Search

One of the possibilities for increasing the penetration rate of drugs through the skin is the use of vesicular systems. Currently, special attention is paid to the elastic properties of liquid-state vesicles, which are supposed to have superior properties compared to gel-state vesicles with respect to skin interactions. In this study, the effects of vesicles on hairless mouse skin, both in vivo and in vitro, were studied in relation to the composition of vesicles. The interactions of elastic vesicles containing the single chain surfactant octaoxyethylene laurate-ester (PEG-8-L) and sucrose laurate-ester (L-595) with hairless mouse skin were studied, in vivo, after non-occlusive application for 1, 3 and 6 h. The skin ultrastructure was examined by ruthenium tetroxide electron microscopy (TEM) and histology. The extent, to which vesicle constituents penetrated into the stratum corneum, was quantified by thin layer chromatography (TLC). The interactions of the elastic vesicles containing PEG-8-L and L-595 surfactants were compared with those observed after treatment with rigid vesicles containing the surfactant sucrose stearate-ester (Wasag-7). Furthermore, skin permeability experiments were carried out to investigate the effect of treatment with PEG-8-L micelles, elastic vesicles (containing PEG-8-L and L-595 surfactants) or rigid Wasag-7 vesicles on the 3H(2)O transport through hairless mouse skin, in vitro, after non-occlusive application. Treatment of hairless mouse skin with the elastic vesicles affected the ultrastructure of the stratum corneum: distinct regions with lamellar stacks derived from the vesicles were observed in intercellular spaces of the stratum corneum. These stacks disrupted the organization of skin bilayers leading to an increased skin permeability, whereas no changes in the ultrastructure of the underlying viable epidermis were observed. Treatment with rigid Wasag-7 vesicles did not affect the skin ultrastructure or skin permeability. TLC measurements showed that after 1 h of non-occlusive application of elastic or rigid vesicles, a six-fold increased amount of elastic vesicle material was present within the stratum corneum compared to rigid vesicle material. After 3 and 6 h of application the amount of PEG-8-L vesicle material in SC decreased to approximately three- and two-fold, respectively, compared to Wasag-7 vesicle material. Pretreatment of the hairless mouse skin with the elastic vesicles containing 70 mol% PEG-8-L increased the diffusion of 3H(2)O with an optimum application dose of 2.5 mg lipids/cm(2) compared to PBS pretreatment. No significant difference in the enhancement of the 3H(2)O-diffusion was observed between PEG-8-L micelles or elastic vesicles containing 30 or 70 mol% PEG-8-L. Pretreatment with the rigid Wasag-7 vesicles decreased the diffusion rate of 3H(2)O, most probably by the formation of a lipid layer on the skin surface. The effect of the elastic vesicles on the skin permeability is supported by the ultrastructural changes observed by TEM in the intercellular lipid domains. The elastic vesicles containing 70 mol% PEG-8-L disorganize the lipid bilayers thereby creating or modifying pathways for possible drug penetration.

Literature data are reviewed relevant to the decision for a biowaiver of immediate release (IR) solid oral dosage forms containing metoclopramide hydrochloride. In addition, new solubility data, obtained under Biopharmaceutics Classification System (BCS) conditions are presented. Metoclopramide HCl is conservatively assigned to BCS Class III. Taken also into consideration excipient interactions reported in metoclopramide drug products, its pharmacokinetic properties and therapeutic use and therapeutic index, a biowaiver can be recommended when: (a) the test product contains only excipients present also in metoclopramide HCl containing IR solid oral drug products approved in ICH or associated countries, for instance as presented in this paper, (b) in amounts in normal use in IR solid oral dosage forms, and (c) the test product and the comparator both comply with the criteria for very rapidly dissolving. © 2008 Wiley-Liss, Inc. and the American Pharmacists Association J Pharm Sci 97:3700–3708, 2008 [ABSTRACT FROM AUTHOR]

Literature data on the properties of chloroquine phosphate, chloroquine sulfate, and chloroquine hydrochloride related to the Biopharmaceutics Classification System (BCS) are reviewed. The available information indicates that these chloroquine salts can be classified as highly soluble and highly permeable, i.e., BCS class I. The qualitative composition of immediate release (IR) tablets containing these Active Pharmaceutical Ingredients (APIs) with a Marketing Authorization (MA) in Belgium (BE), Germany (DE), Finland (FI), and The Netherlands (NL) is provided. In view of these MA's and the critical therapeutic indication of chloroquine, it is assumed that the registration authorities had evidence that these formulations are bioequivalent to the innovator. It is concluded that IR tablets formulated with these excipients are candidates for a biowaiver. © 2005 Wiley-Liss, Inc. and the American Pharmacists Association J Pharm Sci 94:1389–1395, 2005 [ABSTRACT FROM AUTHOR]

