Search

Energy piles make use of constant and moderate ground temperature for efficient thermal control of buildings. However, this use introduces new engineering challenges because the changes of temperature in the foundation pile and ground induce additional deformations and forces in the foundation element and coupled thermo-hydro-mechanical phenomena in the soil. Several published full-scale tests investigated this aspect of energy piles and showed thermally induced deformation and forces in the foundation element. In parallel, significant progress has been made in the understanding of thermal properties of soils and on the effect of cyclic thermal load on ground and foundation behavior. However, the effect of temperature on the creep rate of energy piles has received practically no attention in the past. This paper reports the experimental results of an in situ tension thermo-mechanical test on an energy pile performed in a very stiff high plasticity clay. During the in situ test, the pile was subjected to thermal loading by circulating hot water in fitted pipes, simulating a thermal load in a cooling-dominated climate, at different levels of mechanical loading. The axial strain and temperature in the pile, and the load-displacement of the pile were monitored during the tension test at different locations along the center of the pile and at the pile head, respectively. The data showed that as the temperature increases, the observed creep rate of the energy pile in this high plasticity clay also increases, which will lead to additional time-dependent displacement of the foundation over the life time of the structure. It was also found that the use of geothermal piles causes practically insignificant thermally induced deformation and loads in the pile itself. [ABSTRACT FROM AUTHOR]

Focuses on a study which examined the reliability of large-strain dynamic methods to predict the static capacity of bored piles. Schematic view of static load test; Rate effect and inertia effect in statnamic tests; Predictions of static capacity from drop weight tests.

Discusses the Lateral Wave Activated Stiffness test that had been developed to obtain the lateral static stiffness of a pile. Use of considerable software development and a large number of large scale field test as requirements of the process; Requirements needed for field test.

Focuses on developing design and construction guidelines for downdrag on uncoated and bitumen-coated piles. Bitumen selection process; Influence of temperature on viscosity; Hand calculation examples; Master curves for soft bearing pile lubricant.

Presents a simple approach for lateral load on piles (SALLOP) for the design of piles subjected to horizontal loads. Prediction of lateral pile capacity; Description of the non-linear behavior of the soil springs by the P-y curves; Zero-shear depth; Predicted versus measured lateral capacities; Prediction of deflection at working loads.

Energy piles are bi-functional foundation elements used as structural support as well as ground heat exchangers for shallow geothermal energy systems. Because they are relatively short, energy piles may be partially embedded in unsaturated soils. Saturation conditions influence the thermal properties of the ground and therefore the heat exchange rate, which in turn affects the efficiency of energy piles. This paper combines analytical, experimental and numerical investigations to evaluate the heat exchange rate of energy piles partially or fully embedded in unsaturated soils. The proposed analytical solution is based on the cylindrical heat source theory that treats the soil as a semi-infinite, homogeneous, and isotropic medium. The solution from this theory is multiplied by a function developed analytically in this paper and the outcome is the heat exchange rate for energy piles in unsaturated soils. The proposed function depends on soil saturation, soil and pile thermal properties, and pile geometry. The analytical solution was compared against a finite element solution; which was in turn validated against results from laboratory experiments. Very satisfactory agreements between the analytical, numerical and experimental outputs were observed. The proposed method can be used for a quick and simple evaluation of the efficiency of energy piles in unsaturated conditions. The proposed analytical solution can also be a useful tool for the verification of numerical codes developed for the design of energy piles in unsaturated soils. [ABSTRACT FROM AUTHOR]