Search

This paper presents the project Concentrating Photovoltaic modules using advanced technologies and cells for highest efficiencies (CPVMatch), which is funded from the European Union's Horizon 2020 research and innovation programme. V multi-junction solar cells and CPV modules. Concerning cells, novel wafer bonded four-junction solar cells made of GaInP/GaAs//GaInAs/Ge are optimized with the target of reaching 48% efficiency under concentration at the end of the project. Moreover, multi-junction solar cell technologies with advanced materials - like ternary IV element mixtures (i.e. SiGeSn) and nanostructured anti-reflective coatings - are investigated. Concerning CPV modules the project focuses on both Fresnel-based and mirror-based technologies with a target efficiency of 40% under high concentrations beyond 800x. Achromatic Fresnel lenses for improved light management without secondary optics are investigated. In addition, smart, mirror-based HCPV modules are developed, which include a new mirror-based design, the integration of high efficiency, low cost DC/DC converters and an intelligent tracking sensor (PSD sensor) at module level. A profound life-cycle and environmental assessment and the development of adapted characterization methods of new multi-junction cells and HCPV modules complete the work plan of CPVMatch. [ABSTRACT FROM AUTHOR]

In this paper we present a novel manufacturing method to produce achromatic Fresnel lenses for photovoltaic application. These achromatic lenses are capable of reaching a concentration factor three times higher than that attained by a conventional Silicone-on-Glass (SOG) Fresnel lens. The manufacturing method presented to fabricate the achromatic lens, which we refer to as Achromatic Doublet on Glass (ADG) Fresnel lens, is simple, cost-effective and highly scalable. A comprehensive ray-tracing analysis and its comparison with experimental results is presented in this work. [ABSTRACT FROM AUTHOR]

Secondary optical elements (SOEs) are used in Concentrator Photovoltaic (CPV) modules to allow the concentration ratio to exceed those typically achievable by Fresnel lenses, reducing cell costs, without sacrificing tolerance to tracking errors. One option is a "dome" SOE: a simple, single surface refractive optic that images the primary lens onto the cell while immersing it. In this article, we explore the limits of this type of SOE and propose an evolved version, which we dub the Hybrid Dome Reflector (HDR), which offers advantages especially for high concentration modules with large cells, where reflective secondaries do not offer sufficient acceptance angle, but other dielectric secondaries, such as the Dielectric Totally Internally Reflecting Concentrator DTIRC, may be too large for economical manufacture. We discuss aspects of HDR design and share selected ray-tracing simulations and experimental results. We show that the new HDR design improves acceptance angle and tolerances to manufacturing error and lens temperature as compared to a reflective SOE built while offering similar efficiencies. [ABSTRACT FROM AUTHOR]

Modules are an important part of the CPV system. By pursing, in our objective of a 35% efficiency module, we need to look forward a significant improvement in the state of the art of CPV modules since no commercial module is capable of achieving that efficiency. Achieving this efficiency will require high efficiency cells, progress in the optics lenses that are implemented in these modules, and also integration into module. Basic design of 35 % CPV module is presented considering for practical and rapid industry application. The output is 385 W while its weight is only 18 kg. In spite of its high concentration ratio reaching 1,000 X, it acceptance angle is as high as 1.1 degree. [ABSTRACT FROM PUBLISHER]

The photocurrent produced by a multijunction III-V cell is limited by the component cell of the union which yields the lowest photocurrent. The induced energy losses are quantified by the Spectral Radiation Matching Factor (SRMF), defined as the ratio between the energy produced by a III-V multijunction cell and the energy that could be produced if the subcells were current matched at any moment. Accurate SRMF estimations generally require accurate measurement of solar spectrum. Another method is to measure the spectrum using three 'isotype' cells, or single-junction cells that have the same spectral response as each of the three component cells in the multi-junction stack. That method is validated against photocurrents calculated from spectral measurements (by spectroradiometer) and broadband direct beam measurements (by pyrheliometer). Those comparisons show agreement in the results above 98% under clear-sky conditions. The difference between the two independent SRMF calculations is within 1% margin. The application of this method to the spectral measurements realized in Madrid in 2009 leads to estimate an annual current spectral mismatching of around 7%. [ABSTRACT FROM AUTHOR]