Search

Power scaling of fiber laser systems requires the development of innovative active fibers, capable of providing high pump absorption, ultralarge effective area, high-order mode suppression, and resilience to thermal effects. Thermally induced refractive index change has been recently appointed as one major limitation to the achievable power, causing degradation of the modal properties and preventing to obtain stable diffraction-limited output beam. In this paper, the effects of thermally induced refractive index change on the guiding properties of a double-cladding distributed modal filtering rod-type photonic crystal fiber, which exploits resonant coupling with high-index elements to suppress high-order modes, are thoroughly investigated. A computationally efficient model has been developed to calculate the refractive index change due to the thermo-optical effect, and it has been integrated into a full-vector modal solver based on the finite-element method to obtain the guided modes, considering different heating conditions. Results have shown that the single-mode regime of the distributed modal filtering fiber is less sensitive to thermal effects with respect to index-guiding fibers with the same effective area. In fact, as the pump power is increased, their single-mode regime is preserved, being only blue-shifted in wavelength.

Photonic crystal bandgap fibers employing distributed mode filtering design provide near diffraction-limited light outputs, a critical property of fiber-based high-power lasers. Microstructure of the fibers is tailored to achieve single-mode operation at specific wavelength by resonant mode coupling of higher-order modes. We analyze the modal regimes of the fibers having a mode field diameter of 60 µm by the cross-correlated (C(2)) imaging method in different wavelength ranges and evaluate the sensitivity of the modal content to various input-coupling conditions. As a result, we experimentally identify regimes of resonant coupling between higher-order core modes and cladding band. We demonstrate a passive fiber design in which the higher-order modal content inside the single-mode guiding regime is suppressed by at least 20 dB even for significantly misaligned input-coupling configurations.

The effects of thermally-induced refractive index change on the guiding properties of different large mode area fibers have been numerically analyzed. A simple but accurate model has been applied to obtain the refractive index change in the fiber cross-section, and a full-vector modal solver based on the finite-element method has been used to calculate the guided modes of the fibers operating at high power levels. The results demonstrate that resonant structures added to the fiber cross-section can be exploited to provide efficient suppression of high-order modes with a good resilience to thermal effects.

A large-mode-area Ytterbium-doped photonic crystal fiber amplifier with build-in gain shaping is presented. The fiber cladding consists of a hexagonal lattice of air holes, where three rows are replaced with circular high-index inclusions. Seven missing air holes define the large-mode-area core. Light confinement is achieved by combined index and bandgap guiding, which allows for single-mode operation and gain shaping through distributed spectral filtering of amplified spontaneous emission. The fiber properties are ideal for amplification in the long wavelength regime of the Ytterbium gain spectrum above 1100 nm, and red shifting of the maximum gain to 1130 nm is demonstrated.

We report on an ytterbium doped single mode distributed mode filtering rod fiber in an amplifier configuration delivering high average output power, up to 292 watts, using a mode-locked 30ps source at 1032nm with good power conversion efficiency. We study the modal stability of the output beam at high average output power levels and demonstrate a 44% power improvement before the threshold-like onset of mode instabilities by operating the rod fiber in a leaky waveguide regime. We investigate the guiding dynamics of the rod fiber and explain the improved performance by thermally induced refractive index profile change.

A large-mode-area Ytterbium-doped photonic crystal fiber amplifier with efficient suppression of amplified spontaneous emission is presented. The fiber cladding consists of a hexagonal lattice of air holes, where three rows are replaced with circular high-index inclusions. Seven missing air holes define the large-mode-area core. Light confinement is achieved by combined index and bandgap guiding, which allows for single-mode operation and distributed spectral filtering of amplified spontaneous. The fiber properties give control of the gain shape and are ideal for amplification in the long wavelength regime of the Ytterbium gain spectrum above 1100 nm.

We present recent development of photonic crystal fiber amplifiers containing photonic bandgap structures for enhanced spectral and modal filtering functionality.

We demonstrate a high power fiber (85 μm core) amplifier delivering up to 292 Watts of average output power using a mode-locked 30 ps source at 1032 nm. Utilizing a single mode distributed mode filter bandgap rod fiber, we demonstrate 44% power improvement before the threshold-like onset of mode instabilities by operating the rod fiber in a leaky waveguide regime. We investigate the guiding dynamics of the rod fiber and report a distinct bandgap blue-shifting as function of increased signal power level. Furthermore, we theoretically analyze the guiding dynamics of the DMF rod fiber and explain the bandgap blue-shifting with thermally induced refractive index change of the refractive index profile.

Dye-doped polymer photonic crystal (PhC) lasers fabricated by combined nanoimprint and photolithography are studied for their reproducibility and stability characteristics. We introduce a phase shift in the PhC lattice that substantially improves the yield of single wavelength emission. Single mode emission and reproducibility of laser characteristics are important if the lasers are to be mass produced in, e.g., optofluidic sensor chips. The fabrication yield is above 85% with highly reproducible wavelengths (within 0.5%), and the temperature dependence on the wavelength is found to be −0.045 or −0.066 nm K-1, depending on the material.

The influence of index contrast variations for obtaining single-mode operation and low threshold in dye doped polymer two dimensional photonic crystal (PhC) lasers is investigated. We consider lasers made from Pyrromethene 597 doped Ormocore imprinted with a rectangular lattice PhC having a cavity in the middle of the crystal structure. We demonstrate that the index contrast, neff,high/neff,low, is an essential parameter for achieving low threshold, and we identify a trade-off between low threshold and single-mode operation.

In this work, a thorough numerical analysis of the impact of thermally-induced waveguide changes on the Single-Mode (SM) regime of the distributed modal filtering (DMF) photonic crystal fiber (PCF) has been performed by employing a full-vector modal solver based on the finite-element method, capable of taking into account the refractive index change on the fiber cross-section due to thermo-optic effect. Simulation results have been compared with those obtained for other rod-type fibers with a similar mode field diameter of about 65 μm.