Search

Metal-halide perovskites have rapidly emerged as one of the most promising materials of the 21st century, with many exciting properties and great potential for a broad range of applications, from photovoltaics to optoelectronics and photocatalysis. The ease with which metal-halide perovskites can be synthesized in the form of brightly luminescent colloidal nanocrystals, as well as their tunable and intriguing optical and electronic properties, has attracted researchers from different disciplines of science and technology. In the last few years, there has been a significant progress in the shape-controlled synthesis of perovskite nanocrystals and understanding of their properties and applications. In this comprehensive review, researchers having expertise in different fields (chemistry, physics, and device engineering) of metal-halide perovskite nanocrystals have joined together to provide a state of the art overview and future prospects of metal-halide perovskite nanocrystal research.

All‐inorganic metal halide perovskites are highly attractive materials for optoelectronics and are typically implemented as thin films, nanocrystals, and single crystals with macroscopic and millimeter‐size dimensions. Single crystals with regular shapes in the micrometer range are less explored and present an interesting alternative when a well‐defined and spatially localized response is desired. Here, CsPbBr3 microcrystals are fabricated by simple and fast drop‐casting of a precursor solution on several substrates that for the growth process are heated to temperatures in the range from 80 to 150 °C. The microcrystals have a cubic shape and feature a pyramidal cavity on their top surface that forms due to faster growth at the edges once the growing crystal is attached to the substrate. Distinct heterogeneity in the photoluminescence (PL) and conductivity of the different facets are measured by µ‐PL and conductive atomic force microscopy experiments. Toward device applications, the authors contact single microcrystals on conductive substrates mechanically with a micromanipulator tip. They observe diode‐like current–voltage curves and good photodetector functionality, obtaining a high responsivity of 150–300 A W−1 in the blue–green spectral region under forward bias, and a sharp detection band centered around 540 nm with peak responsivity close to 0.7 A W−1 under reverse bias. [ABSTRACT FROM AUTHOR]

Gallium selenide (GaSe), a layered semiconductor of Group‐III monochalcogenides, has been recognized by the scientific community in recent years as an appealing material in the fields of photonics and (opto)electronics. Thanks to its pseudodirect bandgap and its thickness‐dependent (opto)electronic properties, GaSe has emerged as a promising candidate for the implementation of thin‐film transistors (TFTs) and photodetectors with fast response and high sensitivity. Solution processing of 2D materials provides low‐cost inks that allow the design and realization of printed electronic devices, enabling this technology to move from the laboratory to the industry. In this work, a solution‐processed GaSe‐based light‐driven transistor is presented. Liquid phase exfoliation (LPE) is used to exfoliate bulk GaSe in isopropanol, formulating a functional ink that is subsequently deposited by spray coating onto Si/SiO2 substrates. The GaSe phototransistor exhibits a p‐channel behavior with a high on/off ratio (≈103) that is gate‐voltage dependent. Moreover, the device response also depends on the illumination with a maximum responsivity of 13 A W–1 to UV–visible light and a fast response time of 35 ms. This study demonstrates that liquid phase exfoliated GaSe is a promising candidate for the design and realization of next‐generation (opto)electronic devices. [ABSTRACT FROM AUTHOR]

Metamaterials have recently established a new paradigm for enhanced light absorption in state-of-the-art photodetectors. Here, we demonstrate broadband, highly efficient, polarization-insensitive, and gate-tunable photodetection at room temperature in a novel metadevice based on gold/graphene Sierpinski carpet plasmonic fractals. We observed an unprecedented internal quantum efficiency up to 100% from the near-infrared to the visible range with an upper bound of optical detectivity of 1011 Jones and a gain up to 106, which is a fingerprint of multiple hot carriers photogenerated in graphene. Also, we show a 100-fold enhanced photodetection due to highly focused (up to a record factor of |E/E0| ≈ 20 for graphene) electromagnetic fields induced by electrically tunable multimodal plasmons, spatially localized in self-similar fashion on the metasurface. Our findings give direct insight into the physical processes governing graphene plasmonic fractal metamaterials. The proposed structure represents a promising route for the realization of a broadband, compact, and active platform for future optoelectronic devices including multiband bio/chemical and light sensors. [ABSTRACT FROM AUTHOR]

Layered semiconductors of the IIIA–VIA group have attracted considerable attention in (opto)electronic applications thanks to their atomically thin structures and their thickness‐dependent optical and electronic properties, which promise ultrafast response and high sensitivity. In particular, 2D indium selenide (InSe) has emerged as a promising candidate for the realization of thin‐film field effect transistors and phototransistors due to its high intrinsic mobility (>102 cm2 V−1 s−1) and the direct optical transitions in an energy range suitable for visible and near‐infrared light detection. A key requirement for the exploitation of large‐scale (opto)electronic applications relies on the development of low‐cost and industrially relevant 2D material production processes, such as liquid phase exfoliation, combined with the availability of high‐throughput device fabrication methods. Here, a β polymorph of indium selenide (β‐InSe) is exfoliated in isopropanol and spray‐coated InSe‐based photodetectors are demonstrated, exhibiting high responsivity to visible light (maximum value of 274 A W−1 under blue excitation 455 nm) and fast response time (15 ms). The devices show a gate‐dependent conduction with an n‐channel transistor behavior. Overall, this study establishes that liquid phase exfoliated β‐InSe is a valid candidate for printed high‐performance photodetectors, which is critical for the development of industrial‐scale 2D material‐based optoelectronic devices. [ABSTRACT FROM AUTHOR]