Search

The FOXSI-4 sounding rocket will fly a significantly upgraded instrument in NASA's first solar are campaign. It will deploy direct X-ray focusing optics which have revolutionized our understanding of astrophysical phenomena. For example, they have allowed NuSTAR to provide X-ray imaging and IXPE (scheduled for launch in 2021) to provide X-ray polarization observations with detectors with higher photon rate capability and greater sensitivity than their predecessors. The FOXSI sounding rocket is the first solar dedicated mission using this method and has demonstrated high sensitivity and improved imaging dynamic range with its three successful flights. Although the building blocks are already in place for a FOXSI satellite instrument, further advances are needed to equip the next generation of solar X-ray explorers. FOXSI-4 will develop and implement higher angular resolution optics/detector pairs to investigate fine spatial structures (both bright and faint) in a solar are. FOXSI-4 will use highly polished electroformed Wolter-I mirrors fabricated at the NASA/Marshall Space Flight Center (MSFC), together with finely pixelated Si CMOS sensors and fine-pitch CdTe strip detectors provided by a collaboration with institutes in Japan. FOXSI-4 will also implement a set of novel perforated attenuators that will enable both the low and high energy spectral components to be observed simultaneously in each pixel, even at the high rates expected from a medium (or large) size solar are. The campaign will take place during one of the Parker Solar Probe (PSP) perihelia, allowing coordination between this spacecraft and other instruments which observe the Sun at different wavelengths.

Efficient electron (and ion) acceleration is produced in association with solar flares. Energetic particles play a major role in the active Sun since they contain a large amount of the magnetic energy released during flares. Energetic electrons (and ions) interact with the solar atmosphere and produce high-energy X-rays and γ-rays. Energetic electrons also produce radio emission in a large frequency band through gyrosynchrotron emission processes in the magnetic fields of flaring active regions and conversion of plasma waves when e.g. propagating to the high corona towards the interplanetary medium. It is currently admitted that solar flares are powered by magnetic energy previously stored in the coronal magnetic field and that magnetic energy release is likely to occur on coronal currents sheets along regions of strong gradient of magnetic connectivity. However, understanding the connection between particle acceleration processes and the topology of the complex magnetic structures present in the corona is still a challenging issue. In this talk, we shall review some recent results derived from X-ray and radio imaging spectroscopy of solar flares bringing some new observational constraints on the localization of HXR/radio sources with respect to current sheets, termination shocks in the corona derived from EUV observations.

The Spectrometer/Telescope for Imaging X-rays (STIX) is the HXR instrument onboard Solar Orbiter designed to observe solar flares over a broad range of flare sizes, between 4-150 keV. We report the first STIX observations of microflares recorded during the instrument commissioning phase in order to investigate the STIX performance at its detection limit. This first result paper focuses on the temporal and spectral evolution of STIX microflares occuring in the AR12765 in June 2020, and compares the STIX measurements with GOES/XRS, SDO/AIA, and Hinode/XRT. For the observed microflares of the GOES A and B class, the STIX peak time at lowest energies is located in the impulsive phase of the flares, well before the GOES peak time. Such a behavior can either be explained by the higher sensitivity of STIX to higher temperatures compared to GOES, or due to the existence of a nonthermal component reaching down to low energies. The interpretation is inconclusive due to limited counting statistics for all but the largest flare in our sample. For this largest flare, the low-energy peak time is clearly due to thermal emission, and the nonthermal component seen at higher energies occurs even earlier. This suggests that the classic thermal explanation might also be favored for the majority of the smaller flares. In combination with EUV and SXR observations, STIX corroborates earlier findings that an isothermal assumption is of limited validity. Future diagnostic efforts should focus on multi-wavelength studies to derive differential emission measure distributions over a wide range of temperatures to accurately describe the energetics of solar flares. Commissioning observations confirm that STIX is working as designed. As a rule of thumb, STIX detects flares as small as the GOES A class. For flares above the GOES B class, detailed spectral and imaging analyses can be performed., Comment: 19 pages, 11 figures

The Focusing Optics X-ray Solar Imager (FOXSI) sounding rocket payload achieved its third successful flight on September 7, 2018. FOXSI uses glancing-incidence Wolter-I mirrors combined with fine-pitch Si and CdTe detectors to perform direct solar Hard X-Ray (HXR) imaging spectroscopy. For FOXSI’s latest flight, several upgrades were made to the instrument, including updating the optics and detectors as well as adding new honeycomb type collimators to reduce Ghost rays background. We provide an overview of these updates as well as a discussion of their measured performance.

