Search

As the world embarks on a global mission to tackle climate change, reducing carbon represents a key challenge given the escalating global warming. The U.K. is among many other nations that are determined to decarbonise all sectors and strive to achieve a net zero carbon target by 2050. While much attention has been paid to improving performance and reducing carbon emissions in electrical machines, the current research landscape focuses mainly on the thermal and electromagnetic facets. Surprisingly, carbon emissions from the production stage, especially those related to raw material consumption, remain a largely unexplored area. This paper wishes to shed light on a neglected dimension by providing a comprehensive review of carbon emissions in the manufacture of electrical machines, thus contributing significantly to the wider discourse on carbon emission reduction by comparing the carbon emission values associated with various materials commonly used for the main components of these machines. A further case study is included to assess and explore the impact of material alterations on a synchronous machine, from a carbon emission perspective. A reliable material guide will provide engineers at the design stage with the critical insight needed to make informed material selection decisions, highlighting the critical role of carbon emission values beyond conventional thermal and electromagnetic considerations, achieving sustainable and environmentally conscious electrical machine design. [ABSTRACT FROM AUTHOR]

Electric machines are widely employed in a variety of sectors, including automotive and aerospace industry. With the rising trend towards electrification in aviation, electric machines with increased power density and efficiency are becoming key enabling technologies, requiring the development of innovative design procedures. In this study, a preliminary design procedure for Surface Mounted Permanent Magnet Synchronous Machines (SPMSMs) intensively cooled by means of oil channels placed in the stator slots is proposed. The analytical derivation of SPMSM sizing equations, including the sub‐domain model and optimisation algorithm will be reported in detail. Indeed, both the electromagnetic and thermal equations of the machine are considered for the derivation of the sizing tool. As a result, the latter allows to capture variation of the machine design not only in terms of mechanical demands, such as power and speed, but also in terms of coolant characteristics, and can be effectively employed to perform trade‐off studies at a preliminary design stage. The proposed design tool will be used for a specific case study: The design of a high‐speed machine for an aerospace hydraulic actuator. The accuracy of the proposed design tool is validated for different parameters by comparing the results to experimental measurements performed on an existing 8‐pole 9‐slot prototype SPMSM. [ABSTRACT FROM AUTHOR]

This article describes a novel analytical methodology for eddy current losses simulation in the windings of permanent magnet synchronous machines. The methodology is based on subdomain modeling technique in conjunction with solving of ordinary differential equations system. The main advantage of the proposed method is high accuracy and significant reduction of simulation time in comparison with finite-element modeling (FEM) technique that is frequently used for eddy current loss modeling. The proposed model allows fast and accurate evaluation of proximity and skin effect in conductors in time domain for an arbitrary current waveform and machine duty cycle. The main difference from previously presented analytical methods is the possibility to evaluate losses for a wider range of conductors geometries, regardless their shape, dimensions, location in the stator slots, and rotor speed. The main contribution and novelty of the proposed analytical approach is simultaneous implementation of subdomain modeling technique and strands segmentation concept followed by the eddy current effect representation through the equivalent circuit. This approach allows reducing the computational time while keeping the accuracy close to the FEM result. The proposed model was compared to FEM, using different types and sizes of conductors and also validated experimentally. [ABSTRACT FROM AUTHOR]

In high performance electric machines, the increase of fundamental frequency leads to additional losses in the winding due to parasitic effects such as the associated skin and proximity effects. In the first part, this paper presents an investigation into accurate modelling of AC losses in the winding using numerical methods and their experimental verification. Then, using experimental motorette setups, this research provides a comparative study between fixed strand positioning and fixed conductor shapes on the AC losses in the winding. It is shown that the exact position of strands in the conductor is not a critical factor; however, it is very important to control the conductor shape inside the slot. In the final section of this paper, an investigation into the relationship between AC losses in the winding and copper filling factor is presented. It is shown experimentally that counter-intuitive design choices such as using a lower copper fill factor and thicker strand diameters may be beneficial in achieving the highest overall efficiency. [ABSTRACT FROM AUTHOR]

This article proposes a modular approachto the power sharing control of permanent magnet synchronous bearingless machine. The selected machine topology features a winding layout with phases distributed into nonoverlapping three phase groups, a solution whose twofold aim is to increase the fault tolerance and to allow for the radial force generation. The three phase subwindings are supplied by standard three-phase inverter, leading to a modular system architecture. A throughout explanation of the methodology used to develop the control algorithm is presented considering the torque and force control in combination with the power sharing management of the machine. Special emphasis is placed on validating the modeling hypotheses based on a finite element characterization of the machine electro-mechanical behavior. The proposed control strategy is also extended to cater the possibility of one or more inverters failure, thus validating the intrinsic advantage of the redundancy obtained by the modularity of the system. An extensive experimental test campaign is finally carried out on a prototyped multi three-phase permanent magnet synchronous drive. The obtained results validate the bearingless power sharing operation in healthy and faulty scenarios, both at steady state and under extreme transient condition. [ABSTRACT FROM AUTHOR]

