Search

This paper investigates the effect of alteration on the physicomechanical properties of igneous rocks used as aggregates, from various areas from Greece. The studied lithologies include serpentinized dunites, serpentinized harzburgites, serpentinized lherzolites, metamorphic gabbros, diabases, dacites and andesites. Quantitative petrographic analysis shows that the tested samples display various percentages of secondary phyllosilicate minerals. Mineral quantification of the studied rock samples was performed by using the Rietveld method on X-ray diffraction patterns. The samples were also tested to assign moisture content (w (%)), total porosity (nt (%)), uniaxial compressive strength (UCS (MPa)) and Los Angeles abrasion test (LA (%)). The influence of secondary phyllosilicate minerals on the physicomechanical behavior of the tested samples was determined using regression analysis and their derived equations. Regression analysis shows a positive relationship between the percentage of the phyllosilicate minerals of the rocks and the moisture content as well as with the total porosity values. In mafic and ultramafic rock samples, the relationships between the secondary phyllosilicate minerals and their physicomechanical properties have shown that the total amount of the secondary phyllosilicate minerals results negatively on their physicomechanical properties. On the other hand, the low percentage of phyllosilicate minerals in volcanic rocks can't be able to define their engineering properties. [ABSTRACT FROM AUTHOR]

This paper investigates the interrelationships between the engineering properties of igneous aggregate rocks from Greece with the aid of the R-mode factor analysis. The collected samples represent mafic and ultramafic rocks from the ophiolite complexes of Gerania, Guevgueli, Veria-Naousa, and Edessa as well as intermediate-acidic rocks from the surrounding areas of the complexes. Factor analysis verifies the important interdependences among the engineering parameters like physical, mechanical, geometrical, and physicochemical properties by giving statistical significance. Variations of the petrographic characteristics of the investigated rocks influence their engineering properties as well as the interdependence among them. Factor 1, which is the most representative one (~36% of the total variance), shows interdependences between certain physical, mechanical, physicochemical properties such as total porosity (nt) with moisture content (w), nt with the Los Abrasion value (LA), and the uniaxial compressive strength (UCS) with point load index Is(50). Additionally, the second factor (~27% of the total data variability) correlates physical properties such as w, nt, physicochemical properties such as the methylene blue test (MBF), mechanical properties such as UCS, Is(50), and loss on ignition (LOI), which highlights the effect of mineralogy on these properties. Lastly, Factor 3 (~14% of the total data variability) expresses the interdependence of the flakiness index (IF), which is an elongation index (IE) relative to their alteration (LOI). [ABSTRACT FROM AUTHOR]

This paper examines the effect of the aggregate type on concrete strength, and more specifically, how the petrographic characteristics of various aggregate rocks as well as their physico-mechanical properties influences the durability of C 25/30 strength class concrete. The studied aggregate rocks were derived from Veria-Naousa and Edessa ophiolitic complexes as well as granodiorite and albitite rocks from their surrounding areas in central Macedonia (Greece). Concretes were produced with constant volume proportions, workability, mixing and curing conditions using different sizes of each aggregate type. Aggregates were mixed both in dry and water saturated states in concretes. Six different types of aggregates were examined and classified in three district groups according to their physicomechanical properties, petrographic characteristics and surface texture. The classification in groups after the concrete compressive strength test verified the initial classification in the same three groups. Group I (ultramafic rocks) presented the lowest concrete strengths, depending on their high alteration degree and the low mechanical properties of ultramafic aggregates. Group II (mafic rocks and granodiorite) presented a wide range of concrete strengths, depending on different petrographic characteristics and mechanical properties. Group III (albite rocks) presented the highest concrete strengths, depending on their lowest alteration degree and their highest mechanical properties. Therefore, mineralogy and microstructure of the coarse aggregates affected the final strength of the concrete specimens. [ABSTRACT FROM AUTHOR]