We study the nature of energy release and transfer for two sub-A class solar microflares observed during the second flight of the Focusing Optics X-ray Solar Imager (FOXSI-2) sounding rocket experiment on 2014 December 11. FOXSI is the first solar-dedicated instrument to utilize focusing optics to image the Sun in the hard X-ray (HXR) regime, sensitive to the energy range 4-20 keV. Through spectral analysis of the two microflares using an optically thin isothermal plasma model, we find evidence for plasma heated to temperatures of ~10 MK and emissions measures down to ~$10^{44}~$cm$^{-3}$. Though nonthermal emission was not detected for the FOXSI-2 microflares, a study of the parameter space for possible hidden nonthermal components shows that there could be enough energy in nonthermal electrons to account for the thermal energy in microflare 1, indicating that this flare is plausibly consistent with the standard thick-target model. With a solar-optimized design and improvements in HXR focusing optics, FOXSI-2 offers approximately five times greater sensitivity at 10 keV than the Nuclear Spectroscopic Telescope Array (NuSTAR) for typical microflare observations and allows for the first direct imaging spectroscopy of solar HXRs with an angular resolution at scales relevant for microflares. Harnessing these improved capabilities to study the evolution of small-scale events, we find evidence for spatial and temporal complexity during a sub-A class flare. These studies in combination with contemporanous observations by the Atmospheric Imaging Assembly onboard the Solar Dynamics Observatory (SDO/AIA) indicate that the evolution of these small microflares is more similar to that of large flares than to the single burst of energy expected for a nanoflare., 20 pages, 16 figures, 2 tables; Submitted to ApJ

Aims. The Spectrometer Telescope for Imaging X-rays (STIX) on Solar Orbiter is a hard X-ray imaging spectrometer, which covers the energy range from 4 to 150 keV. STIX observes hard X-ray bremsstrahlung emissions from solar flares and therefore provides diagnostics of the hottest (⪆10 MK) flare plasma while quantifying the location, spectrum, and energy content of flare-accelerated nonthermal electrons. Methods. To accomplish this, STIX applies an indirect bigrid Fourier imaging technique using a set of tungsten grids (at pitches from 0.038 to 1 mm) in front of 32 coarsely pixelated CdTe detectors to provide information on angular scales from 7 to 180 arcsec with 1 keV energy resolution (at 6 keV). The imaging concept of STIX has intrinsically low telemetry and it is therefore well-suited to the limited resources available to the Solar Orbiter payload. To further reduce the downlinked data volume, STIX data are binned on board into 32 selectable energy bins and dynamically-adjusted time bins with a typical duration of 1 s during flares. Results. Through hard X-ray diagnostics, STIX provides critical information for understanding the acceleration of electrons at the Sun and their transport into interplanetary space and for determining the magnetic connection of Solar Orbiter back to the Sun. In this way, STIX serves to link Solar Orbiter’s remote and in-situ measurements.