In an interior permanent magnet synchronous motor (IPMSM) with segmented skewed poles, the armature reaction magnetic field (AR-MF) changes nonlinearly due to the saturation of the rotor magnetic barrier. Meanwhile, this varies under different excitation currents. As a result, it is difficult to be calculated by means of analytical methods. In this paper, the calculation model of AR-MF of IPMSM is first established by vector superposition method, without considering the saturation effect of rotor and the slotting effect of stator. In the second step, the virtual magnetic field of the rotor is introduced to quantitatively calculate the influence of local inhomogeneous saturation on the AR-MF. The latter is derived by combining both the subdomain method and equivalent magnetic circuit method. The complex relative permeance is also introduced to establish the AR-MF accounting for the stator slotting effect. To validate the AR-MF calculation method proposed, an 8-pole 48-slot IPMSM with segmented skewed poles is considered as a case study, showing a comparison by both with finite element (FE) results and the electromagnetic torque measured on a test bench. The model proposed in this paper shows high accuracy and fast computation with respect to FE analysis. [ABSTRACT FROM AUTHOR]

In the last decade, the trend toward higher efficiency and higher torque density electrical machines (EMs) without permanent magnets (PMs) for the industrial sector has rapidly increased. This work discusses the latest research and industrial advancements in synchronous reluctance machines (SynRMs), being the emergent motor topology gaining wide acceptance by many industries. This article presents an extensive literature review covering the background and evolvement of SynRM, including the most recent developments. Nowadays, SynRM has found its niche in the EM market, and the reasons for that are highlighted in this work together with its advantages and disadvantages. The key journal publications in SynRM topics are discussed presenting the biggest challenges and the latest advancements with particular regards to the design methodology. This article aims to provide a thorough overview to the research community and industry about SynRM. There is a clear potential for SynRM to take over a significant portion of the EM market in the near future to meet efficiency standards in industrial applications without the use of rare-Earth PM technology. [ABSTRACT FROM AUTHOR]

This article proposes a new duty-ratio regulation-based strategy to improve the torque performance for the direct torque control (DTC) of three-phase permanent magnet synchronous motors (PMSMs). The conventional DTC schemes utilize two hysteresis regulators that are hard to be tuned to satisfy proper torque performance for wide speed ranges because of the contrary change in the positive and the negative torque deviations of the converter's voltage vectors with the rotational speed variations. In contrast, the proposed method uses a duty-ratio regulator that considers the operating speed impact on the torque deviation of the active voltage vectors and avoids triggering those of them that produce high torque deviations, therefore reducing the torque ripple of the DTC system. Moreover, it proposes a virtual reference generator to mitigate the steady-state torque error. The proposed method provides enhanced torque control performance, meanwhile maintaining the main advantages of the conventional DTC techniques, including simple structure, fast transient response, and good robustness. The feasibility and effectiveness of the proposed strategy are verified through a detailed comparative assessment with the conventional DTC scheme and two existing duty regulation-based methods using experimental results obtained from a 0.75-kW PMSM drive system. [ABSTRACT FROM AUTHOR]

This paper is focused on the design, optimisation and control of a permanent magnet assisted synchronous reluctance machine (PMaSynRel) for low cost high efficiency household appliances, in particular a motor for washing machine. The design and optimisation of the motor aims at maximising the torque produced and power factor, while minimise torque oscillations and the losses, thus improving the efficiency. A campaign of tests has been carried out on the prototype of the optimised machine, comparing finite element results and experimental measurements as a validation of the proposed design. In addition, torque ripple measurements are confirming that the solution proposed is meeting the optimisation design targets. The outcomes of this project are demonstrating that PMaSynRel drives are a suitable candidate for white goods sector, and that the proposed design is able to boost the performance and efficiency class with respect to the state-of-the-art solutions. [ABSTRACT FROM AUTHOR]

Due to the local inhomogeneous magnetic saturation of the core of the interior permanent magnet synchronous motor (IPMSM), the magnetic field changes nonlinearly, which makes the analytical calculation of the magnetic field difficult. Therefore, the calculation of the magnetic field mostly relies on the finite element method (FEM). However, the high computation cost of FEM restricts the efficiency of the design and analysis of IPMSM. In this article, an analytical model (AM) of slotless open-circuit air-gap magnetic field (OC-AG-MF) of IPMSM with V-shaped segmented skewed poles is derived by combining the subdomain method (SDM) and the magnetic equivalent circuit (MEC) method, and then, the AM of slotted OC-AG-MF of IPMSM with V-shaped segmented skewed poles is obtained by introducing the complex relative permeance. To show the effectiveness of the novel AM, the OC-AG-MF and cogging torque of an IPMSM with V-shaped segmented skewed poles for electric vehicles are calculated by the AM and FEM, respectively. The spatial order, amplitude–frequency characteristics, and the 3-D spatial distribution of the OC-AG-MF are analyzed. Finally, the accuracy of the AM is experimentally verified by direct measurement of OC-AG-MF and no-load back electromotive force (EMF) of the motor. The AM proposed in this article is shown to accurately calculate the radial and tangential components of OC-AG-MF of IPMSM with V-shaped segmented skewed poles considering rotor magnetic bridge saturation effect and stator slotting effect. Meanwhile, the efficiency of the design and analysis of the motor is expected to be improved due to the reduced computational effort compared to the prevalent FEM. [ABSTRACT FROM AUTHOR]

