Search

• The Fenton-like Cu-PAN 3 catalysts is first synthesized by co-precipitation and carbon thermal reduction method. • Dual reaction centers are constructed around graphene-like carbon and Cu species. • The pollutants as electron donors inhibit the ineffective decomposition of H 2 O 2 at the electron-poor centers. • The pollutant removal mainly relies on the surface cleavage at the electron-poor centers. High energy consumption has seriously hindered the development of Fenton-like reactions for the removal of refractory organic pollutants in water. To solve this problem, we designed a novel Fenton-like catalyst (Cu-PAN 3) by coprecipitation and carbon thermal reduction. The catalyst exhibits excellent Fenton-like catalytic activity and stability for the degradation of various pollutants with low H 2 O 2 consumption. The experimental results indicate that the dual reaction centers (DRCs) are composed of Cu-N-C and Cu-O-C bridges between copper and graphene-like carbon, which form electron-poor/rich centers on the catalyst surface. H 2 O 2 is mainly reduced at electron-rich Cu centers to free radicals for pollutant degradation. Meanwhile, pollutants can be oxidized by donating electrons to the electron-poor C centers of the catalyst, which inhibits the ineffective decomposition of H 2 O 2 at the electron-poor centers. This therefore significantly reduces the consumption of H 2 O 2 and reduces energy consumption. [Display omitted] [ABSTRACT FROM AUTHOR]

Graphical abstract Highlights • Mo S C and Mo O Co electron transfer bridges are successfully constructed on CMS-rGO NSs. • CMS-rGO NSs possesses the function of generating and activating H 2 O 2 synchronously. • CMS-rGO NSs shows very high Fenton-like activity for degradation of pollutants. • Dye pollutants can directly act as electron donors for CMS-rGO NSs. Abstract Consumption of additional H 2 O 2 is necessary in classical Fenton catalysis. Herein, we report a novel and special nanocatalyst consisting of CoMoS 2 nanosphere-embedded, reduced graphene oxide (rGO) nanosheets (CMS-rGO NSs). This nanocatalyst was discovered to have an impressive reactivity for in situ generation and synchronistical activation of H 2 O 2 in different active centers, yielding fast and efficient degradation of the pollutants. The reaction rate is ∼21 times higher than that of conventional Fenton catalysts. The characterization shows that countless flower-like CoMoS 2 nanospheres are uniformly embedded in the rGO nanosheets through Mo S C bonding bridges in CMS-rGO NSs, which leads to activation of the π electrons and their transfer from rGO to the metal centers (π → M). The formed Mo O Co further leads to a distribution of orientations of the electrons around the metal centers due to the different electronegativity of Mo and Co. During the reaction, the dissolved O 2 is efficiently reduced to HO 2 /O 2 − around the electron-rich Mo center, and HO 2 /O 2 − is further reduced to H 2 O 2 around the Co center. The generated H 2 O 2 is finally reduced to OH for degrading dyes in the electron-rich metal (Mo or Co) centers of CMS-rGO NSs. The dye pollutants also act as electron donors, and they are directly degraded in the electron-poor π-center of CMS-rGO NSs, which promote the electron transfer cycle and achieve electron gain-loss balance. This discovery provides a new strategy for H 2 O 2 generation-activation and pollutant degradation through constructing electron transfer bridges over the surface of catalysts. [ABSTRACT FROM AUTHOR]

Metal-containing Fenton catalysts have been widely investigated. Here, we report for the first time a highly effective stable metal-free Fenton-like catalyst with dual reaction centers consisting of 4-phenoxyphenol-functionalized reduced graphene oxide nanosheets (POP-rGO NSs) prepared through surface complexation and copolymerization. Experimental and theoretical studies verified that dual reaction centers are formed on the C-O-C bridge of POP-rGO NSs. The electron-rich center around O is responsible for the efficient reduction of H2O2 to •OH, while the electron-poor center around C captures electrons from the adsorbed pollutants and diverts them to the electron-rich area via the C-O-C bridge. By these processes, pollutants are degraded and mineralized quickly in a wide pH range, and a higher H2O2 utilization efficiency is achieved. Our findings address the problems of the classical Fenton reaction and are useful for the development of efficient Fenton-like catalysts using organic polymers for different fields. [ABSTRACT FROM AUTHOR]