All authors: Zouganelis, I.; De Groof, A.; Walsh, A. P.; Williams, D. R.; Müller, D.; St Cyr, O. C.; Auchère, F.; Berghmans, D.; Fludra, A.; Horbury, T. S.; Howard, R. A.; Krucker, S.; Maksimovic, M.; Owen, C. J.; Rodríguez-Pacheco, J.; Romoli, M.; Solanki, S. K.; Watson, C.; Sanchez, L.; Lefort, J.; Osuna, P.; Gilbert, H. R.; Nieves-Chinchilla, T.; Abbo, L.; Alexandrova, O.; Anastasiadis, A.; Andretta, V.; Antonucci, E.; Appourchaux, T.; Aran, A.; Arge, C. N.; Aulanier, G.; Baker, D.; Bale, S. D.; Battaglia, M.; Bellot Rubio, L.; Bemporad, A.; Berthomier, M.; Bocchialini, K.; Bonnin, X.; Brun, A. S.; Bruno, R.; Buchlin, E.; Büchner, J.; Bucik, R.; Carcaboso, F.; Carr, R.; Carrasco-Blázquez, I.; Cecconi, B.; Cernuda Cangas, I.; Chen, C. H. K.; Chitta, L. P.; Chust, T.; Dalmasse, K.; D'Amicis, R.; Da Deppo, V.; De Marco, R.; Dolei, S.; Dolla, L.; Dudok de Wit, T.; van Driel-Gesztelyi, L.; Eastwood, J. P.; Espinosa Lara, F.; Etesi, L.; Fedorov, A.; Félix-Redondo, F.; Fineschi, S.; Fleck, B.; Fontaine, D.; Fox, N. J.; Gandorfer, A.; Génot, V.; Georgoulis, M. K.; Gissot, S.; Giunta, A.; Gizon, L.; Gómez-Herrero, R.; Gontikakis, C.; Graham, G.; Green, L.; Grundy, T.; Haberreiter, M.; Harra, L. K.; Hassler, D. M.; Hirzberger, J.; Ho, G. C.; Hurford, G.; Innes, D.; Issautier, K.; James, A. W.; Janitzek, N.; Janvier, M.; Jeffrey, N.; Jenkins, J.; Khotyaintsev, Y.; Klein, K. -L.; Kontar, E. P.; Kontogiannis, I.; Krafft, C.; Krasnoselskikh, V.; Kretzschmar, M.; Labrosse, N.; Lagg, A.; Landini, F.; Lavraud, B.; Leon, I.; Lepri, S. T.; Lewis, G. R.; Liewer, P.; Linker, J.; Livi, S.; Long, D. M.; Louarn, P.; Malandraki, O.; Maloney, S.; Martinez-Pillet, V.; Martinovic, M.; Masson, A.; Matthews, S.; Matteini, L.; Meyer-Vernet, N.; Moraitis, K.; Morton, R. J.; Musset, S.; Nicolaou, G.; Nindos, A.; O'Brien, H.; Orozco Suarez, D.; Owens, M.; Pancrazzi, M.; Papaioannou, A.; Parenti, S.; Pariat, E.; Patsourakos, S.; Perrone, D.; Peter, H.; Pinto, R. F.; Plainaki, C.; Plettemeier, D.; Plunkett, S. P.; Raines, J. M.; Raouafi, N.; Reid, H.; Retino, A.; Rezeau, L.; Rochus, P.; Rodriguez, L.; Rodriguez-Garcia, L.; Roth, M.; Rouillard, A. P.; Sahraoui, F.; Sasso, C.; Schou, J.; Schühle, U.; Sorriso-Valvo, L.; Soucek, J.; Spadaro, D.; Stangalini, M.; Stansby, D.; Steller, M.; Strugarek, A.; Štverák, Š.; Susino, R.; Telloni, D.; Terasa, C.; Teriaca, L.; Toledo-Redondo, S.; del Toro Iniesta, J. C.; Tsiropoula, G.; Tsounis, A.; Tziotziou, K.; Valentini, F.; Vaivads, A.; Vecchio, A.; Velli, M.; Verbeeck, C.; Verdini, A.; Verscharen, D.; Vilmer, N.; Vourlidas, A.; Wicks, R.; Wimmer-Schweingruber, R. F.; Wiegelmann, T.; Young, P. R.; Zhukov, A. N., Solar Orbiter is the first space mission observing the solar plasma both in situ and remotely, from a close distance, in and out of the ecliptic. The ultimate goal is to understand how the Sun produces and controls the heliosphere, filling the Solar System and driving the planetary environments. With six remote-sensing and four in-situ instrument suites, the coordination and planning of the operations are essential to address the following four top-level science questions: (1) What drives the solar wind and where does the coronal magnetic field originate?; (2) How do solar transients drive heliospheric variability?; (3) How do solar eruptions produce energetic particle radiation that fills the heliosphere?; (4) How does the solar dynamo work and drive connections between the Sun and the heliosphere? Maximising the mission's science return requires considering the characteristics of each orbit, including the relative position of the spacecraft to Earth (affecting downlink rates), trajectory events (such as gravitational assist manoeuvres), and the phase of the solar activity cycle. Furthermore, since each orbit's science telemetry will be downloaded over the course of the following orbit, science operations must be planned at mission level, rather than at the level of individual orbits. It is important to explore the way in which those science questions are translated into an actual plan of observations that fits into the mission, thus ensuring that no opportunities are missed. First, the overarching goals are broken down into specific, answerable questions along with the required observations and the so-called Science Activity Plan (SAP) is developed to achieve this. The SAP groups objectives that require similar observations into Solar Orbiter Observing Plans, resulting in a strategic, top-level view of the optimal opportunities for science observations during the mission lifetime. This allows for all four mission goals to be addressed. In this paper, we introduce Solar Orbiter's SAP through a series of examples and the strategy being followed. © 2020 ESO., Solar Orbiter is a space mission of international collaboration between ESA and NASA with contributions from national agencies of ESA member states. The spacecraft has been developed by Airbus and is being operated by ESA from the European Space Operations Centre (ESOC) in Darmstadt, Germany. Science operations are carried out at ESA's European Space Astronomy Centre (ESAC) in Villafranca del Castillo, Spain. SWA is an international collaboration which has been funded by the UKSA, CNES, ASI, NASA and the Czech contribution to the ESA PRODEX programme. UAH authors want to thanks the Spanish MINECO-FPI-2016 predoctoral grant with FSE, and its project FEDER/MCIU-AEEI/Proyecto ESP2017-88436-R. The Spanish contribution to SO/PHI has been funded by the Spanish Ministry of Science and Innovation through several projects, the last one being RTI2018-096886-B-C5, and by "Centro de Excelencia Severo Ochoa" programme under grant SEV-2017-0709. RAH, RCC, DMM, SPP, and AV acknowledge the support of the NASA Heliophysics Division, Solar Orbiter Collaboration Office under IAT NNG09EK11I. JEP acknowledges grant UKRI/STFC ST/N000692/1. All French involvements are supported by CNES and CNRS. DV is supported by the STFC Ernest Rutherford Fellowship ST/P003826/1 and STFC Consolidated Grant ST/S000240/1. The authors thank the referee for her constructive comments and suggestions, which led to the substantial improvement of this paper.

