Search

Mechanisms by which subvisible cirrus clouds (SVCs) might contribute to dehydration close to the tropical tropopause are not well understood. Recently Ultrathin Tropical Tropopause Clouds (UTTCs) with optical depths around 10-4 have been detected in the western Indian ocean. These clouds cover thousands of square kilometers as 200-300 m thick distinct and homogeneous layer just below the tropical tropopause. In their condensed phase UTTCs contain only 1-5% of the total water, and essentially no nitric acid. A new cloud stabilization mechanism is required to explain this small fraction of the condensed water content in the clouds and their small vertical thickness. This work suggests a mechanism, which forces the particles into a thin layer, based on upwelling of the air of some mm/s to balance the ice particles, supersaturation with respect to ice above and subsaturation below the UTTC. In situ measurements suggest that these requirements are fulfilled. The basic physical properties of this mechanism are explored by means of a single particle model. Comprehensive 1-D cloud simulations demonstrate this stabilization mechanism to be robust against rapid temperature fluctuations of +/- 0.5 K. However, rapid warming (Delta T > 2 K) leads to evaporation of the UTTC, while rapid cooling (Delta T < -2 K) leads to destabilization of the particles with the potential for significant dehydration below the cloud

Subvisible cirrus clouds (SVCs) may contribute to dehydration close to the tropical tropopause. The higher and colder SVCs and the larger their ice crystals, the more likely they represent the last efficient point of contact of the gas phase with the ice phase and, hence, the last dehydrating step, before the air enters the stratosphere. The first simultaneous in situ and remote sensing measurements of SVCs were taken during the APE-THESEO campaign in the western Indian ocean in February/March 1999. The observed clouds, termed Ultrathin Tropical Tropopause Clouds (UTTCs), belong to the geometrically and optically thinnest large-scale clouds in the Earth's atmosphere. Individual UTTCs may exist for many hours as an only 200--300 m thick cloud layer just a few hundred meters below the tropical cold point tropopause, covering up to 105 km2. With temperatures as low as 181 K these clouds are prime representatives for defining the water mixing ratio of air entering the lower stratosphere.

The Madonna with Child by Andrea Mantegna owned by the Museo Poldi Pezzoli in Milan is painted on canvas with an unusual distemper technique. During the period of 1863–1865, the painting was restored by Giuseppe Molteni. The identification of potential retouchings by Molteni, possibly covering part of the original layer, was the object of this work carried at the Opificio delle Pietre Dure. To evaluate the extent of both Molteni’s intervention and Mantegna’s original layer, the MA-XRF spectrometer developed by CHNet-INFN was used to discriminate between the two paint layers and identify the materials and the extension of both “artists”. Indeed, the elemental maps showed that Molteni’s work entirely covered the mantle of the Virgin, even changing the fold of the draperies and enriching the red robe with shell gold highlights, giving a different appearance to the painting. Moreover, MA-XRF also revealed that the original Mantegna was still mostly intact underneath Molteni’s layer, thereby providing a decisive guide for conservation works. These results indeed formed the basis for the technical decision to remove the varnish and Molteni’s version, unveiling the original Mantegna. A second MA-XRF campaign was then carried out to fully characterise the materials of this unusual painting technique.

Analytical techniques play a fundamental role in heritage science. Among them, Particle Induced X-ray Emission (PIXE) and X-ray Fluorescence (XRF) techniques are widely used in many laboratories for elemental composition analysis. Although they are well-established, a strong effort is put on their upgrade, making them suitable for more and more applications. Over the years, at the INFN-LABEC (the laboratory of nuclear techniques for the environment and cultural heritage of the Italian National Institute of Nuclear Physics), the INFN-CHNet group, the network devoted to cultural heritage, has carried out many technological improvements to the PIXE and XRF set-ups for the analysis of works of art and archaeological finds. Among the many, we recall here the scanning external microbeam facility at the TANDEM accelerator and the MA-XRF scanner. The two instruments have shown complementary features: the former permits quantitative analysis of elements heavier than sodium, which is not possible with the latter in most of the case studies. On the contrary, the scanner has the undeniable advantage of portability, allowing it to work in situ. In this framework of technological developments in heritage science, INFN, CERN, and OPD are jointly carrying on the MACHINA (Movable Accelerator for Cultural Heritage In-situ Non-destructive Analysis) project for on-site Ion Beam Analysis (IBA) studies on cultural heritage.