A twofold cation-π-assembled catalyst consisting of honeycomb microsphere-like MoS 2 cross-linking g-C 3 N 4 hybrid (HM-MS/CN) is first developed to address the bottleneck of excessive resource and energy consumption in Fenton chemistry. A series of modern characterization techniques combined with theoretical calculation are used to reveal and verify the twofold cation-π interaction (Mo-O-C and Mo-S-C bonding bridges). It is found that the electrons of pollutants can be captured by H 2 O 2 and O 2 through the twofold cation-π interaction during Fenton-like reaction, which inhibits the oxidative decomposition of H 2 O 2 and promotes its hydroxylation. As a result, HM-MS/CN shows excellent performance for water purification by initiating pollutants as electron donors substituting H 2 O 2 consumption under mild natural conditions, and the actual consumption of H 2 O 2 in this system is only 6–8% of that in the common Fenton systems. This discovery is of great significance for the development of novel water purification technology with high efficiency and low consumption. [Display omitted] • A twofold cation-π-assembled catalyst consisting of HM-MS/CN is first prepared. • HM-MS/CN shows excellent performance for actual water purification. • The actual consumption of H 2 O 2 is only 6–8% of that in the common Fenton systems. • Twofold cation-π interaction based on Mo-O-C and Mo-S-C is responsible for excellent performance. • Pollutants act as electron donors substituting H 2 O 2 consumption via twofold cation-π. [ABSTRACT FROM AUTHOR]

• Co2+-N-C π is constructed via atomically dispersed Co bonding with C-based graphene-like structure. • Co2+-N-C π (Co−π) structure plays key role for PMS activation and pollutant degradation. • Electron donation effect of pollutants is realized through π-π interaction in SACo-NGs system. • High efficiency and low consumption are realized in SACo-NGs/PMS water treatment system. Orbital interaction involving metal cation−π is an important form for electron transfer regulation. To accelerate the interfacial electron transfer of peroxymonosulfate (PMS) activation for water treatment, we report a new strategy through bonding atomically dispersed cobalt with nanospheric C-based graphene-like structures (SACo-NGs) to form metal cation−π structure, driving rapid and directional transfer of the electrons of pollutants to PMS on the catalyst surface. The catalyst SACo-NGs is synthesized by an enhanced hydrothermal-sintering method and the formation of metal cation−π structure is demonstrated by X-ray absorption fine structure (EXAFS), X-ray photoelectron spectroscopy (XPS), electron paramagnetic resonance spectroscopy (EPR) and Raman spectroscopy. It is found that Co−π structures (Co2+-N-C π) play a key role for the efficient activation of PMS, which results in pollutants being greatly removed in a few minutes. During the reaction, pollutants can donate electrons for the system through π−π interaction accompanying by the direct oxidative degradation of pollutants. The obtained electrons are quickly transferred to the atomically dispersed cobalt sites through the formed cation−π structure, which promotes the activation of PMS. This is a successful practice in the field of PMS activation using cation−π structure to accelerate electron transfer and achieve rapid degradation of pollutants. [ABSTRACT FROM AUTHOR]

• nZVCu-Cu(II)-rGO is developed via an annealing reduction process for first time. • Nanoscale Cu(0) and Cu(II) are generated on rGO along with C-O-Cu formation. • Dual reaction centers form around Cu(II) and aromatic rings of rGO due to π→Cu. • Nanoscale Cu(0) accelerate the electron transfer of the dual reaction center system. • Pollutants are efficiently degraded by two ways: as electron donors and attacked by radicals. Nanoscale zero-valent copper combined with Cu(II)-doped reduced graphene oxide hybrid (nZVC-Cu(II)-rGO) is synthesized through an annealing reduction process, and it shows very high activity and efficiency for removing refractory organic compounds with H 2 O 2. The conversion rate for the organic pollutant in this system is ∼77 and ∼13 times higher than that in the graphene oxide (GO) and reduced graphene oxide (rGO) systems, respectively. The characterization shows that nanoscale Cu(0) and Cu(II) are generated on the rGO surface during the annealing process and they are accompanied by the C O Cu bonding formation between the rGO substrate and the Cu(II) species in nZVC-Cu(II)-rGO, which induces cation–π interactions on the surface, resulting in the reinforced electron-rich micro-centers formation around the nZVC-enhanced Cu(II) species and electron-poor micro-centers on rGO-aromatic rings. The generation of nanoscale Cu(0) consolidates the polarization of the dual reaction micro-centers and greatly accelerates the electron transfer of the system, thus promoting H 2 O 2 reduction to OH in the electron-rich micro-centers. Pollutants can obviously replace H 2 O 2 as the electron donors of the system and are efficiently oxidized and degraded in the electron-poor micro-centers, with their own electron energy being fully utilized in the nZVC-Cu(II)-rGO Fenton-like system. [ABSTRACT FROM AUTHOR]

