Search

Although the two active redox centers in Li-rich cathodes, including the anionic and cationic contributions, can enable Li-ion batteries to achieve outstanding specific energy, their behaviors at different current densities have not been clarified. Here, we provide a comparative study of transition metals (TMs) and oxygen redox activities by directly accessing their oxidation states in Li-rich materials operated at very different current rates. Our data reveal that the oxidation of oxygen in the near-surface region is at the same level for electrodes cycled with a wide range of current rates, indicating a reaction gradient of lattice oxygen redox reactions. The oxidation process of lattice oxygen is found to be dynamically compatible with that of the TMs. Combining the results of first principles calculations and complementary experimental findings, we propose a detailed mechanism of structural distortion from octahedral Li to tetrahedral Li and the role of oxygen vacancy in Li+ diffusion. It is found that fast delithiation occurring at high current densities can easily cause local structural transformation, leading to a limited Li+ diffusion rate and consequently suppressing rate capability.

Cation-disordered Li-excess cathodes with oxygen redox reactions are promising candidates for high-energy-density Li ion batteries. Nevertheless, the oxygen redox process that is required for the high capacity often comes with the oxygen loss, which leads to severe capacity degradation and voltage decay. In this work, we have successfully synthesized a series of Li-excess cation-disordered cathodes (Li1.2Mn0.4+xTi0.4-xO2-xFx) (0 ​≤ ​x ​≤ ​0.2) with different fluorine (F) contents. The electrochemical performance results show that the Li1.2Mn0.55Ti0.25O1.85F0.15 (LMTOF0.15) exhibits the highest reversible capacity (275 mAh g-1, under 30 ​mA ​g-1), cyclability, and voltage retentions. The mapping of resonant inelastic X-ray scattering (mRIXS) and differential electrochemical mass spectroscopy (DEMS) results reveal that the fluorination enhances the reversible lattice oxygen redox reaction while suppressing irreversible gas release and surface reactions. The X-ray Absorption Spectroscopy (XAS) during the initial two cycles shows that F-substitution alleviates the reduction of the Mn valence state during the whole (dis)charge processes in the bulk and at the surface of the material, results in higher average discharge voltage. In addition, the introduction of F improves the structural stability and suppresses local lattice distortion of the material. Therefore, LMTOF0.15 is able to cycle with smaller polarization, less interfacial side reaction and Mn dissolution, and therefore results in enhanced cyclability. This work provides a comprehensive understanding of the fluorination effect on the cationic and anionic redox activities in cation-disordered Li-excess cathodes.

Redox (reduction and oxidation) chemistry provides the fundamental basis for numerous energy-related electrochemical devices. Detecting the electrochemical redox chemistry is pivotal but challenging because it requires independent probes of the cationic and anionic redox states at different electrochemical states. The synchrotron-based soft X-ray mapping of resonant inelastic X-ray scattering (mRIXS) has recently emerged as a powerful tool for exploring such states in electrochemical devices, especially batteries. High-efficiency mRIXS covers the energy range of the absorption edge with the extra dimension of information on the emitted photon energies. In this frontier article, we review recent representative demonstrations of utilizing soft X-ray mRIXS for detecting the novel chemical state during electrochemical operation and for quantifying the cationic redox reactions through inverse partial fluorescence yield analysis (mRIXS-iPFY). More importantly, the non-divalent states of oxygen in electrodes involving oxygen redox reactions could be reliably captured by mRIXS, with its reversibility quantified by the intensity variation of the characteristic mRIXS feature through a super-partial fluorescence yield analysis (mRIXS-sPFY). These recent demonstrations inspire future perspectives on using mRIXS for studying the complex phenomena in energy materials, with both technical and scientific challenges in RIXS theory, in situ/operando experiments, and spatially resolved RIXS imaging.