Imaging X-rays by direct focusing offers greater sensitivity and a higher dynamic range compared to techniques based on indirect imaging. The Focusing Optics X-ray Solar Imager (FOXSI) is a sounding rocket payload that uses seven sets of nested Wolter-I figured mirrors to observe the Sun in hard X-rays through direct focusing. Characterizing the performance of these optics is critical to optimize their performance and to understand their resulting data. In this paper, we present a ray-tracing simulation we created and developed to study Wolter-I X-ray mirrors. We validated the accuracy of the ray-tracing simulation by modeling the FOXSI rocket optics. We found satisfactory agreements between the simulation predictions and laboratory data measured on the optics. We used the ray-tracing simulation to characterize a background pattern of singly reflected rays (i.e., ghost rays) generated by photons at certain incident angles reflecting on only one of a two-segment Wolter-I figure and still reaching the focal plane. We used the results of the ray-tracing simulation to understand, and to formulate a set of strategies that can be used to mitigate, the impact of ghost rays on the FOXSI optical modules. These strategies include the optimization of aperture plates placed at the entrance and exit of the smallest Wolter-I mirror used in FOXSI, a honeycomb type collimator, and a wedge absorber placed at the telescope aperture. The ray-tracing simulation proved to be a reliable set of tools to study Wolter-I X-ray optics. It can be used in many applications, including astrophysics, material sciences, and medical imaging.

The Focusing Optics X-ray Solar Imager (FOXSI) sounding rocket experiment demonstrates the technique of focusing hard X-ray (HXR) optics for the study of fundamental questions about the high-energy Sun. Solar HXRs provide one of the most direct diagnostics of accelerated electrons and the impulsive heating of the solar corona. Previous solar missions have been limited in sensitivity and dynamic range by the use of indirect imaging, but technological advances now make direct focusing accessible in the HXR regime, and the FOXSI rocket experiment optimizes HXR focusing telescopes for the unique scientific requirements of the Sun. FOXSI has completed three successful flights between 2012 and 2018. This paper gives a brief overview of the experiment, focusing on the third flight of the instrument on 2018 Sept. 7. We present the telescope upgrades highlighting our work to understand and reduce the effects of singly reflected X-rays and show early science results obtained during FOXSI's third flight.

