Search

In this paper, a high frequency, wide band, horizontal omnidirectional ultrasonic transducer for piezoelectric composite tubes was developed. The sensing element of the ultrasonic transducer was a tri-ring stacking round tube structure. This structure is designed to increase the opening angle of the wave speed and widen the bandwidth. The test results of the ultrasonic transducer when it works in water are as follows: the central frequency is about 300 kHz, the maximum sending voltage response is 158 dB, the working bandwidth is 111.52 kHz, and the maximum receiving sensitivity is −208 dB. [ABSTRACT FROM AUTHOR]

A stacked three-phase piezoelectric composites ring array underwater ultrasound transducer was developed in this paper. The circular structure of three-phase piezoelectric composite with a large open angle was improved based on the 1-3 piezoelectric composites. The structure size of the transducer's sensitive component was designed by using ANSYS simulation software, and the single-ring samples of three-phase piezoelectric composites with different thicknesses were fabricated. Based on the bandwidth broadening theory of multimode coupled vibration, the piezoelectric composite ring-shaped sensitive component was fabricated by the piezoelectric composite curved-surface-forming process. According to the design structure of the transducer, the stacked three-phase piezoelectric composites ring array underwater ultrasound transducer was processed. The experimental results show that the maximum transmission voltage response is 154 dB, the open angle of the horizontal beam reaches 360°, and the bandwidth of −3 dB is 86 kHz. The developed transducers achieved a high frequency, broadband, and large open angle to radiate sound waves. [ABSTRACT FROM AUTHOR]

This paper describes the fabrication of 1-3 piezoelectric composites by using PZT5-A pure piezoelectric ceramics and the preparation of a high-frequency single-directional planar underwater ultrasound transducer by using the developed composites. First, three material models of the same size were designed and simulated by ANSYS finite element simulation software. Next, based on the simulation results, the 1-3 piezoelectric composites were developed. Finally, a high-frequency single-directional planar underwater ultrasound transducer was fabricated by encapsulating and gluing the 1-3 piezoelectric composites. The performance of the transducer was tested, and results showed that the device was characterized by single-mode operation in the working frequency band, a high transmitting voltage response, and single directivity. [ABSTRACT FROM AUTHOR]