This article deals with the power-sharing control of bearingless multisector and multithree-phase permanent magnet machines. The proposed control strategy allows to distribute the power flows among the three-phase inverters supplying the machine during bearingless operation of the drive. The control technique is based on the extension of the vector space decomposition modeling approach. The components producing the electromagnetic torque, i.e., the q-axis currents, are controlled independently from the d-axis ones, also with the aim of managing the power flows among the three-phase systems. Conversely, the d-axis currents are exploited for the generation of the radial forces needed to levitate the rotor, while considering the compensation of the forces caused by the q-axis currents in case of unbalanced power sharing strategy. The validity of the proposed method is confirmed by simulations and experimental tests on a prototyped bearingless multisector permanent magnet synchronous machine. The proposed approach is a contribution to the development of advanced control systems employing multiphase drives in the field of bearingless and multiport applications. [ABSTRACT FROM AUTHOR]

This paper presents a novel design concept for Synchronous Reluctance (SynRel) machines aimed at reducing the torque ripple. Two general sizing approaches based on the homothetic scaling principle are defined and compared. An in depth analysis on the torque ripple, for a wide range of scaled geometries, evaluated by finite element, has been carried out at different operating conditions. A further analysis is performed on 4 scaled geometries that have been optimized starting from 4 random rotor geometries. It is shown that the main rotor geometrical variables converge to similar values for all scaled machines. The accuracy of the proposed model is then validated by comparing the FE simulated torque ripple waveforms with the experimental data carried out, for a range of operating conditions, on a machine prototype. The outcome of this work is a fast and accurate scaling technique for the preliminary design of SynRel machines with reduced torque ripple. [ABSTRACT FROM AUTHOR]

High-speed permanent magnet machine (HSPMM) design is considered with particular attention paid to machine electromagnetic, thermal, and mechanical analyses. In this article, a 140-kW, 15 000 r/min HSPMM is designed with its power losses evaluated at first. Afterward, the machine temperature distribution is obtained based on computational fluid dynamics modeling. HSPMM is prototyped with experimental tests conducted to verify the calculation results. Mechanical strength analysis is performed for the HSPMM rotor structure with pole filler by finite-element method for the rotor at three operational conditions, while the influences from sleeve parameters on rotor strength are comprehensively studied for the HSPMM rotor at the most challenging condition. In this article, stator auxiliary slotting is extensively researched to reduce the rotor eddy current loss with little effects on machine output torque. The air gap flux density for HSPMM with auxiliary slotting is analytically predicted, while the working mechanism is illustrated in-depth. The effects from auxiliary slot dimensions, numbers and positions, on machine performances are further proposed and investigated. The experimental tests also validate the reduction of HSPMM rotor eddy current loss by the application of auxiliary slotting. [ABSTRACT FROM AUTHOR]

This article presents three-phase and single-phase open-circuit fault-tolerant control strategies of radial suspension force and torque generation for bearingless multisector surface mounted permanent magnet synchronous machines. A combined winding topology is installed in the stator so that each phase contributes to both suspension force and motoring torque production. Indeed, a triple sectored three-phase winding is employed. Each three-phase winding is supplied by a power converter to independently control the suspension force vector and torque over each sector. An analytical formulation of the force and torque generation is described considering both three-phase open-circuit and single-phase open-circuit fault conditions. The analytical models of the machine are presented in a generalized matrix form so that they can be applied to any machine with a multisector winding structure. The analytical models are then used to derive the control algorithms that allow us to control the bearingless machine when a whole three-phase winding or one phase of one or two sectors are open circuited. The theoretical analysis is verified with both finite elements analysis and experiment tests. This system shows a good open-circuit fault-tolerant capability. [ABSTRACT FROM AUTHOR]

In this article, a virtual cogging torque (VCT) control method to reduce the speed ripple of direct-drive permanent magnet synchronous machine servo system under low-speed conditions is proposed. Compared with other factors, at low speeds, the cogging torque is the main factor that deteriorates the drive performance, even induces speed oscillations. Especially in this article, due to volume limitation, the cogging torque is designed larger than normal one in order to remove the need of brake. Based on the model of permanent magnet synchronous motor, the cause and effect of the cogging torque are analyzed. Inspired by the characteristic of cogging torque, the VCT control method is proposed and investigated to significantly reduce the speed ripple at low speeds. The main idea of this proposed control method is to produce a proper VCT and continuously move the corresponding virtual stable equilibrium point to drive the rotor smoothly. In addition to the principle of this control method, its analysis and implementation are studied as well. Simulation and experimental results from the prototype demonstrate that the proposed control method is correct and valid, and it is simple and effective to smooth the speed at low-speed operations. [ABSTRACT FROM AUTHOR]

This article proposes an analytical model of modular spoke-type permanent magnet (MSTPM) machines based on air-gap field modulation (AFM) theory. Firstly, a fundamental AFM model of open-circuit MSTPM machines is introduced. The open-circuit air-gap field of MSTPM machines is determined by three fundamental elements including the primitive magnetizing magnetomotive force (MMF) produced by permanent magnet (PM), and two modulators which consist of stator and rotor permeance. The analytical MMF excited by PM (PM-MMF) can be calculated by using magnetic circuit method, while the stator and rotor permeance models are developed based on relative permeance (RP) method. Thereafter, a general model is proposed to calculate the open-circuit back electromotive force (EMF) of MSTPM machines. Further, the winding inductance model is established on the basis of equivalent magnetic circuit method and RP model. Finally, the machine performance is predicted by the analytical model, and verified by both finite element analysis (FEA) and experimental results. [ABSTRACT FROM AUTHOR]

