Search

The local measurements of electron density and temperature by Thomson scattering (TS) diagnostics are essential for research of energy confinement, plasma heating, and control at nuclear fusion devices. This paper presents a digital filter polychromator designed for TS spectrum registration. A distinguishing feature of such a digital polychromator is the use of an analog-to-digital converter (ADC) having analog memory with discretization frequency of 5 GHz and 12-bit sampling. The low heat dissipation and compact design of the ADC allow us to integrate the recording and data handling systems in the spectral unit to obtain a standalone device that is totally isolated from other systems and equipment in the voltaic sense. The scattered laser radiation received from the plasma comes to the entrance of the polychromator through a fiber-optic cable, and the processed scattering signals and calculated electron density and temperature are available on a digital interface. The polychromator was tested within the Thomson scattering system at the Globus-M tokamak using two probing lasers: Nd:YAG 1064 nm and Nd:Glass 1055 nm operating with pulse energy up to 2J and FWHM of 4 and 40 ns, respectively. The employed ADCs allowed us to perform superfast signal digitizing in the oscilloscope mode and to demonstrate the possibility of stray signal time separation despite the modest size (~1 m) of the vacuum chamber. The results of measurements performed during the plasma experiment at the Globus-M tokamak are presented, and their comparative analysis with the data obtained at the operating TS system is made.

This paper describes the challenges of Thomson Scattering implementation in the ITER divertor and evaluates the capability to satisfy project requirements related to the range of the measured electron temperature and density. A number of aspects of data interpretation are also discussed. Although this assessment and the proposed solutions are considered in terms of ITER compatibility, they may also be of some use in currently operating magnetic confinement devices.

We present here our recent results on the development and testing of the first mirrors for the divertor Thomson scattering diagnostics in ITER. The Thomson scattering system is based on several large-scale (tens of centimetres) mirrors that will be located in an area with extremely high (3–10%) concentration of contaminants (mainly hydrocarbons) and our main concern is to prevent deposition-induced loss of mirror reflectivity in the spectral range 1000–1064 nm. The suggested design of the mirrors—a high-reflective metal layer on a Si substrate with an oxide coating—combines highly stable optical characteristics under deposition-dominated conditions with excellent mechanical properties. For the mirror layer materials we consider Ag and Al allowing the possibility of sharing the Thomson scattering mirror collecting system with a laser-induced fluorescence system operating in the visible range. Neutron tests of the mirrors of this design are presented along with numerical simulation of radiation damage and transmutation of mirror materials. To provide active protection of the large-scale mirrors we use a number of deposition-mitigating techniques simultaneously. Two main techniques among them, plasma treatment and blowing-out, are considered in detail. The plasma conditions appropriate for mirror cleaning are determined from experiments using plasma-induced erosion/deposition in a CH4/H2 gas mixture. We also report data on the numerical simulation of plasma parameters of a capacitively-coupled discharge calculated using a commercial CFD-ACE code. A comparison of these data with the results for mirror testing under deuterium ion bombardment illustrates the possibility of using the capacitively-coupled discharge for in situ non-destructive deposition mitigation/cleaning.