Literature data are reviewed relevant to the decision to allow a waiver of in vivo bioequivalence (BE) testing for the approval of new multisource and reformulated immediate release (IR) solid oral dosage forms containing quinidine sulfate. Quinidine sulfate's solubility and permeability, its therapeutic use and index, pharmacokinetics, excipient interactions and reported BE/bioavailability (BA) problems were taken into consideration. The available data are not fully conclusive, but do suggest that quinidine sulfate is highly soluble and moderately to highly permeable and would likely be assigned to BCS Class I (or at worst BCS III). In view of the inconclusiveness of the data and, more important, quinidine's narrow therapeutic window and critical indication, a biowaiver based approval of quinidine containing dosage forms cannot be recommended for either new multisource drug products or for major postapproval changes (variations) to existing drug products. © 2008 Wiley-Liss, Inc. and the American Pharmacists Association J Pharm Sci 98:2238–2251, 2009 [ABSTRACT FROM AUTHOR]

Literature data relevant to the decision to allow a waiver of in vivo bioequivalence (BE) testing for the approval of new multisource and reformulated immediate release (IR) solid oral dosage forms containing rifampicin as the only Active Pharmaceutical Ingredient (API) are reviewed. Rifampicin's solubility and permeability, its therapeutic use and index, pharmacokinetics, excipient interactions and reported BE/bioavailability (BA) problems were taken into consideration. Solubility and absolute BA data indicate that rifampicin is a BCS Class II drug. Of special concern for biowaiving is that many reports of failure of IR solid oral dosage forms of rifampicin to meet BE have been published and the reasons for these failures are yet insufficiently understood. Moreover, no reports were identified in which in vitro dissolution was shown to be predictive of nonequivalence among products. Therefore, a biowaiver based approval of rifampicin containing IR solid oral dosage forms cannot be recommended for either new multisource drug products or for major scale-up and postapproval changes (variations) to existing drug products. © 2009 Wiley-Liss, Inc. and the American Pharmacists Association J Pharm Sci 98:2252–2267, 2009 [ABSTRACT FROM AUTHOR]

Literature data are reviewed on the properties of ibuprofen related to the biopharmaceutics classification system (BCS). Ibuprofen was assessed to be a BCS class II drug. Differences in composition and/or manufacturing procedures were reported to have an effect on the rate, but not the extent of absorption; such differences are likely to be detectable by comparative in vitro dissolution tests. Also in view of its therapeutic use, its wide therapeutic index and uncomplicated pharmacokinetic properties, a biowaiver for immediate release (IR) ibuprofen solid oral drug products is scientifically justified, provided that the test product contains only those excipients reported in this paper in their usual amounts, the dosage form is rapidly dissolving (85% in 30 min or less) in buffer pH 6.8 and the test product also exhibits similar dissolution profiles to the reference product in buffer pH 1.2, 4.5, and 6.8. © 2005 Wiley-Liss, Inc. and the American Pharmacists Association J Pharm Sci 94:2121-2131, 2005 [ABSTRACT FROM AUTHOR]

Literature data relevant to the decision to allow a waiver of in vivo bioequivalence (BE) testing for the approval of immediate release (IR) solid oral dosage forms containing doxycycline hyclate are reviewed. According to the Biopharmaceutics Classification System (BCS), doxycycline hyclate can be assigned to BCS Class I. No problems with BE of IR doxycycline formulations containing different excipients and produced by different manufacturing methods have been reported and hence the risk of bioinequivalence caused by these factors appears to be low. Doxycycline has a wide therapeutic index. Further, BCS-based dissolution methods have been shown to be capable of identifying formulations which may dissolve too slowly to generate therapeutic levels. It is concluded that a biowaiver is appropriate for IR solid oral dosage forms containing doxycycline hyclate as the single Active Pharmaceutical Ingredient (API) provided that (a) the test product contains only excipients present in doxycycline hyclate IR solid oral drug products approved in the International Conference on Harmonization (ICH) or associated countries; and (b) the comparator and the test products comply with the BCS criteria for “very rapidly dissolving” or, alternatively, when similarity of the dissolution profiles can be demonstrated and the two products are “rapidly dissolving.”. © 2009 Wiley-Liss, Inc. and the American Pharmacists Association J Pharm Sci 99: 1639–1653, 2010 [ABSTRACT FROM AUTHOR]