Metallic sleeves are widely used to ensure the mechanical integrity of rotors in high-speed permanent magnet (PM) synchronous machines (HSPMSM). However, in traditional high-speed rotors, the PMs which are very weak in tensile stress cannot be well protected by sleeves. Furthermore, the material properties of both the sleeves and PMs cannot be fully used. As a result, the high-speed running range of the machines are limited by the mechanical strength for a given rotor size. In this paper, taking a 230-kW 35-kr/min prototype as an example, the mechanical strength issues of the rotor are investigated by analytical method and finite element analysis (FEA). In order to overcome the unbalanced protective effect of the sleeve and make fully use of the materials, an optimal sleeve, as well as an improved rotor structure, is presented. The comparison results show that the optimized sleeve has well balanced protective effect to the PM as well as good utilization of materials, with a resultant increase in maximum speed of nearly 40% with respect to the prototype. [ABSTRACT FROM AUTHOR]

The rotor structure of synchronous reluctance machines (SynRel) is conventionally retained mechanically by iron ribs. In this paper, a novel structure for high-speed synchronous reluctance rotor is presented. The novelty of this paper is the proof of a concept of SynRel machine without iron ribs. Structurally, the rotor iron lamination segments are embedded in an adhesive resin material with high temperature resistance and mechanical strength. Three four-pole SynRel machines have been designed with the target of improving motor torque, and compared for different ribs configuration. It has been shown that the proposed motor performs enhanced torque, power factor, and efficiency with respect to conventional SynRel with iron ribs. An extensive sensitivity analysis of the ribless rotor geometry is carried out, followed by both mechanical analysis and experimental over speed test to guarantee its robustness above the operating speed range. The manufacturing procedure of this novel rotor is introduced. Finally, the experimental results on both SynRel prototypes are presented, showing the increase in torque, power factor, and efficiency of the proposed solution. This paper is a first step toward the definition of a viable and novel solution of SynRel machines with improved performance. [ABSTRACT FROM AUTHOR]

Electrical machines for transportation applications need to be highly reliable, particularly if they drive safety-critical systems. At the same time, another main requirement is represented by the significant torque density, especially for aerospace, where weight constraints are extremely stringent. For achieving high peak torque, an effective strategy consists in supplying the windings with a current greater than the rated value; thus, thermally overloading the machine for limited time periods. However, if the insulation is overheated, the machine lifetime is shortened and reliability issues can arise. This paper experimentally investigates the influence of short-time thermal overload on the insulation lifetime for low voltage, random wound electrical machines. The analysis is performed on round enameled magnet wire coils, which are aged by accelerated thermal cycles. The obtained results are statistically processed through a two parameter Weibull distribution. According to the findings of the experimental data postprocessing, a lifetime prediction model is built. This model is employed for predicting the lifetime consumption of a motor embedded into an electromechanical actuator for aerospace application. [ABSTRACT FROM AUTHOR]

In this article, a novel post fault control algorithm based on the space vector method is presented and applied to a bearingless multisector permanent magnet synchronous machine with a triple three-phase winding. First, the expressions of the current space vectors, as a function of the electromagnetic suspension force and motoring torque, are introduced. Then, the open-circuit fault is described and a new post-fault algorithm is introduced. The introduced post-fault algorithm, based on the minimization of the stator copper losses, is compared at simulation level with an existing one, where the above-mentioned loss minimization was not considered. The simulation results show a remarkable improvement in the performance when the novel post-fault algorithm is employed. Finally, the developed control algorithm is experimentally validated on a prototype of a bearingless multisector permanent magnet synchronous machine. [ABSTRACT FROM AUTHOR]

Torque motor is one key component that directly influences the dynamic performance of jet pipe servo valve in aircraft. In this paper, a novel torque motor with hybrid-magnetization pole arrays is proposed. By changing the magnetization patterns of permanent magnets, the torque motor can significantly improve the output torque by range of 47–52% compared with traditional designs, while maintaining the system size and mass. The design concept and operating principle of the torque motor is presented. The magnetic field distribution is formulated analytically with equivalent magnetic circuit. Different from conventional study, the flux leakage of the permanent magnets and coils is included to improve the model precision. Subsequently, the output torque is derived mathematically from the airgap flux. Following that, the numerical calculation is conducted to validate the mathematical models of magnetic field and output torque. The design optimization is then carried out. One research prototype that can be mounted with either conventional magnet or the proposed hybrid array has been developed. The test rigs are constructed and experiments are conducted on the prototype. Both numerical computation and experimental results verify the significant improvement of torque generation of the proposed hybrid magnetization torque motor. [ABSTRACT FROM AUTHOR]

In the design of electrical machines, the increase in power density has become one of the main research themes. With most of the power loss in high power density electrical machines often being generated in the stator winding assembly, it is necessary to reduce these losses. The effects of strands and bundle positions in the slot on the ac losses in the winding are often overlooked. Taking as a case-study an existing high-frequency machine, this article analyzes and provides an in-depth insight into such effects. Exploiting the rapid advancements in precision three-dimensional printing, it is found and experimentally verified that by controlling the position of the conductors within the top of the slot the ac losses can be markedly reduced. [ABSTRACT FROM AUTHOR]