[Display omitted] Herein, a novel metal-free catalyst consisting of multiporous oxygen-rich carbon–nitrogen graphene-like nanosheets (O LAA -CN NSs) is first developed through a staged temperature-programmed calcination of l -ascorbic acid (LAA)-modified dicyandiamide precursor. It is found that the oxygen species from l -ascorbic acid (O LAA) are introduced into the graphene-like basic matrix and replace partial N atoms to form the C O C-R structure, leading to the non-uniform distribution of electrons on the catalyst surface, and the formation of electron-rich centers around the C O C microareas according to a series of characterization techniques. As a result, O LAA -CN NSs exhibits excellent performance for refractory pollutant removal in the presence of peroxymonosulfate (PMS) and dissolved oxygen. Some pollutants with complex structures are even completely degraded within only 1 min. The interface reaction mechanism is further revealed that PMS mainly acts as an active inducer to drive the electron donation of pollutants over O LAA -CN NSs. These electrons are finally utilized by dissolved oxygen to generate reactive oxygen species (ROS) through the interface process. This reaction system results in pollutants that can either be cleaved directly by surface oxidation process or degraded by the attack of the generated ROS, such as singlet oxygen (1O 2) and superoxide radicals (O 2 •−), through oxygen activation, which significantly reduces the resource and energy consumption in advanced wastewater treatment by harnessing the energy of pollutants and dissolved oxygen in the water. [ABSTRACT FROM AUTHOR]

[Display omitted] The heterogeneous Fenton process suffers from low efficiency because of the low electron transfer cycle rate of Fe3+/Fe2+, which often consumes enormous amounts of hydrogen peroxide (H 2 O 2) or other energy. Herein, we report a novel Co-based Fenton-like catalyst (in-situ -Co-g-C 3 N 4) synthesized via the surface complexation method, in which Co species were modified in situ into the framework of the graphitic carbon nitride (g-C 3 N 4) substrate through C–O–Co chemical bonding. The catalyst exhibited higher Fenton-like catalytic activity than pure g-C 3 N 4 in the degradation of various pollutants under neutral conditions, as evidenced by the approximately 150-fold higher Fenton-like reaction rate constant of in-situ -Co-g-C 3 N 4 than that of g-C 3 N 4. Density functional theory (DFT) calculations and a series of experimental and characterization analyses revealed the interfacial reaction mechanism between H 2 O 2 , pollutants and in-situ -Co-g-C 3 N 4. During the Fenton-like reaction, the electron-poor C center on the aromatic ring of g-C 3 N 4 could capture the electrons deprived from pollutants, and subsequently deliver them to around the electron-rich Co center to efficiently reduce H 2 O 2 to hydroxyl radicals (•OH), enabling H 2 O 2 to be used efficiently for the degradation of pollutants. This study provides a strategy for improving Fenton-like degradation efficiency by effectively utilizing the energy of organic pollutants. [ABSTRACT FROM AUTHOR]

Herein, we fabricated CoCu-0.25-O v with ternary Co...O v ...Cu sites through simple co-precipitation to achieve effective co-utilization of organics and dissolved oxygen (DO) as endogenous electron donor-acceptor in Fenton-like system. Around 100% of dimethylamine (DMA) min within 30 is removed. The involved kinetics (0.22 min−1) and oxidant utilization efficiency (22.5%) are higher than controls with binary sites. Multi-scaled characterizations and theoretical calculations reveal that electron-polarized Co...O v ...Cu sites facilitate co-activation of DMA and DO as electron donor-acceptor through increasing d -band center and lowering work function of catalyst. Meanwhile, ternary sites favor 1O 2 and SO 4 •− generation, and shorten the migration distance of active species to pollutant, thus achieving excellent dual performance improvements. Semi-quantitative results of ESR indicate that DO activation and peroxymonosulfate (PMS) oxidation contribute about three-fourths and one-fourth to 1O 2 production, respectively. This contribution provides a new and sustainable strategy for high-efficiency and oxidant-saving removal of refractory pollutants in the environment. [Display omitted] • Co...O v ...Cu sites greatly improve removal performance of DMA and PMS utilization rate. • Ternary sites activate DMA and DO to replace PMS and favor the formation of ROSs. • Increased d -band center and lower work function of catalyst boost the co-activation. • DMA is removal by enhanced multipath (self-oxidation, 1O 2 and SO 4 •− attacks). • O 2 activation and PMS oxidation contribute 3/4 and 1/4 to 1O 2 formation, respectively. [ABSTRACT FROM AUTHOR]