Nonthermal loop-top sources in solar flares are the most prominent observational signature that suggests energy release and particle acceleration in the solar corona. Although several scenarios for particle acceleration have been proposed, the origin of the loop-top sources remains unclear. Here we present a model that combines a large-scale magnetohydrodynamic simulation of a two-ribbon flare with a particle acceleration and transport model for investigating electron acceleration by a fast-mode termination shock at the looptop. Our model provides spatially resolved electron distribution that evolves in response to the dynamic flare geometry. We find a concave-downward magnetic structure located below the flare termination shock, induced by the fast reconnection downflows. It acts as a magnetic trap to confine the electrons at the looptop for an extended period of time. The electrons are energized significantly as they cross the shock front, and eventually build up a power-law energy spectrum extending to hundreds of keV. We suggest that this particle acceleration and transport scenario driven by a flare termination shock is a viable interpretation for the observed nonthermal loop-top sources., Comment: submitted to ApJL

Magnetic reconnection plays a crucial role in powering solar flares, production of energetic particles, and plasma heating. However, where the magnetic reconnections occur, how and where the released magnetic energy is transported, and how it is converted to other forms remain unclear. Here we report recurring bi-directional plasma outflows located within a large-scale plasma sheet observed in extreme ultraviolet emission and scattered white light during the post-impulsive gradual phase of the X8.2 solar flare on 2017 September 10. Each of the bi-directional outflows originates in the plasma sheet from a discrete site, identified as a magnetic reconnection site. These reconnection sites reside at very low altitudes ($< 180$ Mm, or 0.26 $R_{\odot}$) above the top of the flare arcade, a distance only $, 19 pages, 11 figures, accepted for publication in ApJ

The Focusing Optics X-ray Solar Imager (FOXSI) sounding rocket experiment aims to investigate fundamental questions about the high-energy Sun through direct imaging and spectroscopy of hard X-rays. The experiment utilizes Wolter-I type nested hard X-ray mirrors and fine-pitch semiconductor detectors, which are separated by a 2m focal length. Tol date, FOXSI has had two successful flights, on 2012 November 02 and 2014 December 11, demonstrating that the technology can measure small-scale energy releases (microflares and aggregated nanoflares) from the solar corona. The third flight for FOXSI is scheduled for August 2018. Significant improvements have been made on the FOXSI instrumentation, including upgraded optic modules with more nested mirror shells; specially designed collimators to mitigate the number of single bounce photons (ie., ghost rays) reaching the focal plane detector; and fine-pitch double-sided CdTe strip detectors to replace some of the Si-based hard X-ray detectors for better efficiency for hard X-rays. Furthermore, a CMOS based soft X-ray (SXR) instrument, “Phoenix”, will be added to FOXSI-3 by replacing one hard X-ray detector with a photon-counting SXR sensor. This will enable evaluation of the Sun via imaging spectroscopy simultaneously over a large X-ray energy range covering soft to hard X-rays. This paper will describe the overall instrument design of the FOXSI-3 experiment, which will be sensitive to solar soft and hard X-rays in the 1 – 20 keV range, as well as give a summary of insightful results and lessons from the first two flights. Possible observations for FOXSI-3 will also be discussed.

Why the tenuous solar outer atmosphere, or corona, is much hotter than the underlying layers remains one of the greatest challenge for solar modeling. Detailed diagnostics of the coronal thermal structure come from extreme ultraviolet (EUV) emission. The EUV emission is produced by heavy ions in various ionization states and depends on the amount of these ions and on plasma temperature and density. Any nonuniformity of the elemental distribution in space or variability in time affects thermal diagnostics of the corona. Here we theoretically predict ionized chemical element concentrations in some areas of the solar atmosphere, where the electric current is directed upward. We then detect these areas observationally, by comparing the electric current density with the EUV brightness in an active region. We found a significant excess in EUV brightness in the areas with positive current density rather than negative. Therefore, we report the observational discovery of substantial concentrations of heavy ions in current-carrying magnetic flux tubes, which might have important implications for the elemental fractionation in the solar corona known as the first ionization potential (FIP) effect. We call such areas of heavy ion concentration the "ion traps." These traps hold enhanced ion levels until they are disrupted by a flare whether large or small., Comment: ApJ in press; 10 pages, 5 figures

The Focusing Optics X-ray Solar Imager (FOXSI) sounding rocket experiment conducts direct imaging and spectral observation of the Sun in hard X-rays, in the energy range 4 to 20 keV. These high-sensitivity observations are used to study particle acceleration and coronal heating. FOXSI is designed with seven grazing incidence optics modules that focus X-rays onto seven focal plane detectors kept at a 2m distance. FOXSI-1 was flown with seven Double-sided Si Strip Detectors (DSSD), and two of them were replaced with CdTe detectors for FOXSI-2. The upcoming FOXSI-3 flight will carry DSSD and CdTe detectors with upgraded optics for enhanced sensitivity. The detectors are calibrated using various radioactive sources. The detector’s spectral response matrix was constructed with diagonal elements using a Gaussian approximation with a spread (sigma) that accounts for the energy resolution of the detector. Spectroscopic studies of past FOXSI flight data suggest that the inclusion of lower energy X-rays could better constrain the spectral modeling to yield a more precise temperature estimation of the hot plasma. This motivates us to carry out an improved calibration to better understand the finer-order effects on the spectral response, especially at lower energies. Here we report our improved calibration of FOXSI detectors using experiments and Monte-Carlo simulations.

