Search

Mean-field modeling based on the Eshelby inclusion problem poses some difficulties when the non-linear Maxwell-type constitutive law is used for elasto-viscoplasticity. One difficulty is that this behavior involves different orders of time differentiation, which leads a long-term memory effect. One of the possible solutions to this problem is the additive interaction law. Generally, mean field models solely use the mean values of stress and strain fields per phase, while variational approaches consider the second moments of stresses and strains. It is seen that the latter approach improves model predictions allowing to account for stress fluctuation within the phases. However, the complexity of the variational formulations still makes them difficult to apply in the large scale finite element calculations and for non-proportional loadings. Thus, there is a need to include the second moments within homogenization models based on the additive interaction law. In the present study, the incorporation of the second moments of stresses into the formulation of the additive Mori-Tanaka model of two-phase elastic-viscoplastic material is discussed. A modified tangent linearization of the viscoplastic law is proposed, while the Hill-Mandel's lemma is used to track the evolution of second moments of stresses. To study the model performance and efficiency, the results are compared to the full-field numerical calculations and predictions of other models available in the literature. Very good performance of the modified tangent linearization is demonstrated from these benchmarks for both monotonic and non monotonic loading responses., Comment: 30 pages, 8 figures (preprint of accepted article send to Mechanics of Materials)

In this paper, we have investigated, using finite element calculations, the effect of initial texture on the formation of multiple necking patterns in ductile metallic rings subjected to rapid radial expansion. The mechanical behavior of the material has been modeled with the elasto-viscoplastic single crystal constitutive model developed by \citet{marin2006}. The polycrystalline microstructure of the ring has been generated using random Voronoi seeds. Both $5000$ grain and $15000$ grain aggregates have been investigated, and for each polycrystalline aggregate three different spatial distributions of grains have been considered. The calculations have been performed within a wide range of strain rates varying from $1.66 \cdot 10^4 ~ \text{s}^{-1}$ to $3.33 \cdot 10^5 ~ \text{s}^{-1}$, and the rings have been modeled with four different initial textures: isotropic texture, $\left\langle 001\right\rangle\parallel\Theta$ Goss texture, $\left\langle 001\right\rangle\parallel$ R Goss texture and $\left\langle 111\right\rangle\parallel$ Z fiber texture. The finite element results show that: (i) the spatial distribution of grains affects the location of the necks, (ii) the decrease of the grain size delays the formation of the necking pattern and increases the number of necks, (iii) the initial texture affects the number of necks, the location of the necks, and the necking time, (iv) the development of the necks is accompanied by a local increase of the slip activity. This work provides new insights into the effect of crystallographic microstructure on dynamic plastic localization and guidelines to tailor the initial texture in order to delay dynamic necking formation and, thus, to improve the energy absorption capacity of ductile metallic materials at high strain rates., Comment: 40 pages Accepted for publication in Mechanics of Materials on 3 March 2023

Anisotropic core-shell model of a nano-grained polycrystal is extended to estimate the effective elastic stiffness of several metals of hexagonal crystal lattice symmetry. In the approach the bulk nanocrystalline material is described as a two-phase medium with different properties for a grain boundary zone and a grain core. While the grain core is anisotropic, the boundary zone is isotropic and has a thickness defined by the cutoff radius of a corresponding atomistic potential for the considered metal. The predictions of the proposed meanfield model are verified with respect to simulations performed with the use of the Large-scale Atomic/Molecular Massively Parallel Simulator, the Embedded Atom Model, and the molecular statics method. The effect of the grain size on the overall elastic moduli of nanocrystalline material with random distribution of orientations is analysed., Comment: 31 pages, 24 figures. arXiv admin note: text overlap with arXiv:1908.01644

Anisotropic core-shell model of a nano-grained polycrystal, proposed recently for nanocrystalline copper, is applied to estimate elastic effective properties for a set of crystals of cubic symmetry. Materials selected for analysis differ in the lattice geometry (face-centered cubic vs. body-centered cubic) as well as the value of a Zener factor: a ratio of two shear moduli defining elastic anisotropy of a cubic crystal. The predictions are verified by means of the atomistic simulations. The dependence of the overall bulk and shear moduli on the average grain diameter is analysed. In the mean-field approach the thickness of the shell is specified by the \emph{cutoff radius} of a corresponding atomistic potential, while the grain shell is isotropic and its properties are identified by molecular simulations performed for very small grains with approximately all atoms belonging to the grain boundary zone. It is shown that the core-shell model provides predictions of satisfactory qualitative and quantitative agreement with atomistic simulations. Performed study indicates that the variation of the bulk and shear moduli with the grain size changes qualitatively when the Zener anisotropy factor is smaller or greater than one., Comment: 35 pages, 9 figures, 20 tables

The full elasticity tensor for nano-crystalline copper is derived in molecular simulations by performing numerical tests for a set of generated samples of the polycrystalline material. The results are analysed with respect to the anisotropy degree of the overall stiffness tensor resulting from the limited number of grain orientations and their spatial distribution. The dependence of the overall bulk and shear moduli of an isotropized polycrystal on the average grain diameter is analysed. It is found that while the shear modulus decreases with grain size, the bulk modulus shows negligible dependence on the grain diameter and is close to the bulk modulus of a single crystal. A closed-form mean-field model of effective elastic properties for a bulk nano-grained polycrystal with cubic grains, i.e. made of a material with cubic symmetry, is formulated. In the model all parameters are based on the data for a single crystal and on the averaged grain size without any need for additional fitting. It is shown that the proposed model provides predictions of satisfactory qualitative and quantitative agreement with atomistic simulations., Comment: 28 pages, 33 figures