Literature data are reviewed regarding the scientific advisability of allowing a waiver of in vivo bioequivalence (BE) testing for the approval of immediate release (IR) solid oral dosage forms containing either diclofenac potassium and diclofenac sodium. Within the biopharmaceutics classification system (BCS), diclofenac potassium and diclofenac sodium are each BCS class II active pharmaceutical ingredients (APIs). However, a biowaiver can be recommended for IR drug products of each salt form, due to their therapeutic use, therapeutic index, pharmacokinetic properties, potential for excipient interactions, and performance in reported BE/bioavailability (BA) studies, provided: (a) test and comparator contain the same diclofenac salt; (b) the dosage form of the test and comparator is identical; (c) the test product contains only excipients present in diclofenac drug products approved in ICH or associated countries in the same dosage form, for instance as presented in this paper; (d) test drug product and comparator dissolve 85% in 30 min or less in 900 mL buffer pH 6.8, using the paddle apparatus at 75 rpm or the basket apparatus at 100 rpm; and (e) test product and comparator show dissolution profile similarity in pH 1.2, 4.5, and 6.8. © 2008 Wiley-Liss, Inc. and the American Pharmacists Association J Pharm Sci 98:1206–1219, 2009 [ABSTRACT FROM AUTHOR]

Literature data relevant to the decision to allow a waiver of in vivo bioequivalence (BE) testing (biowaiver) for the approval of immediate release (IR) solid oral dosage forms containing aciclovir are reviewed. Aciclovir therapeutic use and therapeutic index, pharmacokinetic properties, data related to the possibility of excipient interactions and reported BE/bioavailability (BA) studies were also taken into consideration in order to ascertain whether a biowaiver can be recommended. According to the Biopharmaceutics Classification System (BCS) and considering tablet strengths up to 400 mg, aciclovir would be BCS Class III. However, in some countries also 800 mg tablets are available which fall just within BCS Class IV. Aciclovir seems not to be critical with respect to a risk for bioinequivalence, as no examples of bioinequivalence have been identified. It has a wide therapeutic index and is not used for critical indications. Hence, if: (a) the test product contains only excipients present in aciclovir solid oral IR drug products approved in ICH or associated countries, for instance as presented in this article; and (b) the comparator and the test product both are very rapidly dissolving, a biowaiver for IR aciclovir solid oral drug products is considered justified for all tablet strengths. © 2008 Wiley-Liss, Inc. and the American Pharmacists Association J Pharm Sci 97:5061–5073, 2008 [ABSTRACT FROM AUTHOR]

Literature data relevant to the decision to allow a waiver of in vivo bioequivalence (BE) testing for the approval of immediate release (IR) solid oral dosage forms containing pyrazinamide as the only active pharmaceutical ingredient (API) are reviewed. Pyrazinamide is BCS Class III, with linear absorption over a wide dosing range. The risk of bioinequivalence is estimated to be low. Depending on the definition used, pyrazinamide can be classified as a narrow therapeutic index (NTI) drug, which is usually a caveat to biowaiving but may be deemed acceptable if the Summary of Product Characteristics (SmPCs) of the test product stipulates the need for regular monitoring of liver function. It is concluded that a biowaiver can be recommended for IR solid oral dosage only when the test product (a) contains only excipients present in pyrazinamide IR solid oral drug products approved in ICH or associated countries, (b) these excipients are present in amounts normally used in IR solid oral dosage forms, (c) the test product is very rapidly dissolving, (d) the SmPC of the test product indicates the need for monitoring of the patient's liver function. © 2008 Wiley-Liss, Inc. and the American Pharmacists Association J Pharm Sci 97:3709–3720, 2008 [ABSTRACT FROM AUTHOR]

Literature data relevant to the decision to allow a waiver of in vivo bioequivalence (BE) testing for the approval of immediate release (IR) solid oral dosage forms containing acetazolamide are reviewed. Acetazolamide's solubility and permeability characteristics according to the Biopharmaceutics Classification System (BCS), as well as its therapeutic use and therapeutic index, its pharmacokinetic properties, data related to the possibility of excipient interactions and reported BE/bioavailability (BA) problems are taken into consideration. The available data on solubility, on oral absorption and permeability are not sufficiently conclusive to classify acetazolamide with certainty. Taking a conservative approach, no biowaiver is considered justified for the registration of new multisource drug products. However, SUPAC level 1 and level 2 postapproval changes and most EU Type I variations can be approved waiving in vivo BE studies. © 2008 Wiley-Liss, Inc. and the American Pharmacists Association J Pharm Sci 97:3691–3699, 2008 [ABSTRACT FROM AUTHOR]