A low-consumption water purification system is firstly constructed based on a new dual-reaction-center (DRC) catalyst molybdenum-doped zinc sulfide (Mo-ZnS, MZS) with a confined nonequilibrium surface. The extremely strong electron trapping ability of the Mo site is realized by the substitution of Mo for ZnS lattice. In this way, the electrons of emerging contaminants (ECs) are efficiently transferred to the nonequilibrium surface through the oriented interface process (Mo-S-Zn bond bridge), and obtained by the natural dissolved oxygen (DO) to generate hydrogen peroxide (H 2 O 2) under trace H 2 O 2 trigger without light and electricity assistant. The highest yield of H 2 O 2 is even up to ∼230 % of the initial value, and the ECs removal can reach 100 % within 60 min, which is far superior to conventional Fenton catalysts. This work realized the efficient utilization of the contaminant electrons through the construction of Mo-S-Zn bond bridge, which greatly reduced the energy consumption of water purification and improved the resourcefulness of ECs. [Display omitted] • DRC catalyst MZS with the confined nonequilibrium surface is first prepared. • MZS shows excellent performance for water purification. • Efficient H 2 O 2 generation is achieved without light and electricity assistant. • The highest H 2 O 2 concentration reaches up to ∼230 % of the initial concentration. • ECs electrons are efficiently utilized in ORR processes and water purification. [ABSTRACT FROM AUTHOR]

• Mesoporous reduction state cobalt species-doped silica nanospheres are first prepared. • Excellent activity is realized in mp -RSCo-SiO 2 NSs/H 2 O 2 system. • Efficient dual-pathway degradation of pollutant is achieved in Fenton-like process. • Pollutants replace H 2 O 2 as electron donors for the mp -RSCo-SiO 2 NSs system. • A new interfacial Fenton-like reaction mechanism involving pollutants is proposed. A novel heterogeneous Co-containing Fenton-like catalyst consisting of mesoporous reduction state cobalt (RSCo)-doped silica (SiO 2) nanospheres (mp -RSCo-SiO 2 NSs) was prepared by an enhanced hydrothermal process. The catalyst exhibited very high activity and stability for a series of refractory pollutant degradation in a very wide pH range of 3.1–10.9. The Fenton-like reaction rate constant of this Co-containing catalyst was approximately 290 times higher than that of Co 3 O 4 for pollutant degradation under the neutral and mild conditions. Based on the characterization, the catalyst possessed a porous nanosphere morphology, and the reduction state cobalt species, including nano-zero-valent cobalt (nZVCo) and Co2+, were found to be generated in the SiO 2 framework through forming Co O Si bonds. During the Fenton-like reaction, the electron donation effect of organic pollutants was successfully realized through the interaction of "Pollutants → Co2+/0-SiO 2 ". The obtained electrons from pollutants were transferred to the catalyst surface and captured by H 2 O 2 , resulting in the generation of hydroxyl radicals (OH). Therefore, a dual-pathway degradation of the pollutants was realized: (I) oxidation and degradation as the electron donors for the system and (II) attacking and destruction by OH radicals. This work provided a new perspective on the effective utilization of the electrons of pollutants and the improvement of Fenton reaction efficiency. [ABSTRACT FROM AUTHOR]

• Excellent activity for water purification is realized in cobalt-zinc ferrite/PMS system. • Surface oxygen vacancy induces PMS activation to generate •OH, SO 4 •− and H 2. • An efficient dual-pathway removal of pollutants is first achieved in PMS activation. • Pollutants replace PMS as electron donors for the V O -rich ZnFe 0.8 Co 0.4 O 2.4 system. • A novel solid-liquid interfacial reaction mechanism is proposed in PMS activation. Peroxymonosulfate (PMS) activation in heterogeneous processes for pollutant degradation is a promising water purification technology. However, the existed rate limiting step greatly restrains its performance and increases the consumption of PMS and energy. Herein, we offer a new strategy to solve this problem. In this work, surface oxygen vacancy (V O)-rich ZnFe 0.8 Co 0.4 O 2.4 nanoparticles were prepared and characterized, which exhibited high activity and stability for refractory pollutant degradation with PMS activation. It was found that PMS ([O 3 S O I O II H]−) could be adsorbed and trapped by the surface oxygen vacancies in the form of O I - Vo or O II - Vo during the reaction. Different electron transfer pathways from Vo to different O sites of PMS was realized in the solid-liquid interface based on the generation of OH, SO 4 − or H 2 from PMS reduction. Pollutants were predominantly adsorbed at metal Co sites in which their electrons were captured by metal species and then transferred to the surface oxygen vacancies, achieving efficient recycling of electrons in the aqueous suspensions. This system achieves a dual-pathway degradation of pollutants and electron transfer from pollutants to PMS to produce free radicals and H 2 , essentially changing the traditional concepts of pollutant removal and providing a sustainable strategy for pollutant utilization during water purification. [ABSTRACT FROM AUTHOR]