The longitudinal end effect of the double-sided permanent magnet linear synchronous motor (DS-PMLSM) causes a large end force. To overcome this drawback, this paper proposes a novel DS-PMLSM structure, in which the upper or lower primary component is shifted by a certain distance. First, the end-force model of the DS-PMLSM is established, based on which, the influences of the staggered structure on the fundamental and higher order end-force components are analyzed. Following this, the DS-PMLSMs with different slot–pole combinations are divided into four categories, and the design principles of possible winding arrangements are discussed. Furthermore, the staggered structures are applied to four slot–pole combinations, namely 21-, 15-, 20-, and 16-pole/18-slot. The back electromotive forces, detent forces, thrusts, and normal forces of the four combinations are analyzed and compared through the finite-element method. The electromagnetic and output characteristics of the novel DS-PMLSM are also compared with the traditional DS-PMLSM prototype to verify the effect of the proposed structure on suppressing the end force. [ABSTRACT FROM AUTHOR]

This article describes the development of an exact analytical model for predicting magnetic field distribution within active parts of a dual-rotor (DR) permanent magnet (PM) synchronous machine with a Halbach array. The model is based on the accurate solution of Laplace’s and Poisson’s partial differential equations (PDEs) using a method of separation of variables. The model also allows the calculation of the DR machine flux linkage, back electromotive force (bEMF), and electromagnetic torque at on load and cogging torque at a no-load condition. The model can be used at the initial stage of designing a DR PM machine for the estimation of electromagnetic parameters and the optimization of machine geometry. [ABSTRACT FROM AUTHOR]

This paper focuses on the comparative analysis of modular spoke-type permanent magnet machines with two magnetization modes, which are referred to as M-I and M-II types. The analytical models of the proposed machines are built based on the simple magneto-motive-force-permeance method. With the help of finite element analysis and the analytical models, magnetic fields in machines with different magnetization modes are compared. Then, taking as a base an existing commercial in-wheel machine used in an electric motorcycle, two proposed machines with different magnetization modes are designed as in-wheel traction machines and compared with respect to electromagnetic torque, flux-weakening performance, over-load capability, etc. The machines are prototyped and experimentally tested to verify the prediction that the M-II machines exhibit a higher torque output whereas the M-I machines have a wider speed range. [ABSTRACT FROM AUTHOR]

Phase-shift or pole-shift method can reduce the detent force of the double-sided permanent magnet linear synchronous motor (DS-PMLSM) dramatically. However, this method causes a decrease in thrust and an increase in normal force simultaneously. To overcome this drawback, a novel slot-shift structure whose slots on the two sides of the primary component are staggered by an optimal distance is proposed in this paper. The models of the detent force including the end force and cogging force is established theoretically, and then verified by finite element analysis. The windings in the upper primary and the lower primary are arranged differently to improve the average thrust. The thrust characteristics of the DS-PMLSM under different shifted distances are analyzed and compared in detail. Furthermore, the primary component employing two kinds of core laminations is proposed to reduce both the dc component and ripple of the normal force. Finally, a DS-PMLSM prototype is tested, and the experimental results are compared with the analytical results to verify the effectiveness of the theoretical and simulation research. [ABSTRACT FROM AUTHOR]

This paper proposes an integrated method of three-phase ac excitation and high-frequency voltage signal injection (HFVSI) for sensorless controlled starting of brushless synchronous machines (BSM) used as starter/generator in variable frequency ac power systems of civil aircraft. Fixed 400 Hz of the three-phase ac power is adopted both for the ac excitation and HFVSI in the initial starting process to eliminate the bulky rotor position sensor for BSM. The resulting 6th sequence harmonic voltage determined by the rotating rectifier is utilized as the HFVSI into the field-winding of main generator without any extra high-frequency signal injection. The rotor position is estimated by the high-frequency response signals extracted from the armature windings of main generator. Due to the nonlinear rotating rectifier linked in the HFSI chain, a novel frequency-insensitive asynchronous demodulation strategy is proposed in this paper for rotor position estimation. Furthermore, the initial rotor position detection is calibrated by polarity decision of the induced currents of the armature windings within the establishment procedure of field current of the main generator at standstill. The effectiveness of the ac excitation and feasibility of rotor position estimation for sensorless starting control of BSM are validated by the simulation and experimental results. [ABSTRACT FROM AUTHOR]

By developing a simple permeance-magnetomotive force (MMF) model of switched-flux permanent magnet (SFPM) machines, the air-gap flux density produced by both PMs and armature current can be derived, in which harmonics with the same order and rotational speed are called an effective harmonic pair (EHP). By investigating the influences of armature current angle $\delta $ on both the phase and amplitude of each EHP, it is found that the amplitudes of both PM and armature reaction flux-density harmonics maintain fixed, whereas the space phase shift between them changes accordingly with armature current angle. Specifically, the PM and armature reaction flux-density harmonics are orthogonal in space if zero ${d}$ -axis current is fed. Therefore, the maximal torque is realized for each EHP. As the total torque of SFPM machines is the superposition of the contributions by each EHP, the zero ${d}$ -axis current control method turns out to be the optimum for maximal torque per ampere, thus verifying analytically that the ${d}$ - and ${q}$ -axes inductances are equal according to the general torque equation for the investigated machine topology. In addition, the torque adjustment mechanism of each EHP in SFPM machines has also been analytically demonstrated to be resemble that of the surface-mounted PM synchronous machine (PMSM). Finally, the finite-element analysis (FEA) has been performed to validate the previous analytical predictions. [ABSTRACT FROM AUTHOR]

