Search

This document discusses the machine parameters and expected luminosity performance for the proposed future circular lepton collider FCC-ee. Particular emphasis is put on availability, physics run time, and efficiency. Key performance assumptions are compared with the operational experience of several past and present colliders including their injectors - LHC, LEP/LEP-2, PEP-II, KEKB, BEPCII, DAΦNE, SLC and the SPS complex., Proceedings of the 62th ICFA ABDW on High Luminosity Circular e$^+$e$^-$ Colliders, eeFACT2018, Hong Kong, China

The schemes for full-energy top-up injection into an e⁺e⁻ collider will be discussed emphasizing technical issues to be accommodated. The issues include energy stability, energy spread control, transverse emittance reduction, transverse position and angle stability, collimation, background control in the detector, detector blanking of event triggers, and bunch filling strategies. Strategies and observations from PEP-II and KEKB will be included., Proceedings of the 58th ICFA Advanced Beam Dynamics Workshop on High Luminosity Circular e^+e^- Colliders, eeFACT2016, Daresbury, UK

Future e⁺e⁻ colliders will operate with many bunches, short bunch lengths, small emittances, high currents, and small interaction point betas. The stability of the colliding beams with these characteristics will depend on detailed, high precision, and continuous measurements. The various beam measurement requirements and techniques will be discussed using PEP-II observations as a starting point., Proceedings of the 58th ICFA Advanced Beam Dynamics Workshop on High Luminosity Circular e^+e^- Colliders, eeFACT2016, Daresbury, UK

In order to maintain an optimum beam collision condition in a double ring collider such as SuperKEKB it is essential to have an orbit feedback system at the interaction point (IP). We have designed such a system based on experiences at KEKB and PEP-II. For the vertical offset and crossing angle, we will rely on the system based on the beam orbit measurement similar to that used at KEKB. For the horizontal offset, however, we will utilize the dithering system which was successfully used at PEP-II, because the horizontal beam-beam kick is very weak with the "nano-beam scheme". Some hardware devices have been already fabricated and others are in preparation. The present status of the development is reported., Proceedings of the 6th Int. Particle Accelerator Conf., IPAC2015, Richmond, VA, USA

The SuperB project is an international effort aiming at building in Italy a very high luminosity e⁺e⁻ (10³⁶ cm⁻² sec⁻¹) asymmetric collider at the B mesons cm energy. The accelerator design has been extensively studied and changed during the past year. The present design, - based on the new collision scheme, with large Piwinski angle and the use of ’crab’ sextupoles, which has been successfully tested at the DAΦNE Phi-Factory at LNF Frascati, - provides larger flexibility, better dynamic aperture and in the Low Energy Ring spin manipulation sections, needed for having longitudinal polarization of the electron beam at the Interaction Point. The Interaction Region has been further optimized in terms of apertures and reduced backgrounds in the detector. The injector complex design has been also updated. A summary of the design status, including details on lattice and spin manipulation will be presented in this paper., Proceedings of the 1st International Particle Accelerator Conference, IPAC2010, Kyoto, Japan

The ultra high luminosity B-factory (SuperB) project of INFN requires a high performance and reliable injection system, providing electrons at 4 GeV and positrons at 7 GeV, to fulfill the very tight requirements of the collider. Due to the short beam lifetime, continuous injection of electrons and positrons in both HER and LER rings is necessary to keep the average luminosity at a high level. Polarized electrons are required for experiments and must be delivered by the injection system, due to the beam lifetime shorter than the polarization build-up: they will be produced by means of a SLAC-SLC polarized gun. One or two 1 GeV damping rings are used to reduce e⁺ and e⁻ emittances. Two schemes for positron production are under study, one with electron-positron conversion at low energy (1 Gev), the second at 6 GeV with a recirculation line to bring the positrons back to the damping ring. Acceleration through the Linac is provided by a S-band RF system made of traveling wave, room temperature accelerating structures. An option to use the C-band technology is also presented., Proceedings of the 1st International Particle Accelerator Conference, IPAC2010, Kyoto, Japan