Search

The coalbed methane (CBM) productivity is directly determined by the fracture permeability during hydraulic fracturing, which is regulated by the distribution of proppants. The proppant may be unevenly distributed in the fracture because of variables like the architecture of the fracture and the characteristics of the sand‐carrying fluid. This study used two types of random functions to produce different ununiform distributions of proppant clusters in large‐scale fractures, with the aim of investigating the effect of these distributions on the overall permeability of the fracture. A model of fluid‐structure coupling is proposed. The closure of large‐scale fractures under in‐situ stress is analyzed using solid mechanics and the penalty function; the CBM flowing in proppant clusters and the high‐speed channel between them is simulated using Darcy's law and the Navier–Stokes equation, respectively; and the overall permeability of fractures is computed using the fluid pressure drop throughout the fracture and the fluid flowing velocity in the fracture's outlet. Since most CBM flows along high‐speed channels between the proppant clusters, the simulated findings show that the overall permeability of fractures with an uneven distribution of proppant clusters is significantly higher than that of the proppant cluster itself. As CBM becomes more discretely distributed, the proportion of CBM flowing within the proppant cluster continuously drops. As the permeability of the proppant cluster increases, the volume ratio of proppant clusters decreases, and the distribution of proppant clusters becomes more discrete, the overall permeability of the fracture continuously increases. [ABSTRACT FROM AUTHOR]

In order to evaluate the displacement effect of four kinds of injection media in tight oil sandstone, water, active water, CO2, N2 flooding experiments were carried out in laboratory. Online Nuclear Magnetic Resonance (NMR) spectrometers combine the advantages of NMR technology and core displacement experiments. In the displacement experiment, NMR data of different injection volumes were obtained and magnetic resonance imaging (MRI) was carried out. The results showed that micro and sub-micropores provided 62–97% of the produced crude oil. The enhanced oil recovery ratio of active water flooding was higher than that of conventional water flooding up to 10%. The recovery ratio of gas flooding in micro and sub-micropores was 60–70% higher than that of water flooding. The recovery ratio of CO2 flooding was 10% higher than that of N2 flooding. The remaining oil was mainly distributed in pores larger than 0.1 μm. Under the same permeability level, the remaining oil saturation of cores after gas flooding was 10–25% lower than water flooding. From MRI images, the displacement effects from good to bad were as follows: CO2 flooding, N2 flooding, active water flooding, and conventional water flooding. [ABSTRACT FROM AUTHOR]