At present, macro X-ray fluorescence (MA-XRF) is one of the most essential analytical methods exploited by heritage science. By providing spatial distribution elemental maps, not only does it allow for material characterisation but also to understand, or at least to have a likely idea of, the production techniques of an analysed object. INFN-CHNet, the Cultural Heritage Network of the Italian National Institute of Nuclear Physics, designed and developed a MA-XRF scanner aiming to be a lightweight, easy to transport piece of equipment for use in in situ measurements. In this study, the INFN-CHNet MA-XRF scanner was employed for the analysis of a painting by the Flemish artist Rogier van der Weyden. The painting belongs to the collection of the Uffizi gallery in Florence and was analysed during conservation treatments at the Opificio delle Pietre Dure, one of the main conservation centres in Italy. The research aims were to characterise the materials employed by the artist and to possibly understand his painting technique. Although MA-XRF alone cannot provide a comprehensive characterisation, it nonetheless proved to be an invaluable tool for providing an initial overview or hypothesis of the painting materials and techniques used.

Detectors are a key feature of the contemporary scientific approach to cultural heritage (CH), both for diagnostics and conservation. INFN-CHNet is the network of the Italian National Institute of Nuclear Physics that develops and applies new instrumentation for the study of CH. This process results in both optimized traditional state-of-the-art and highly innovative detection setups for spectrometric techniques. Examples of the former are X-rays, gamma-rays, visible-light and particles spectrometers tailored for CH applications, with optimized performances, reliability, weight, transportability, cost, absorbed power, and complementarity with other techniques. Regarding the latter, examples are ARDESIA, the array of detectors at the DAΦNE-Light facility, the MAXRS detection setup at the Riken-RAL muon beamline and the imaging facilities at the LENA Laboratory. Paths for next-generation instruments have been suggested, as in the case of the X-ray Superconductive Detectors and X-ray Microcalorimeter Spectrometers, allowing astonishing improvement in energy resolution. Many issues in CH can now be addressed thanks to scientific techniques exploiting the existing detectors, while many others are still to be addressed and require the development of new approaches and detectors.

At present, the use of non-destructive, non-invasive X-ray-based techniques is well established in heritage science for the analysis and conservation of works of art. X-ray fluorescence (XRF) plays a fundamental role since it provides information on the elemental composition, contributing to the identification of the materials present on the superficial layers of an artwork. Whenever XRF is combined with the capability of scanning an area to provide the elemental distribution on a surface, the technique is referred to as macro X-ray fluorescence (MA-XRF). The heritage science field, in which the technique is extensively applied, presents a large variety of case studies. Typical examples are paintings, ceramics, metallic objects and manuscripts. This work presents an uncommon application of MA-XRF analysis to furniture. Measurements have been carried out with the MA-XRF scanner of the INFN-CHNet collaboration at the Centro di Conservazione e Restauro “La Venaria Reale”, a leading conservation centre in the field. In particular, a chinoiserie lacquered cabinet of the 18th century and a desk by Pietro Piffetti (1701–1777) have been analysed with a focus on the characterisation of decorative layers and different materials (e.g., gilding in the former and ivory in the latter). The measurements have been carried out using a telemeter for non-planar surfaces, and with collimators of 0.8 mm and 0.4 mm diameter, depending on the spatial resolution needed. The combination of the small measuring head with the use of the telemeter and of a small collimator has guaranteed the ability to scan difficult-to-reach areas with high spatial resolution in a reasonable time (20 × 10 mm2 with 0.2 mm step in less than 20 min).