Search

Organic–inorganic hybrid perovskites (OIHPs) have gained tremendous interest for their rich functional properties. However, the coexistence of more than one of ferroelectricity, ferromagnetism and ferroelasticity has been rarely found in OIHPs. Herein, we report a two‐dimensional Cr2+‐based OIHP, [3,3‐difluorocyclobutylammonium]2CrCl4 ([DFCBA]2CrCl4), which shows both ferroelectricity and ferromagnetism. It undergoes a 4/mmmFm type ferroelectric phase transition at a temperature as high as 387 K and shows multiaxial ferroelectricity with a saturate polarization of 2.1 μC cm−2. It acts as a soft ferromagnet with a Curie temperature of 32.6 K. This work throws light on the exploration of OIHPs with the coexistence of ferroelectricity and ferromagnetism for applications in future multifunctional smart devices. [ABSTRACT FROM AUTHOR]

With the capability to manipulate the built‐in field in solar cells, ferroelectricity is found to be a promising attribute for harvesting solar energy in solar cell devices by influencing associated device parameters. Researchers have devoted themselves to the exploration of ferroelectric materials that simultaneously possess strong light absorption and good electric transport properties for a long time. Here, it is presented a novel and facile approach of combining state‐of‐art light absorption and electric transport properties with ferroelectricity by the incorporation of room temperature 1D ferroelectric perovskite with 3D organic–inorganic hybrid perovskite (OIHP). The 1D/3D mixed OIHP films are found to exhibit evident ferroelectric properties. It is notable that the poling of the 1D/3D mixed ferroelectric OIHP solar cell can increase the average Voc can be increased from 1.13 to 1.16 V, the average PCE from 20.7% to 21.5%. A maximum power conversion efficiency of 22.7%, along with an enhanced fill factor of over 80% and open‐circuit voltage of 1.19 V, can be achieved in the champion device. The enhancement is by virtue of reduced surface recombination by ferroelectricity‐induced modification of the built‐in field. The maximum power point tracking measurement substantiates the retention of ferroelectric‐polarization during the continued operation. [ABSTRACT FROM AUTHOR]

Since the first perovskite CaTiO3 was discovered in 1839, the development of perovskite has a history of 180 years. The emergence of solar cells (CH3NH3)PbI3 has set off the trend of hybrid organic–inorganic perovskite (HOIP) materials. Since then, various HOIPs have sprung up and been widely used in various material devices. Among them, HOIP ferroelectrics have gained widespread attention. However, antiperovskite, as a twin brother of perovskite, has been neglected although it has similar structure with perovskite. Here, we successfully found that [C3H7FN]3[SnCl6]Cl has a three‐dimensional (3D) antiperovskite structure with the formula M3AB. Importantly, the compound exhibits obvious ferroelectric properties with an Aizu notation of 622F6 at 391 K. To the best of our knowledge, this is the first 3D hybrid organic–inorganic antiperovskite ferroelectric, which will greatly promote the development of antiperovskite families with more superior physical properties. [ABSTRACT FROM AUTHOR]

Abstract: The perovskite structure is rich in ferroelectricity. In contrast, ferroelectric antiperovskites have been scarcely confirmed experimentally since the discovery of M3AB‐type antiperovskites in the 1930s. Ferroelectricity is now revealed in an organic–inorganic hybrid X3AB antiperovskite structure, which exhibits a clear ferroelectric phase transition 6/mmmF6mm with a high Curie point of 480 K. The physical properties across the phase transition are obviously changed along with the symmetry requirements, providing solid experimental evidence for the ferroelectric phase transition. More interestingly, the discovered antiperovskite shows intense photoluminescence and triboluminescence properties. The confirmation of the triboluminescent ferroelectric antiperovskite will open new avenues to explore excellent optoelectronic properties in the antiperovskite family. [ABSTRACT FROM AUTHOR]