Layered Li-rich Ni, Mn, Co (NMC) oxide cathodes in Li-ion batteries provide high specific capacities (>250 mAh/g) via O-redox at high voltages. However, associated high-voltage interfacial degradation processes require strategies for effective electrode surface passivation. Here, we show that an acidic surface treatment of a Li-rich NMC layered oxide cathode material leads to a substantial suppression of CO2 and O2 evolution, ∼90% and ∼100% respectively, during the first charge up to 4.8 V vs Li+/0. CO2 suppression is related to Li2CO3 removal as well as effective surface passivation against electrolyte degradation. This treatment does not result in any loss of discharge capacity and provides superior long-term cycling and rate performance in comparison to as-received, untreated materials. We also quantify the extent of lattice oxygen participation in charge compensation ("O-redox") during Li+ removal by a novel ex situ acid titration. Our results indicate that the peroxo-like species resulting from O-redox originate on the surface at least 300 mV earlier than the activation plateau region at around 4.5 V. X-ray photoelectron spectra and Mn L-edge X-ray absorption spectra of the cathode powders reveal a Li+ deficiency and a partial reduction of Mn ions on the surface of the acid-treated material. More interestingly, although the irreversible oxygen evolution is greatly suppressed through the surface treatment, O K-edge resonant inelastic X-ray scattering shows that the lattice O-redox behavior is largely sustained. The acidic treatment, therefore, only optimizes the surface of the Li-rich material and almost eliminates the irreversible gas evolution, leading to improved cycling and rate performance. This work therefore presents a simple yet effective approach to passivate cathode surfaces against interfacial instabilities during high-voltage battery operation.

As a parent compound of Li-rich electrodes, Li2MnO3 exhibits high capacity during the initial charge; however, it suffers notoriously low Coulombic efficiency due to oxygen and surface activities. Here, we successfully optimize the oxygen activities toward reversible oxygen redox reactions by intentionally introducing protons into lithium octahedral vacancies in the Li2MnO3 system with its original structural integrity maintained. Combining structural probes, theoretical calculations, and resonant inelastic X-ray scattering results, a moderate coupling between the introduced protons and lattice oxygen at the oxidized state is revealed, which stabilizes the oxygen activities during charging. Such a coupling leads to an unprecedented initial Coulombic efficiency (99.2%) with a greatly improved discharge capacity of 302 mAh g-1 in the protonated Li2MnO3 electrodes. These findings directly demonstrate an effective concept for controlling oxygen activities in Li-rich systems, which is critical for developing high-energy cathodes in batteries.

Layered Li-rich Ni, Mn, Co (NMC) oxide cathodes in Li-ion batteries provide high specific capacities (>250 mAh/g) via O-redox at high voltages. However, associated high-voltage interfacial degradation processes require strategies for effective electrode surface passivation. Here, we show that an acidic surface treatment of a Li-rich NMC layered oxide cathode material leads to a substantial suppression of CO2 and O2 evolution, ~90% and ~100% respectively, during the first charge up to 4.8 V vs. Li+/0. CO2 suppression is related to Li2CO3 removal as well as effective surface passivation against electrolyte degradation. This treatment does not result in any loss of discharge capacity and provides superior long-term cycling and rate performance compared to as-received, untreated materials. We also quantify the extent of lattice oxygen participation in charge compensation (“O-redox”) during Li+ removal by a novel ex-situ acid titration. Our results indicate that the peroxo-like species resulting from O-redox originate on the surface at least 300 mV earlier than the activation plateau region around 4.5 V. X-ray photoelectron spectra and Mn-L X-ray absorption spectra of the cathode powders reveal a Li+ deficiency and a partial reduction of Mn ions on the surface of the acid-treated material. More interestingly, although the irreversible oxygen evolution is greatly suppressed through the surface treatment, our O K-edge resonant inelastic X-ray scattering shows the lattice O-redox behavior largely sustained. The acidic treatment, therefore, only optimizes the surface of the Li-rich material and almost eliminates the irreversible gas evolution, leading to improved cycling and rate performance. This work therefore presents a simple yet effective approach to passivate cathode surfaces against interfacial instabilities during high-voltage battery operation.