The use of solid materials in tubular, linear machines has significant manufacturing benefits, as this removes the need for an axially laminated stator. However, this comes at the cost of extra eddy current losses. In this paper, a detailed analysis of the behavior of eddy currents in a tubular permanent magnet machine that comprises unconventional magnetic circuit is given, highlighting the importance of the field distribution and current directions, when compared with conventional magnetic circuits. This analysis is then used to identify and investigate the appropriate eddy current reduction methods for tubular machines, when a solid material stator is being used. Accurate three-dimensional models have been built and then validated on previously built testing setups. Different winding configurations have been accounted. Finally, considerations of these techniques are given when being implemented into an actual, tubular machine design, highlighting the improved performance and losses. [ABSTRACT FROM AUTHOR]

An often-overlooked aspect during the development process of electrical machines is the validity and accuracy of the machine material properties being used at the design stage. Designers usually consider the data provided by the material supplier, which are measured on material in an unprocessed state. However, the fact that the machining processes required to produce the finished product (e.g., the stator core) can permanently vary the material properties is very often neglected. This paper, therefore, deals with and investigates the effects that such processes can have on the overall machine performance. To do this, three sets of material data, the material suppliers’ data, material data based on conventional characterization methods, and material data based on test samples that include the manufacturing processes, are used to develop three versions of the same baseline machine. The results of these three machines are then compared, and the resulting variations of the machine's performance are presented and described. The chosen baseline machine is a high-performance and relatively high speed, aerospace, electrical machine. Special attention is focused on the efficiency maps of the machine, as this aspect is highly dependent on the material properties that are the most sensitive to manufacturing processes such as the material's anhysteretic B–H curve and its specific core loss. [ABSTRACT FROM AUTHOR]

This paper investigates high-speed surface PM machine design for portable turbo-generator applications. The rotor radius is fixed to achieve certain optimal characteristics of the magnet retention mechanism. The objective of this paper is to design and select the stator. The stator designs are populated by different slot/pole combinations, winding arrangements, and over a range of possible stack lengths. However, the design is constrained by physical diameter, stack length, and electrical volt–ampere constraints. A large number of preliminary machine designs do not satisfy the specified turbo-generator torque/speed requirements under the given volt–ampere constraints and therefore it is ineffective to perform finite element analysis on all preliminary design variations. In order to establish the feasibility of a machine design to fulfill the specified turbo-generator torque/speed requirements, the concept of inductance-limits is presented and then linked with stator design parameters. By application of this analysis strategy, a confined optimal set of stator designs are obtained and are subjected to detailed finite element simulations. A final machine design is selected and fabricated. Experimental results are presented for the validation of the final machine design. [ABSTRACT FROM AUTHOR]

This paper investigates the effect of two soft magnetic materials on a high-speed machine design, namely, 6.5% silicon steel and cobalt–iron alloy. The effect of design parameters on the machine performance as an aircraft starter-generator is analyzed. The material properties which include B-H characteristics and the losses are obtained at different frequencies under an experiment and used to predict the machine performance accurately. In the investigation presented in this paper, it is shown that machines designed with 6.5% silicon steel at a high core flux density has lower weight and lower losses than the cobalt–iron alloy designs. This is mainly due to the extra weight contributed by the copper content especially in the end-windings. Due to the high operating frequencies, the core losses in the cobalt–iron machine designs are found to outweigh the copper losses incurred in the silicon steel machines. It is also shown that change in stack length/number of turns has a considerable effect on the copper losses at starting, however has no significant advantage on rated efficiency which happens to be in a field-weakening operating point. It is also shown that the performance of the machine designs depends significantly on material selection and the operating point of the core. The implications of the variation of design parameters on the machine performance is discussed and provide insight into the influence of parameters that effect overall power density. [ABSTRACT FROM PUBLISHER]

This paper investigates the influence of the slot/pole (S/P) combination on inter-turn short-circuit (SC) current in fault-tolerant permanent magnet (FT-PM) machines. A 2-D sub-domain field computational model with multi-objective genetic algorithm is used for the design and performance prediction of the considered FT-PM machines. The electromagnetic losses of machines, including iron, magnet, and winding losses are systematically computed using analytical tools. During the postprocessing stage, a 1-D analysis is employed for turn–turn fault analysis. The method calculates self- and mutual inductances of both the faulty and healthy turns under an SC fault condition with respect to the fault locations, and thus SC fault current, considering its location. Eight FT-PM machines with different S/P combinations are analyzed. Both the performance of the machine during normal operation and induced currents during a turn–turn SC fault are investigated. To evaluate the thermal impact of each S/P combination under an inter-turn fault condition, a thermal analysis is performed using finite element computation. It is shown that low-rotor-pole-number machines have a better fault tolerance capability, while high-rotor-pole-number machines are lighter and provide higher efficiency. Results show that the influence of the S/P selection on inter-turn fault SC current needs to be considered during the design process to balance the efficiency and power density against fault-tolerant criteria of the application at hand. [ABSTRACT FROM AUTHOR]