In high energy solar astrophysics, imaging hard X-rays by direct focusing offers higher dynamic range and greater sensitivity compared to past techniques that used indirect imaging. The Focusing Optics X-ray Solar Imager (FOXSI) is a sounding rocket payload that uses seven sets of nested Wolter-I figured mirrors together with seven high-sensitivity semiconductor detectors to observe the Sun in hard X-rays through direct focusing. The FOXSI rocket has successfully flown twice and is funded to fly a third time in summer 2018. The Wolter-I geometry consists of two consecutive mirrors, one paraboloid and one hyperboloid, that reflect photons at grazing angles. Correctly focused X-rays reflect once per mirror segment. For extended sources, like the Sun, off-axis photons at certain incident angles can reflect on only one mirror and still reach the focal plane, generating a background pattern of singly reflected rays (i.e., ghost rays) that can limit the sensitivity of the observation to faint, focused sources. Understanding and mitigating the impact of the singly reflected rays on the FOXSI optical modules will maximize the instruments’ sensitivity to background-limited sources. We present an analysis of the FOXSI singly reflected rays based on ray-tracing simulations and laboratory measurements, as well as the effectiveness of different physical strategies to reduce them.

An accurate forecast of flare and CME initiation requires precise measurements of the magnetic energy build up and release in the active regions of the solar atmosphere. We designed a new space weather mission that performs such measurements using new optical instruments based on the Hanle and Zeeman effects. The mission consists of two satellites, one orbiting the L1 Lagrangian point (Spacecraft Earth, SCE) and the second in heliocentric orbit at 1AU trailing the Earth by 80$^\circ$ (Spacecraft 80, SC80). Optical instruments measure the vector magnetic field in multiple layers of the solar atmosphere. The orbits of the spacecraft allow for a continuous imaging of nearly 73\% of the total solar surface. In-situ plasma instruments detect solar wind conditions at 1AU and ahead of our planet. Earth directed CMEs can be tracked using the stereoscopic view of the spacecraft and the strategic placement of the SC80 satellite. Forecasting of geoeffective space weather events is possible thanks to an accurate surveillance of the magnetic energy build up in the Sun, an optical tracking through the interplanetary space, and in-situ measurements of the near-Earth environment., Accepted for publication in the Journal of Space Weather and Space Climate (SWSC)

Context. The energy released during solar flares is believed to be stored in non-potential magnetic fields associated with electric currents flowing in the corona. While no measurements of coronal electric currents are presently available, maps of photospheric electric currents can now be derived from SDO/HMI observations. Photospheric electric currents have been shown to be the tracers of the coronal electric currents. Particle acceleration can result from electric fields associated with coronal electric currents. We revisit here some aspects of the relationship between particle acceleration in solar flares and electric currents in the active region. Aims. We study the relation between the energetic electron interaction sites in the solar atmosphere, and the magnitudes and changes of vertical electric current densities measured at the photospheric level, during the X2.2 flare on February 15, 2011, in AR NOAA 11158. Methods. X-ray images from the Reuven Ramaty High Energy Solar Spectroscopic Imager (RHESSI) are overlaid on magnetic field and electric current density maps calculated from the spectropolarimetric measurements of the Helioseismic and Magnetic Imager (HMI) on the Solar Dynamics Observatory (SDO) using the UNNOFIT inversion and Metcalf disambiguation codes. X-ray images are also compared with extreme ultraviolet (EUV) images from the SDO Atmospheric Imaging Assembly (AIA) to complement the flare analysis. Results. Part of the elongated X-ray emissions from both thermal and non-thermal electrons overlay the elongated narrow current ribbons observed at the photospheric level. A new X-ray source at 50−100 keV (produced by non-thermal electrons) is observed in the course of the flare and is cospatial with a region in which new vertical photospheric currents appeared during the same period (an increase of 15%). These observational results are discussed in the context of the scenarios in which magnetic reconnection (and subsequent plasma heating and particle acceleration) occurs at current-carrying layers in the corona.