Inorganic perovskite ferroelectrics are widely used in nonvolatile memory elements, capacitors, and sensors because of their excellent ferroelectric and other properties. Organic ferroelectrics are desirable for their mechanical flexibility, low weight, environmentally friendly processing, and low processing temperatures. Although almost a century has passed since the first ferroelectric, Rochelle salt, was discovered, examples of highly desirable organic perovskite ferroelectrics are lacking. We found a family of metal-free organic perovskite ferroelectrics with the characteristic three-dimensional structure, among which MDABCO (N-methyl-N’-diazabicyclo[2.2.2]octonium)Ðammonium triiodide has a spontaneous polarization of 22 microcoulombs per square centimeter [close to that of barium titanate (BTO)], a high phase transition temperature of 448 kelvins (above that of BTO), and eight possible polarization directions. These attributes make it attractive for use in flexible devices, soft robotics, biomedical devices, and other applications. [ABSTRACT FROM AUTHOR]

Molecular bistable dielectric switches represent a class of highly desirable intelligent materials due to their sensitive switchable responses, simple and environmentally friendly processing, light weights, and mechanical flexibility. However, most of these switches can only work at a very low temperature, extremely limiting their potential applications. Herein, three layered organic–inorganic hybrid perovskite-type compounds of the general formula A2BX4, [NH3(CH2)2Cl]2[CdCl3Br] (1), [NH3(CH2)2Cl]2[CdCl4] (2) and [NH3(CH2)2Cl]2[CdBr4] (3), which display sensitive dielectric switching reversibility and remarkable switching anti-fatigue, have been successfully designed. Differential scanning calorimetry and dielectric measurements for 1 confirm its reversible phase transition at around 166 K. Through anion modulation, the phase transition temperatures of 2 and 3 can be greatly improved up to 237 K and 254 K, respectively. Structural analysis discloses that the phase transition temperature's shifts may result from the differences among the inorganic frameworks. Moreover, due to the significant order–disorder transitions of ammonium cations, the permittivities of 1, 2 and 3 change abruptly at around the phase transition points, making them excellent stimuli-responsive electrical switches. Such an anion-modulated method will open up new possibilities of highly efficiently tuning the phase transition temperature of molecular bistable dielectric switches. [ABSTRACT FROM AUTHOR]

Piezoelectric materials produce electricity when strained, making them ideal for different types of sensing applications. The most effective piezoelectric materials are ceramic solid solutions in which the piezoelectric effect is optimized at what are termed morphotropic phase boundaries (MPBs). Ceramics are not ideal for a variety of applications owing to some of their mechanical properties. We synthesized piezoelectric materials from a molecular perovskite (TMFM)x(TMCM)1–xCdCl3 solid solution (TMFM, trimethylfluoromethyl ammonium; TMCM, trimethylchloromethyl ammonium, 0 ≤ x ≤ 1), in which the MPB exists between monoclinic and hexagonal phases. We found a composition for which the piezoelectric coefficient d33 is ~1540 picocoulombs per newton, comparable to high-performance piezoelectric ceramics. The material has potential applications for wearable piezoelectric devices. [ABSTRACT FROM AUTHOR]

We investigated the synthesis and structural phase transition of a two-dimensional layered perovskite-type organic–inorganic hybrid compound, (cyclohexylmethylammonium) 2 SnI 4 . By systematic characterizations, we found that this compound undergoes a reversible first-order phase transition from the high-temperature space group Cmca to the low-temperature space group P 2 1 / c at around T c = 319 K. Accompanying the phase transition, dielectric bistability was also detected. The phase transition is ascribed to the order–disorder transition of the cyclohexylmethylammonium cations. It is known, the interesting electronic and optical properties in the two-dimensional Sn(II) and Pb(II) halide perovskite structures are dominated by the inorganic part. The phase transition and related physical properties observed in this work arise from the organic parts. This will enrich the chemistry of the hybrid structures by tailoring the organic moieties, and accordingly, may lead to novel multifunctional materials such as ferroelectric materials. [ABSTRACT FROM AUTHOR]