The power converter control system has a great impact on the behavior of the high-speed permanent magnet generator system (HSPGS) due to the high operating frequency. In this paper, a 3-D modeling based on finite-element analysis directly coupled with a power converter control system is built in order to accurately evaluate generator performance. The influence of the control system current time harmonics on the 3-D flux distribution, the vector eddy current in rotor sleeve, and the iron loss of the machine are investigated. The analytical model is validated by experimental test results from a developed prototype of the HSPGS. The obtained results could provide a reference for the system-level design and investigation for the HSPGS in the further design. [ABSTRACT FROM AUTHOR]

This paper proposes and investigates an analytical method for assessing the risk of potential irreversible demagnetization in the permanent magnets (PMs) of electrical machines equipped with $n$ -stages, Halbach arrays. The higher risk of demagnetization, synonymous with Halbach arrays, imposes that the method be both load and temperature dependent. In fact, the proposed method studies the magnetic field distribution in the air gap and PM region, for various operating temperatures and expresses these fields as analytical expressions for the no-load and peak-load conditions. The model can cater for Halbach arrays with up to $n$ stages, thus making it a versatile tool that can be utilized for various Halbach configurations. Finite-element analysis is used to validate the method. The analytical tool is then used for the design and analysis of a high torque density, outer rotor, traction motor. The motor is for an aerospace application and its operating duty cycle imposes very high, short-time, peak-load conditions at elevated temperatures, posing an elevated risk of irreversible PM demagnetization. The model is used to investigate various Halbach configurations for this application, in order to reduce the demagnetization risk and also to improve the general performance of the machine. The analytical method thus provides a computationally efficient tool that can be used to predict and prevent demagnetization in Halbach-equipped electrical machines operating in harsh environments such as the aerospace sector. [ABSTRACT FROM AUTHOR]

This paper details the design considerations of a permanent-magnet three-phase synchronous machine for fault-tolerant operation. A multidisciplinary approach to the optimal design of the machine is adopted, targeted at minimizing the additional losses resulting from faulty operating conditions and accounting for the remedial control strategy implemented. The design of a closed-slot six-slot four-pole machine is presented. The machine is prototyped and tested to validate the analytical–computational performances predicted in the design and analysis stage under healthy and faulty conditions. [ABSTRACT FROM AUTHOR]

This paper investigates the behavior of a vector-controlled fault-tolerant permanent magnet motor drive system adopting a vertically placed strip winding (VSW) which can limit interturn short-circuit (SC) fault current to its rated value regardless of the position in the slot containing the shorted turns. The drives' dynamic behavior is simulated using a per-phase equivalent circuit model, with the winding inductances and resistances analytically calculated based on the machine geometry and fault location. A simplified thermal model is also grafted into the system model to effectively simulate the dynamic behavior of the machine during healthy interturn SC fault and postfault controlled scenarios. The SC-fault-current-limiting capability, the additional losses, and the thermal behavior of the winding are studied and compared with conventional winding adopting round conductor winding. The proposed winding design is verified with finite-element analysis and is then validated experimentally. Results show that the VSW inherently limits the SC current, reduces its dependence on the position of the fault within the slot, but results in an increase in ac losses. [ABSTRACT FROM PUBLISHER]

Safety and reliability of electrical actuators are essential for success of all electric and more electric aircrafts (MEA). Torque limiters improve the reliability of electromechanical actuators (EMA) by restricting the amount of force experienced by the actuator drive train components. If transmitted torque in the shaft exceeds a limit, it gives way in a controlled manner. This protects the actuator from potential failure and jamming. In this paper, different types of existing torque limiters are investigated for their suitability in aerospace EMA application and further integration within the electric motor. They classified based on the torque transmission mechanism and each type is described in detail. Operating principle and basic characteristics are reported. Comparative evaluation of commercially available devices is presented. It is found that those based on friction based and permanent magnet are most suitable due to their good torque density, reliability and high speed capability. Further, based on the characteristics, integration of torque limiter within the actuator motor is investigated in this paper. An example actuator motor is considered for integration. Different integration options suitable for the different types of torque limiting devices are described. Reduction in overall volume is shown for the integration options. Such integration can lead to improved reliability as well as higher power density resulting in next-generation actuator electrical drives for MEA. [ABSTRACT FROM AUTHOR]

The laminated rotor Induction Machine (IM), with its simple construction and manufacturing, robustness, ease of control and comparatively lower cost remains by far the most utilized electromechanical energy converter. At very high speeds, traditionally its use is considered to be limited to the previously established operational limits of 2.5 × 105 rpm√kW, beyond which the surface Permanent Magnet (PM) Machine and the solid rotor Induction Machine become the machines available for consideration. The aforesaid limits are derived from the use of classic materials. This paper reviews the recent developments in electrical steels and copper alloys and translates these into the resulting performance entitlement and operational limits through a case study involving a marine application, for which an existing rare-earth PM machine is in use. It is concluded that with novel materials, laminated rotor induction machines can be operated up to 6 × 105 rpm√kW, thus opening the use of the rare-earth free Induction Machine for a wider application range previously limited to PM machines. [ABSTRACT FROM AUTHOR]