[Display omitted] • Single-atom Co-N 4 sites were constructed in Co-doped g-C 3 N 4. • The k obs of CBZ degradation reached 0.355 min−1, while PMS decomposition was mild. • 1O 2 and Co(IV) = O both played an important role in the degradation of CBZ. • PMS → OH*→Co(IV) = O → OO*→1O 2 was proposed as the optimal evolution path of PMS. • The release of 1O 2 was the rate-determining step in the path of Co(IV) = O to 1O 2. Tailoring the interfacial reaction pathway and low consumption strategy for the high efficiency Fenton-like processes is environmentally desirable but still challenging. Herein, single Co atom-doped g-C 3 N 4 was prepared for peroxymonosulfate (PMS) activation to reveal the interfacial reaction of high-valent cobalt-oxo species [Co(IV) = O] to singlet oxygen (1O 2) and construct an energy efficient Fenton-like system. Experimental results showed that the system could achieve 99.6% carbamazepine removal with k obs of 0.355 min−1, while the decomposition of PMS was mild (0.0988 and 0.00917 min−1 in 0–2 and 2–30 min, respectively). Mechanistic studies revealed the reaction of Co(IV) = O to 1O 2 , which moderated the reduction of Co sites, thus slowing the decomposition rate of PMS. But the synergistic effect of 1O 2 and Co(IV) = O maintained the high activity of the system. Combined with first-principles calculations, the optimal evolution path of PMS was PMS → OH*→Co(IV) = O → OO*→1O 2 , accompanied by the Co(II)/Co(III)/Co(IV) redox cycle. The work proposed a new interfacial reaction in term of Co(IV) = O triggered 1O 2 generation, resulting in the construction of an energy-efficient Fenton-like system and provided a novel idea for the development of efficient and low consumption water purification technology. [ABSTRACT FROM AUTHOR]

[Display omitted] • Zero-added conversion of chicken manure into water treatment catalyst (RCM) is realized. • Electron-poor/rich microregions are successfully constructed on RCM. • Pollutant degradation processes can be driven by a little bit of peroxymonosulfate. • RCM has excellent performance on actual wastewater treatment. • Water treatment with low consumption is achieved by utilization of pollutants. Fecal pollution in rural areas and water pollution caused by emerging contaminants (ECs) are two international environmental problems. Here, we propose a new strategy to address the two problems simultaneously through the resource utilization and harmless transformation of poultry manure as a kind of water purification catalyst with zero addition. The ordered bonding of intrinsic metal-organic species is realized in the resourcelized procedure by a one-stage calcination-annealing method, which results in the formation of electron-rich/poor microregions. With the triggering of a small amount of peroxymonosulfate (PMS), the energy/electrons of ECs are utilized by the dissolved oxygen in water driven by the electron-rich/poor microregions on the catalyst surface. As a result, the system exhibits excellent performance in removing various ECs. The degradation rate can even be maintained above 94.3 % after 10,000 cycles. This work indicates a sustainable approach to the effective utilization and treatment of rural waste and pollutants. [ABSTRACT FROM AUTHOR]

