Search

The Space Plasma Environment Research Facility (SPERF) is a new ground-based experimental device for fundamental research studies on space plasma currently under construction at Harbin Institute of Technology in China. Scientific objectives of the SPERF include studying the asymmetric reconnection dynamics relevant to the interaction between the interplanetary and magnetospheric plasmas, reproducing the inner magnetosphere to simulate the processes of trapping, acceleration, and transport of energetic charged particles restrained in a dipole magnetic field configuration, and revealing the physical mechanism of the dipolarization front in the magnetotail. The device comprises a vacuum chamber, 11 coils consisting of 18 groups of sub-coils that are independently programmablely energized, and the plasma source system to provide the magnetic field and the plasma required by the physical experiments. Thus, each of these 18 groups of sub-coils requires a separate pulsed power supply; furthermore, the 18 pulsed power supplies constitute the pulsed power supply system of the SPERF of which the total storage energy is up to 18.3 MJ, and the technical challenges have to be overcome. The power supply energizing a dipole field coil (labeled OJC coil) wired by the copper wire to provide a dipole magnetic field is the most energetic power supply (labeled OJC power supply) with a 2.42 MJ, 16.8 mF capacitor bank charged to 20 kV. The OJC power supply delivers a current with a peak of 18 kA for a rise time of ∼26.69 ms, and the duration of the current is not less than 95% of the peak over 10 ms to the OJC coil. Meanwhile, the most challenging power supply is the power supply labeled poloidal field power supply with a 5.04 mF capacitor bank charged to 20 kV, which provides the excitation current for the load coil set with the current not less than 360 kA at the typical time of 0.11 ms to produce the sufficient growth of the magnetic field that the experiments need. In this paper, the overall design of the pulsed power supply system, the design concept of the modularization, and the principle selection basis of the key components are presented. The technical details of each power supply will be demonstrated in the future. [ABSTRACT FROM AUTHOR]

3D asymmetric magnetic reconnection is an important investigation of the Space Plasma Environment Research Facility, which is being built as a user facility at the Harbin Institute of Technology in China. Four magnetosheath coils, which consist of Poloidal Field (labeled PF) coils and Toroidal Field (labeled TF) coils, are used to generate the magnetic field and plasma environment for the reconnecting experiment. A capacitor-based pulsed power supply (PPS) system with a modular design is developed to excite the magnetosheath coils to generate the required amplitude and duration of the magnetic field. The PPS system includes the PF PPS and TF PPS, which include four sets of PPSs, respectively. Each set of PF PPS and TF PPS consists of nine modules and four modules, respectively, and each module consists of a charge and discharge unit. The PF PPS can provide a pulsed current of no less than 360 kA for the corresponding PF coil at 0.11 ms when the charging voltage is 20 kV, and the duration of the pulsed current from the peak to 10% of the peak is no more than 0.6 ms. The TF PPS can provide a pulsed current of no less than 200 kA for the corresponding TF coil at 0.08 ms when the charging voltage is 20 kV, and the duration of the pulsed current from the peak to 10% of the peak is no more than 1.6 ms. The detailed design of the PPS has been discussed in this paper, and the detailed design of the main components in the discharge unit of the PPS is also given in this paper. Finally, the discharge tests of all the PPSs are carried out to verify the design of the PPSs, and the results of the PPSs in discharge tests indicate that all the PPSs meet the design requirements. [ABSTRACT FROM AUTHOR]