A novel fault-tolerant flux-switching permanent-magnet synchronous machine drive topology is presented, which is able to operate during open- and short-circuit winding and converter faults. The scheme is based on a dual winding motor supplied from two separate vector-controlled voltage-sourced inverter drives. The windings are arranged in a way so as to form two independent and isolated sets. Simulation and experimental work will detail the drive's performance during both healthy and faulty scenarios including short-circuit faults and will show the drive robustness to operate in these conditions. [ABSTRACT FROM PUBLISHER]

This paper describes an analytical model to evaluate the short-circuit (SC) current resulting from an interturn fault by computing the self and mutual inductances under SC fault condition. Two different concentrated winding configurations, i.e., horizontally and vertically placed conductors in the slot of a fault-tolerant permanent magnet synchronous machine are considered. By computing the associated slot-leakage and air-gap fluxes, the self inductance of both healthy and faulty windings as well as the mutual inductance between them, the SC current can be determined for any position and number of shorted turns. The proposed model is verified with finite-element analysis and validated experimentally. It will be shown that the magnitude of an interturn SC current depends on both the number of shorted turns and their position in the slot. The measured SC inductance shows that a new proposed concentrated vertical winding configuration can inherently limit the SC current and reduce its dependence on the position within the slot. [ABSTRACT FROM PUBLISHER]

This paper describes a brushless dc (BLDC) drive with a single sided matrix converter (SSMC) for an electrohydrostatic actuation system in aerospace application. The use of an SSMC with a BLDC motor is novel and is used to achieve operation without a microprocessor. A simple hysteresis current control strategy is implemented to control motor torque. The multiphase SSMC provides high reliability and fault tolerance with the penalty of more power devices. A five-phase SSMC prototype is built. The experiment results are presented to verify the drive performance. [ABSTRACT FROM AUTHOR]

Electric and hybrid-electric aircraft propulsion are rapidly revolutionising mobility technologies. Air travel has become a major focus point with respect to reducing greenhouse gas emissions. The electrification of aircraft components can bring several benefits such as reduced mass, environmental impact, fuel consumption, increased reliability and quicker failure resolution. Propulsion, actuation and power generation are the three key areas of focus in more electric aircraft technologies, due to the increasing demand for power-dense, efficient and fault-tolerant flight components. The necessity of having environmentally friendly aircraft systems has promoted the aerospace industry to use electrically powered drive systems, rather than the conventional mechanical, pneumatic or hydraulic systems. In this context, this paper reviews the current state of art and future advances in more electric technologies, in conjunction with a number of industrially relevant discussions. In this study, a permanent magnet motor was identified as the most efficient machine for aircraft subsystems. It is found to be 78% and 60% more power dense than switch-reluctant and induction machines. Several development methods to close the gap between existing and future design were also analysed, including the embedded cooling system, high-thermal-conductivity insulation materials, thin-gauge and high-strength electrical steel and integrated motor drive topology. [ABSTRACT FROM AUTHOR]

This paper looks at the requirements and challenges of designing a permanent-magnet (PM) motor for a directly driven electromechanical actuator for aerospace applications. Having a directly driven system, the intermediate gearbox is eliminated, bringing advantages in terms of lower component count and reduced jamming probability. The design of a low-speed high pole number PM motor will be investigated as a potential solution. The main goals of the design are a high level of actuator integration in order to minimize weight and volume, fault tolerance, and high reliability. The design will be tailored to the requirements of a typical midspoiler actuation system for a large civil aircraft. [ABSTRACT FROM AUTHOR]

Permanent magnet synchronous machines provide many dramatic electromagnetic performances such as high efficiency and high power density, which make them more competitive in aircraft electrification, whereas, designing a permanent magnet starter–generator (PMSG), with given consideration to fault tolerance (FT), is a significant challenge and requires great effort. In this paper, a comprehensive FT PMSG design process is proposed which is applied to power systems of turboprops. Firstly, potential slot/pole combinations were selected based on winding factor, harmonic losses and manufacture issues. Then, pursuing high power density, a multiple objective optimization process was carried out to comprehensively rank performances. To meet a fault tolerance target, electrical, magnetic and thermal isolation topologies were investigated and compared, among which 18 slot/12 pole with dual three-phase was selected as the optimal one, with a power density of 7.9 kW/kg. Finally, a finite element analysis verified the performance in normal and post-fault scenarios. The candidate machine has merits concerning high power density and post-fault performance. [ABSTRACT FROM AUTHOR]

In several industrial sectors, induction machines are being replaced with permanent magnet based alternatives, owing to the potential for higher power density and efficiency. However, high-speed applications feature a wide flux-weakening region, where advanced induction machines could bring benefits in terms of system-level optimization. This paper gives an overview the technological challenges for high-speed drives with induction machines, materials, simulations and future challenges for the power electronics in these applications. The target application is a high-speed induction machine for a naval turbocharging system. The comparison with permanent magnet synchronous machines will demonstrate how the extended flux weakening operation effectively allows for a weight reduction of the overall system. [ABSTRACT FROM AUTHOR]