In common advanced oxidation processes, excess reagents and energy are often added to the reaction system to maintain the continuity of the reaction. These additions result in a large waste of resources and energy, which has become a bottleneck in the development of water treatment technology. In this study, we propose a new strategy to solve this problem based on a novel dual-reaction-center (DRC) Fe-ZnS quantum dots (Fe–ZnS QDs) catalyst that forms a non-equilibrium surface with an electron-polarized distribution. Through experimental and theoretical studies, it was verified that the activation of trace amounts of H 2 O 2 could break the energy barrier for pollutants to transfer electrons. The dissolved oxygen (DO) in the reaction system could be activated by gaining energy on the surface of the Fe–ZnS QDs catalyst, and was converted to 1O 2 to attack organic pollution. In addition, the pollutants themselves supplied electrons to H 2 O 2 through the surface of the Fe–ZnS QDs catalyst to generate more •OH radicals for pollutant degradation, thus providing two fast paths for pollutant degradation. The system could drive the reaction through a trace amount of H 2 O 2 , thereby activating DO to generate 1O 2 while effectively using the energy of pollutants. Therefore, the proposed system offers a new direction for the development of environmentally-friendly catalysts and greatly reduces the consumption of resources and energy. [Display omitted] • Fe–ZnS QDs is successfully developed as a Fenton catalyst for the first time. • The surface of ZnS QDs is regulated by trace Fe to form a non-equilibrium surface with an electron-polarized distribution. • The Fe–ZnS QDs/H 2 O 2 system exhibits excellent activity for pollutants degradation. • Inert oxygen species in reaction system are easily activated to 1O 2 to attack pollutants. [ABSTRACT FROM AUTHOR]

A novel metal-free catalyst consisting of typical flower-like graphitized polyimide (g-PI) is first synthesized via an enhanced hydrothermal polymerization process, and it exhibits excellent performance for pollutant removal through peroxymonosulfate (PMS) activation over a wide pH range (3−11). The catalyst is especially effective for attacking the endocrine disruptor bisphenol A (BPA), which can be completely degraded in a short time. Based on the results of characterization, g-PI is consisted of abundant aromatic frameworks with π conjugates based on C-O-C linkages and N-hybrid rings, which play essential roles in the subsequent degradation of pollutants. In the g-PI/PMS/BPA system, BPA (rich in π bonds) is preferentially adsorbed to the catalyst surface through π-π interactions, accompanied by a decrease in its activation energy to produce surface-adsorbed BPA*. This species can be directly attacked and degraded by PMS without the need for the radical processes, which saves the energy required for the intermediate activation process of PMS. On the other hand, the electrons obtained from pollutants are rapidly transferred to the O center, driving PMS activation to generate free radicals. The synergetic interface process offers excellent potential for practical wastewater purification. [Display omitted] • g-PI is synthesized by graphitization of metal-free polyimide (PI). • g-PI/PMS system shows excellent activity in degrading organic pollutants. • Pollutants are preferentially adsorbed on the surface of g-PI through π-π interactions. • Surface-adsorbed species can be directly oxidized by PMS without the need for radical processes. [ABSTRACT FROM AUTHOR]

d-g-C 3 N 4 -Fe composites was prepared via a self-assembly and calcination process. According to measurements and density functional theory (DFT) computations, the complexation of iron and pyridinic N of g-C 3 N 4 (Fe‒N) occurred with Fe(III)-π interaction, causing more oxygen vacancies (OVs) with more electrons in iron oxides. In the catalyst air-saturated suspension, the adsorbed pollutants complexed surface Fe(III) through their hydroxyl group donated electrons to around OVs, reducing the surface Fe(III) to Fe(II) and were destructed by Fe(III)-π interaction of the complexation. The addition of H 2 O 2 mainly acted as acceptor being reduced •OH at the OV centers, causing higher degradation rate of pollutants due to both •OH and the surface reaction. However, for the adsorbed hydrophobic pollutants onto the sites of peripheral structure in g-C 3 N 4 , H 2 O 2 was mainly decomposed into O 2 by the synergistic effect of iron species and OVs. Therefore, the catalyst exhibited high Fenton-like efficiency for the degradation of hydroxyl-containing pollutants and hydrophobic pollutants mixing with the former. Our results demonstrate that the Fe(III)-π interaction could carry out the oxidation of pollutants on the catalyst surface, decreasing the consumption of H 2 O 2 , and the role of OVs depends on pollutant adsorption patterns. ga1 • Fe‒N complexation formed between g-C 3 N 4 and iron oxide in d-g-C 3 N 4 -Fe. • More oxygen vacancies produced in iron oxide of d-g-C 3 N 4 -Fe. • Degradation of organics was performed from the surface oxidation rather than •OH. • d-g-C 3 N 4 -Fe shows excellent activity for hydroxyl-containing pollutants degradation. • Efficiency of H 2 O 2 depended on the synergistic effect of OVs and pollutant adsorption. [ABSTRACT FROM AUTHOR]