Literature data relevant to the decision to allow a waiver of in vivo bioequivalence (BE) testing for the approval of immediate release (IR) solid oral dosage forms containing ethambutol dihydrochloride as the only active pharmaceutical ingredient (API) are reviewed. Ethambutol dihydrochloride is a Biopharmaceutics Classification System (BCS) Class III drug with permeability properties approaching the border between BCS Class I and III. BE problems of ethambutol formulations containing different excipients and different dosages forms have not been reported and hence the risk of bioinequivalence caused by excipients is low. Ethambutol has a narrow therapeutic index related to ocular toxicity. However, as long as the prescribers' information of the test product stipulates the need for regular monitoring of ocular toxicity, the additional patient risk is deemed acceptable. It is concluded that a biowaiver can be recommended for IR solid oral dosage forms provided that the test product (a) contains only excipients present in ethambutol IR solid oral drug products approved in ICH or associated countries, for instance as presented in this paper, (b) complies with the criteria for “very rapidly dissolving” and (c) has a prescribers' information indicating the need for testing the patient's vision prior to initiating ethambutol therapy and regularly during therapy. © 2007 Wiley-Liss, Inc. and the American Pharmacists Association J Pharm Sci 97:1350–1360, 2008 [ABSTRACT FROM AUTHOR]

Literature data relevant to the decision to allow a waiver of in vivo bioequivalence (BE) testing for the approval of immediate release (IR) solid oral dosage forms containing prednisone are reviewed. Due to insufficient data prednisone cannot be definitively classified according to the current Biopharmaceutics Classification System (BCS) criteria as both the solubility and the permeability of prednisone are on the borderline of the present criteria of BCS Class I. Prednisone's therapeutic indications and therapeutic index, pharmacokinetics and the possibility of excipient interactions were also taken into consideration. Available evidence indicates that a biowaiver for IR solid oral dosage forms formulated with the excipients tabulated in this article would be unlikely to expose patients to undue risks. © 2007 Wiley-Liss, Inc. and the American Pharmacists Association J Pharm Sci 96:1480–1489, 2007 [ABSTRACT FROM AUTHOR]

Literature data relevant to the decision to allow a waiver of in vivo bioequivalence (BE) testing for the approval of immediate release (IR) solid oral dosage forms containing isoniazid as the only active pharmaceutical ingredient (API) are reviewed. Isoniazid's solubility and permeability characteristics according to the Biopharmaceutics Classification System (BCS), as well as its therapeutic use and therapeutic index, its pharmacokinetic properties, data related to the possibility of excipient interactions and reported BE/bioavailability (BA) problems were taken into consideration. Isoniazid is “highly soluble” but data on its oral absorption and permeability are inconclusive, suggesting this API to be on the borderline of BCS Class I and III. For a number of excipients, an interaction with the permeability is extreme unlikely, but lactose and other deoxidizing saccharides can form condensation products with isoniazid, which may be less permeable than the free API. A biowaiver is recommended for IR solid oral drug products containing isoniazid as the sole API, provided that the test product meets the WHO requirements for “very rapidly dissolving” and contains only the excipients commonly used in isoniazid products, as listed in this article. Lactose and/or other deoxidizing saccharides containing formulations should be subjected to an in vivo BE study. © 2006 Wiley-Liss, Inc. and the American Pharmacists Association J Pharm Sci [ABSTRACT FROM AUTHOR]

Literature data relevant to the decision to allow a waiver of in vivo bioequivalence (BE) testing for the approval of immediate release (IR) solid oral dosage forms containing cimetidine are reviewed. According to the current Biopharmaceutics Classification System (BCS), cimetidine would be assigned to Class III. Cimetidine's therapeutic use and therapeutic index, its pharmacokinetic properties, data related to the possibility of excipient interactions, and reported BE/bioavailability (BA) problems were also taken into consideration. On the basis of the overall evidence, a biowaiver can be recommended for cimetidine IR products, provided that the test product contains only those excipients reported in this paper in their usual amounts, and that the test and the comparator drug products both are “rapidly dissolving” as per BCS. © 2006 Wiley-Liss, Inc. and the American Pharmacists Association J Pharm Sci 95:974–984, 2006 [ABSTRACT FROM AUTHOR]