Search

Funding: H2020 European Research Council (679183); Austrian Science Fund (P29603); Seventh Framework Programme (601126); Central European Institute of Technology (7AMB17AT044); Horizon 2020 Framework Programme (731473); European Metrology Programme for Innovation and Research (17FUN06); Bundesministerium für Wissenschaft, Forschung und Wirtschaft (CZ 07 / 2017); Ministerstvo Školství, Mládeže a Telovýchovy; QuantERA (Hyper-U-P-S); QuantERA (CUSPIDOR); Linz Institute of Technology (LIT); LIT Secure and Correct Systems Lab; Bayerisches Staatsministerium für Bildung und Kultus, Wissenschaft und Kunst; Deutsche Forschungsgemeinschaft (SCHN1376 5.1). Light emission from solid-state quantum emitters is inherently prone to environmental decoherence, which results in a line broadening and in the deterioration of photon indistinguishability. Here we employ photon correlation Fourier spectroscopy (PCFS) to study the temporal evolution of such a broadening in two prominent systems: GaAs and In(Ga)As quantum dots. Differently from previous experiments, the emitters are driven with short laser pulses as required for the generation of high-purity single photons, the time scales we probe range from a few nanoseconds to milliseconds and, simultaneously, the spectral resolution we achieve can be as small as ∼ 2µeV. We find pronounced differences in the temporal evolution of different optical transition lines, which we attribute to differences in their homogeneous linewidth and sensitivity to charge noise. We analyze the effect of irradiation with additional white light, which reduces blinking at the cost of enhanced charge noise. Due to its robustness against experimental imperfections and its high temporal resolution and bandwidth, PCFS outperforms established spectroscopy techniques, such as Michelson interferometry. We discuss its practical implementation and the possibility to use it to estimate the indistinguishability of consecutively emitted single photons for applications in quantum communication and photonic-based quantum information processing. Publisher PDF

Superconducting nanowire single photon detectors (SNSPDs) are the detectors of choice in quantum optics applications due to their leading performances. To exploit their performances, great care must be devoted to efficiently couple light from a single-mode fiber to their small area, ∼10 μm in size, at cryogenic temperature (∼3K). In addition, to further improve the SNSPDs functionality, implementing the photon number resolving capability, arrays of spatially multiplexed SNSPDs, must be realized. We will discuss our results obtained for these two approaches.

We present a 72 × 60, angle-sensitive single photon avalanche diode (A-SPAD) array for lens-less 3D fluorescence lifetime imaging. An A-SPAD pixel consists of (1) a SPAD to provide precise photon arrival time where a time-resolved operation is utilized to avoid stimulus-induced saturation, and (2) integrated diffraction gratings on top of the SPAD to extract incident angles of the incoming light. The combination enables mapping of fluorescent sources with different lifetimes in 3D space down to micrometer scale. Futhermore, the chip presented herein integrates pixel-level counters to reduce output data-rate and to enable a precise timing control. The array is implemented in standard 180 nm complementary metal-oxide-semiconductor (CMOS) technology and characterized without any post-processing.

Several important advances were reported in single-photon detectors and photon-number-resolving detectors in 2011. New materials with smaller superconducting gaps were demonstrated for superconducting nanowire single-photon detectors (SNSPDs) that led to improved signal-to-noise ratios and infrared performance. Faster superconducting transition edge sensors (TESs) were demonstrated by using normal metal heat sinks. Both TESs and SNSPDs were evanescently coupled with waveguides as a step toward demonstrating quantum photonic integrated circuits. Photon-number resolution has been the goal in several demonstrations using semiconductor detectors, and recent results suggest a potential convergence of Geiger-mode and linear-mode avalanche diodes in exhibiting the high-gain, low-noise analog behavior necessary to reach this goal. There has also been progress focused on additional trends in single-photon avalanche diodes (SPADs) for high- rate counting and detector array scaling.

The novel and robust Thick GEM (THGEM) electron multiplier, coupled to a solid state photon converter, represents a promising option for instrumenting, at affordable costs, large areas with photon detectors, in particular, in Cherenkov imaging counters where single photons must be detected with high efficiency. The main goal of our project is to demonstrate the feasibility of reliable gaseous detector of single photons based on the use of THGEM multipliers, able to stably operate at high gain and high rate and to build and validate a large size prototype of such a detector. The project status and perspectives are reported; in particular attention is dedicated to the simulation and laboratory studies performed to understand the photo-electron extraction performance attainable using a solid state coated photo-cathode film onto a THGEM substrate.

The photon detectors based on MPGD (MicroPattern Gaseous Detector) represent the new generation of gaseous photon detectors. We report about an R&D programme dedicated to study both the principles and the engineering aspects of photon detectors based on Thick GEMs (THGEM) electron multipliers coupled to a CsI photoconverting coating. The goal is the development of a gaseous detector of single UV photons, able to stably operate at high gain and high rate, to provide good time resolution and insensitive to magnetic field to be used in the Cherenkov imaging counter RICH-1 of the COMPASS experiment at CERN SPS.

We are developing a single photon detector for Cherenkov imaging counters. This detector is based on the use of THGEM electron multipliers in a multilayer design. The major goals of our project are ion feedback suppression down to a few per cent, large gain, fast response, insensitivity to magnetic fields, and a large detector size. We report about the project status and perspectives. In particular, we present a systematic study of the THGEM response as a function of geometrical parameters, production techniques and the gas mixture composition. The first figures obtained from measuring the response of a CsI coated THGEM to single photons are presented. © 2009 Elsevier B.V. All rights reserved

We report here on the state of our fabrication process for Superconducting Single Photon Detectors (SSPDs). We have fabricated submicrometer SSPD structures by electron beam lithography using very thin (10 nm) NbN films deposited by DC-magnetron sputtering on different substrates and at room substrate temperature. The structures show a fast optical response (risetime < 500 ps limited by readout electronics) and interesting self-resetting features.

A 3D imager is presented, capable of capturing the depth map of an arbitrary scene. Depth is measured by computing the time-of-flight of a ray of light as it leaves the source and is reflected by the objects in the scene. The round-trip time is converted to a digital code independently for each pixel using a CMOS time-to-digital converter. To reach millimetric accuracies an array of 32/spl times/32 highly sensitive, ultra-low jitter CMOS detectors capable of detecting a single photon is used. The scene is illuminated using a cone of low power pulsed laser light, thus no mechanical scanning devices or expensive optical equipment are required.

The design and characterization of an imaging system is presented for depth information capture of arbitrary three-dimensional (3-D) objects. The core of the system is an array of 32 /spl times/ 32 rangefinding pixels that independently measure the time-of-flight of a ray of light as it is reflected back from the objects in a scene. A single cone of pulsed laser light illuminates the scene, thus no complex mechanical scanning or expensive optical equipment are needed. Millimetric depth accuracies can be reached thanks to the rangefinder's optical detectors that enable picosecond time discrimination. The detectors, based on a single photon avalanche diode operating in Geiger mode, utilize avalanche multiplication to enhance light detection. On-pixel high-speed electrical amplification can therefore be eliminated, thus greatly simplifying the array and potentially reducing its power dissipation. Optical power requirements on the light source can also be significantly relaxed, due to the array's sensitivity to single photon events. A number of standard performance measurements, conducted on the imager, are discussed in the paper. The 3-D imaging system was also tested on real 3-D subjects, including human facial models, demonstrating the suitability of the approach.