHOR]